Stefan Mitsche

Oberrat Dipl.-Ing. Dr.techn.

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2003 2019

2007

Crack behaviour of the Nickel based alloy 80A during hot forming

Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007, Modern developments and applications in Microbeam Analysis. ., p. 287-287

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determination of isothermal flow curves and the dynamic recrystallization kinetic of the nickel-basis superalloy Allvac 718 PlusTM by means of rastegaev specimens

Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 10 Sep 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EBSD - Some experimental and some fundamental problems

Pölt, P., Mitsche, S. & Sommitsch, C., 2007, Proc. Electron Backscatter Diffraction 2007. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD - Some experimental and some fundamental problems

Pölt, P., Mitsche, S. & Sommitsch, C., 2007.

Research output: Contribution to conferencePosterResearch

Fundamental aspects of oligo-phenylen adsorption and thin film layer growth on gold surfaces

Müllegger, S., Frank, P., Salzmann, I., Haber, T., Resel, R., Hlawacek, G., Teichert, C., Hänel, K., Strunskus, T., Wöll, C., Mitsche, S., Pölt, P. & Winkler, A., 2007, Winterschool on organic electronics. ., p. 64-64

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Interaction of recrystallization and precipitation during hot forming of alloy 80A

Sommitsch, C., Pölt, P., Rüf, G., Mitsche, S. & Albu, M., 2007, In : Materials Science Forum. 539-543, p. 2988-2993

Research output: Contribution to journalArticleResearchpeer-review

Oligo-phenylen adsorption and thin film layer growth on gold surfaces

Müllegger, S., Frank, P., Salzmann, I., Haber, T., Resel, R., Hlawacek, G., Teichert, C., Hänel, K., Strunskus, T., Wöll, C., Mitsche, S., Pölt, P. & Winkler, A., 2007, Wilhelm and Else Heraeus Seminar. ., p. 1-ff

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Precipitation in 9-12% Cr steels

Mendez Martin, F., Albu, M., Sonderegger, B. & Mitsche, S., 2007, Graz: Technische Universität Graz. (Performance Report)

Research output: Book/ReportOther reportResearch

Recrystallization behaviour of the nickel-based alloy 80A during hot forming

Mitsche, S., Pölt, P. & Sommitsch, C., 2007, In : Journal of microscopy. 3, 227, p. 267-274

Research output: Contribution to journalArticleResearchpeer-review

The E(SEM) - A microanalytical tool and a microlab

Pölt, P., Mitsche, S., Reichmann, A. & Zankel, A., 2007, Proceedings 8th Multinational Congress on Microscopy. ., p. 55-58

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The ESEM - A microanalytical tool and a microlab

Pölt, P., Reichmann, A., Mitsche, S. & Zankel, A., 17 Jun 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Time Dependent Study of Ion- and Electron Currents under Water Vapour Conditions

Rattenberger, J., Wagner, J., Schröttner, H., Schaffer, M., Mitsche, S. & Zankel, A., 2007, 14.Tagung Festkörperanalytik. ., p. P1-P1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Time Dependent Study of Ion- and Electron Currents under Water Vapour Conditions

Rattenberger, J., Wagner, J., Schröttner, H., Schaffer, M., Mitsche, S. & Zankel, A., 2007.

Research output: Contribution to conferencePosterResearch

Time Resolved Measurements of Ion- and Electron Currents in an ESEM

Wagner, J., Rattenberger, J., Schröttner, H., Schaffer, M., Mitsche, S. & Zankel, A., 2007.

Research output: Contribution to conferencePosterResearch

Time Resolved Measurements of Ion- and Electron Currents in an ESEM

Wagner, J., Rattenberger, J., Schröttner, H., Schaffer, M., Mitsche, S. & Zankel, A., 2007, In : Microscopy and microanalysis. 13, 3, p. 082-083

Research output: Contribution to journalArticleResearchpeer-review

2008

Ausscheidungskinetik während der Homogenisierung und Gefügeentwicklung während der Warmumformung der Aluminiumlegierung AA6082

Sherstnev, P., Sommitsch, C., Mitsche, S., Hacksteiner, M. & Ebner, T., 2008, Verformungskundliches Kolloquium. ., p. 123-130

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sommitsch, C., Ebner, T., Sherstnev, P. & Hacksteiner, M., 2008.

Research output: Contribution to conferencePosterResearch

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sherstnev, P., Sommitsch, C., Ebner, T. & Hacksteiner, T., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 579-580 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters

Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A. & Sommitsch, C., 2008, ESAFORM Conference on Material Forming. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

DualBeam FIB application of 3D EDXS for superalloy δ-phase characterization

Wagner, J., Schaffer, M., Schröttner, H., Mitsche, S., Letofsky-Papst, I., Stotter, C. & Sommitsch, C., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 687-688 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Enzymatic hydrolysis of PTT polymers and oligomers

Eberl, A., Heumann, S., Kotek, R., Kaufmann, F., Mitsche, S., Cavaco-Paulo, A. & Gübitz, G., 2008, In : Journal of Biotechnology. 135, 1, p. 45-51

Research output: Contribution to journalArticleResearchpeer-review

Experimental determination of the total scattering cross section of water vapour and of the effective beam gas path length in a low vacuum scanning electron microscope

Rattenberger, J., Wagner, J., Schröttner, H., Mitsche, S., Schaffer, M. & Zankel, A., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 601-602 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations of retained deformation energy after hot forming and its influence on the abnormal grain growth of the nickel based alloy 80A

Candic, M., Tian, B., Kleber, S., Mitsche, S. & Sommitsch, C., 2008, TMS Annual Meeting. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure modeling of the dynamic recystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718Plus

Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 2008.

Research output: Contribution to conferencePosterResearch

Microstructure modeling of the dynamic recystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718Plus

Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Ebner, T., 2008, Superalloys2008. ., p. 855-861

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modellierung der Rekristallisationskinetik während der Warmumformung der Aluminiumlegierung 5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, In : Berg- und hüttenmännische Monatshefte. 153, 11, p. 439-442

Research output: Contribution to journalArticleResearchpeer-review

Modelling of Structure Evolution during Hot Working of AA5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, Aluminium Alloys - their Physical and Mechanical Properties ; Vol. 1. Wiley-VCH , p. 1077-1084

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of Structure Evolution during Hot Working of AA5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 22 Sep 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Reconstruction of δ-phase in superalloy by 3D EDXS in a DualBeam FIB

Wagner, J., Schaffer, B., Schröttner, H., Mitsche, S., Stotter, C. & Sommitsch, C., 2008, Table of Contents. ., p. 984-985

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Total scattering cross section of N2 and effective beam gas path length measurements

Rattenberger, J., Wagner, J., Schröttner, H., Mitsche, S., Schaffer, M. & Zankel, A., 2008, MicroScience. ., p. F1.1 P6-F1.1 P6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

δ-Phase characterization of superalloy allvac 718 PlusTM

Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS Annual Meeting. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2009

A Method to Measure the Total Scattering Cross Section and Effective Beam Gas Path Length in a Low-Vacuum SEM

Rattenberger, J., Wagner, J., Schröttner, H., Mitsche, S. & Zankel, A., 2009, In : Scanning. 31, p. 1-7

Research output: Contribution to journalArticleResearchpeer-review

Evolution of Microstructure and Properties for Friction Stir Welded Martensitic Precipitation-Hardening Steels

Weinberger, T., Führer, B., Khosa, S. U., Enzinger, N., Cerjak, H-H., Schröttner, H. & Mitsche, S., 2009, Proceedings: 8th International Conference on Trends in Welding Research Conference. ., p. 398-402

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fast automated 3D EDXS Mapping

Wagner, J., Mitsche, S., Letofsky-Papst, I., Schröttner, H. & Sommitsch, C., 30 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fast automated 3D EDXS Mapping

Wagner, J., Mitsche, S., Letofsky-Papst, I., Schröttner, H. & Sommitsch, C., 2009, Instrumentation and Methodology. Wien: Facultas, p. 81-82

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Gefügecharakterisierung der Superlegierung Allvac 718 PlusTM mittels elektronenmikroskopischer Methoden

Mitsche, S., Huber, D., Wagner, J., Letofsky-Papst, I., Sommitsch, C. & Stockinger, M., 15 Apr 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Grain-subgrain structure analyses of hot deformed superalloy Allvac 718plusTM by EBSD

Mitsche, S., Sommitsch, C., Huber, D., Pölt, P. & Stockinger, M., 2009.

Research output: Contribution to conferencePosterResearch

Grain-subgrain structure analyses of hot deformed superalloy Allvac 718plusTM by EBSD

Mitsche, S., Sommitsch, C., Huber, D., Pölt, P. & Stockinger, M., 2009, Materials Science. Wien: Facultas, p. 257-258

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Physical based microstructure modelling coupled with nucleation theory during and after hot forming of AA5083

Sherstnev, P., Sommitsch, C., Mitsche, S. & Melzer, C., 25 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physically based microstructure modelling of AA6082 during hot extrusion

Krumphals, F., Sherstnev, P., Mitsche, S., Randjelovic, S. & Sommitsch, C., 2009, Proceeding International Conference on Extrusion and Benchmark. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Recrystallization and grain growth in the nickel-based superalloy Allvac 718Plus

Sommitsch, C., Huber, D., Ingelman-Sundberg, F., Mitsche, S., Stockinger, M. & Buchmayr, B., 2009, In : International journal of materials research = Zeitschrift für Metallkunde. 8, p. 1088-1098

Research output: Contribution to journalArticleResearchpeer-review

2010

Improved creep and oxidation behavior of a martensitic 9Cr steel by the controlled addition of boron and nitrogen

Mayr, P., Holzer, I., Mendez Martin, F., Albu, M., Mitsche, S., González, V. & Agüero, A., 2010, (Accepted/In press) Liège Conference on Materials for Advanced Power Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Nanoanalytical characterization of an organic photodiode by electron microscopy and atomic force microscopy

Fladischer, S., Neuhold, A. G., Mitsche, S., Kraker, E., Haase, A., Lamprecht, B., Resel, R. & Grogger, W., 2010.

Research output: Contribution to conferencePosterResearch

Nanoanalytical characterization of organic devices by electron microscopy & atomic force

Fladischer, S., Mitsche, S., Neuhold, A. G., Kraker, E., Haase, A., Lamprecht, B., Resel, R. & Grogger, W., 2010.

Research output: Contribution to conferencePosterResearch

Nanoanalytical characterization of organic photodiode by electron microscopy and atomic force microscopy

Fladischer, S., Neuhold, A., Mitsche, S., Matsko, N., Kraker, E., Haase, A., Lamprecht, B., Resel, R. & Grogger, W., 2010, International Conference on Organic Electronics. ., p. 235-236

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Organic Heterostructure Photodiodes – Thin Film Morphologies and Crystal Structures of the Organic Layers

Neuhold, A., Fladischer, S., Mitsche, S., Moser, A., Flesch, H-G., Novak, J., Kraker, E., Haase, A., Smilgies, D. M., Grogger, W. & Resel, R., 2010.

Research output: Contribution to conferencePosterResearch