Stefan Mitsche

Oberrat Dipl.-Ing. Dr.techn.

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2003 2019

2019

Biotransformation of Scheelite CaWO4 by the Extreme Thermoacidophile Metallosphaera sedula: Tungsten–Microbial Interface

Blazevic, A., Albu, M., Mitsche, S., Rittmann, S., Habler, G. & Milojevic, T., 2 Jul 2019, In : Frontiers in Microbiology . 10, 11 p., 1492.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Broad Ion Beam Cross Section Preparation on Nitrocarburisedand Oxidised Steel Samples to Correlate Microstructure andTribological Behaviour

Rattenberger, J., Mitsche, S., Fitzek, H. M., Velkavrh, I., Diem, A. & Schröttner, H., 2019, Proceedings-14th Multinational Congress on Microscopy, Belgrad-Serbia, Sept. 15-20 2019. p. 37-38

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Preparation Method of Spherical and Monocrystalline Aluminum Powder

Skalon, M., Hebda, M., Buzolin, R., Pottlacher, G., Mitsche, S. & Sommitsch, C., 23 Mar 2019, In : Metals. 9, 3, 9 p., 375.

Research output: Contribution to journalArticleResearchpeer-review

Recrystallized cube grains in an Al–Mg–Si alloy dependent on prior cold rolling

Falkinger, G., Regl, K. & Mitsche, S., 12 May 2019, In : Materials science and technology. 7 p.

Research output: Contribution to journalArticleResearchpeer-review

2018

Intermetallic Compound and Void Kinetics Extraction From Resistance Evolution in Copper Pillars During Electromigration Stress Tests

Hartler, C., Moreau, S., Chery, E., Charbonnier, J., Siegert, J., Plihon, A., Assous, M., Mitsche, S., Simic, S., Schrank, F. & Grogger, W., 2018, In : IEEE Transactions on Device and Materials Reliability. 18, 2, p. 313-320 17822358.

Research output: Contribution to journalArticleResearch

Microstructure evolution in a 6082 aluminium alloy during thermomechanical treatment

Poletti, C., Bureau, R., Loidolt, P., Simon, P., Mitsche, S. & Spuller, M., 30 Jul 2018, In : Materials. 11, 8, 1319.

Research output: Contribution to journalArticleResearchpeer-review

Thermomechanical treatment
Aluminum alloys
Microstructure
Optical microscopy
Recovery
2017

In situ EBSD Investigations of Al-Mg-Si-Alloy during heating

Mitsche, S., Grasserbauer, J. & Pölt, P., 2017, 13th Multinational Congress on Microscopy September 24-29, 2017 in Rovinj, Croatia. p. 106-108

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

In situ EBSD Investigations of Al-Mg-Si-Alloy during heating

Mitsche, S., Grasserbauer, J. & Pölt, P., 2017.

Research output: Contribution to conferencePosterResearch

Investigation of domains in Pr2NiO4+delta by transmission electron microscopy

Gspan, C., Bucher, E., Egger, A., Schrödl, N., Dienstleder, M., Mitsche, S., Sitte, W. & Grogger, W., 27 Sep 2017, p. 60.

Research output: Contribution to conferencePosterResearch

Investigation of domains in Pr2NiO4+delta by transmission electron microscopy

Gspan, C., Bucher, E., Egger, A., Schrödl, N., Berger, C., Dienstleder, M., Mitsche, S., Sitte, W. & Grogger, W., 2017, 13th Multinational Congress on Microscopy September 24-29, 2017 in Rovinj, Croatia. p. 622-625

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2016

Dissimilar electron beam welds of nickel base alloy A625 with a 9% Cr-steel for high temperature applications

Wiednig, C. A., Plesiutschnig, E., Mitsche, S., Beal, C., Enzinger, N. & Lochbichler, C., 1 May 2016.

Research output: Contribution to conferencePosterResearch

Open Access
File

Dissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature Applications

Wiednig, C. A., Plesiutschnig, E., Mitsche, S., Beal, C., Enzinger, N. & Lochbichler, C., 2 Nov 2016, In : Materials Science Forum. 879, p. 2100-2106

Research output: Contribution to journalArticleResearchpeer-review

In Situ Phase Investigations of X20Cr13 High Cr Steel

Mitsche, S., Plesiutschnig, E. & Sommitsch, C., 2016.

Research output: Contribution to conferencePosterResearch

On the discrimination of semi-graphite and graphite by Raman spectroscopy

Rantitsch, G., Lämmerer, W., Fisslthaler, E., Mitsche, S. & Kaltenböck, H., 2016, In : International Journal of Coal Geology. 159, p. 48-56 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Unified description of the softening behavior of beta-metastable and alpha+beta titanium alloys during hot deformation

Poletti, M. C., Germain, L., Warchomicka, F. G., Dikovits, M. & Mitsche, S., 2016, In : Materials science and engineering / A. 651, p. 280-290

Research output: Contribution to journalArticleResearchpeer-review

2015

High spatial and energy resolution x-ray analysis of thin specimens by scanning electron microscopy

Mitsche, S., Melischnig, A., Haberfehlner, G., Dienstleder, M. & Pölt, P., 3 May 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

High spatial and energy resolution x-ray analysis of thin specimens by scanning electron microscopy

Mitsche, S., Haberfehlner, G., Dienstleder, M. & Pölt, P., 2015, Modern development and applications in microbeam analysis. ., p. 373-373

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Advanced Microstructures for Increased Creep Rupture Strength of MARBN Steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G., Mitsche, S. & Sommitsch, C., 2014, In : Materials Science Forum. 783-786, p. 1867-1871

Research output: Contribution to journalArticleResearchpeer-review

Combined EDS and WDS analysis of thin specimens with high spatial and energy resolution in the scanning electron microscope

Mitsche, S. & Pölt, P., 2014, Microscopy for Global Challenges. ., p. IT-4-P3166

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of the 3D Calcium and Aluminium distribution in standard and ECO-Mg alloys

Wagner, J., Schröttner, H., Rattenberger, J., Mitsche, S. & Panzirsch, B., 2014.

Research output: Contribution to conferencePosterResearch

Comparison of the 3D Calcium and Aluminium distribution in standard and ECO-Mg alloys

Wagner, J., Schröttner, H., Rattenberger, J., Mitsche, S. & Panzirsch, B., 2014, p. MS-4-P-3413.

Research output: Contribution to conferenceAbstractResearchpeer-review

In situ mechanical compression of polycrystalline BaTiO3 in the ESEM

Reichmann, A., Mitsche, S., Zankel, A., Pölt, P. & Reichmann, K., 2014, In : Journal of the European Ceramic Society. 34, p. 2211-2215

Research output: Contribution to journalArticleResearchpeer-review

Investigation of the domain switching in the bulk and on the surface of BaTiO3

Reichmann, A., Mitsche, S., Zankel, A., Pölt, P. & Reichmann, K., 2014.

Research output: Contribution to conferencePosterResearch

Investigations into the delayed fracture susceptibility of 34CrNiMo6 steel, and the opportunities for its application in ultra-high-strength bolts and fasteners

Kuduzovic, A., Poletti, M. C., Sommitsch, C., Domankova, M., Mitsche, S. & Kienreich, R., 2014, In : Materials science and engineering / A. 590, p. 66-73

Research output: Contribution to journalArticleResearchpeer-review

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014.

Research output: Contribution to conferencePosterResearch

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014, Materials for Advanced Power Engineering 2014. Jülich: ., Vol. 234. p. 180-187 (Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Multi-Scale-Analysis of Modern Aluminium-Alloys

Schröttner, H., Panzirsch, B., Albu, M., Mitsche, S., Mertschnigg, S., Gspan, C., Rattenberger, J., Wagner, J. & Hofer, F., 2014, p. MS-4-P-2525.

Research output: Contribution to conferenceAbstractResearchpeer-review

Multi-Scale-Analysis of Modern Aluminium-Alloys

Schröttner, H., Panzirsch, B., Albu, M., Mitsche, S., Gspan, C., Rattenberger, J., Wagner, J. & Hofer, F., 2014.

Research output: Contribution to conferencePosterResearch

2013

Advanced microstructures for increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Mitsche, S., Paul, S. & Zeiler, G., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Analysis based on WDS: applications, problems, solutions

Pölt, P. & Mitsche, S., 4 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characterization of Ni-nanostructures in porous silicon by SEM and TEM - more problems than results

Pölt, P., Granitzer, P., Rumpf, K., Jantscher, K., Albu, M. & Mitsche, S., 2013.

Research output: Contribution to conferencePosterResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Enzinger, N., Mitsche, S. & Sommitsch, C., 2013, In : Welding in the world. 57, 6, p. 895-902

Research output: Contribution to journalArticleResearchpeer-review

Geopolymerization of coal fly ash in the presence of electric arc furnace dust

Nikolic, I., Crossed, D. S., Belcic, D., Zejak, R., Karanovic, L., Mitsche, S. & Radmilovic, V., 2013, In : Minerals engineering. 49, p. 24-32

Research output: Contribution to journalArticleResearchpeer-review

Hot deformation studies of a creep resistant Mg alloy

Dikovits, M., Poletti, M. C., Dieringa, H. & Mitsche, S., 3 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Hot deformation studies of creep resistant Mg alloy

Dikovits, M., Poletti, M. C., Dieringa, H. & Mitsche, S., 2013, Magnesium; Aluminium; Titanium Science and Technology. ., p. 100-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

In situ mechanical polarization of polycristalline BaTiO3 in the ESEM with subsequent EBSD investigations

Reichmann, A., Reichmann, K., Mitsche, S., Zankel, A. & Pölt, P., 2013, Instrumentation and Methods; Materials Science. ., p. 377-378

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations on susceptibility to intergranular corrosion of thermo-mechanically rolled corrosion-resistant materials 316L and Alloy 825

Prohaska, M., Mori, G., Grill, R., Tischler, G. & Mitsche, S., 2013, In : Materials and corrosion. 64, 4, p. 290-299

Research output: Contribution to journalArticleResearchpeer-review

Microstructural evolution of AA6082 with small aluminides under hot torsion and friction stir processing

Poletti, M. C., Krumphals, F., Mitsche, S. & Gao, Z., 2013, In : Materials Science Forum. 753, p. 263-266

Research output: Contribution to journalArticleResearchpeer-review

Microstructural evolution of AA6082 with small aluminides under hot torsion and friction stir processing

Poletti, M. C., Krumphals, F., Gao, Z., Enzinger, N. & Mitsche, S., 15 Apr 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File
2012

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Mitsche, S., Enzinger, N. & Sommitsch, C., 8 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Grain Boundaries: Still Active in Electronic Ceramics

Reichmann, K., Kirstein, K. & Mitsche, S., 17 May 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of temperature and strain rate on dynamic softening processes in AllvacR 718PlusTM

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2012, In : Materials Science Forum. 706-709, p. 2440-2445

Research output: Contribution to journalArticleResearchpeer-review

Investigation of friction stir welding of stainless steel using a stop-action-technique

Pfeiffer, C., Weinberger, T., Schröttner, H., Mitsche, S. & Enzinger, N., 2012, In : Advanced Materials Research. 409, p. 293-298

Research output: Contribution to journalArticleResearchpeer-review

INVESTIGATION OF MICRO-CRACK PROPAGATION IN THE NICKEL BASED ALLOY 80A DURING HOT FORMING BY 3D-EBSD

Mitsche, S., Jantscher, K., Sommitsch, C. & Pölt, P., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File