20122024
If you made any changes in Pure these will be visible here soon.

Research Output 2012 2019

  • 17 Article
  • 9 Conference contribution
  • 3 Poster
  • 1 Conference article
2019

A continuous dynamic recrystallization model to describe the hot deformation behaviour of a Ti5553 alloy

Buzolin, R. H., Krumphals, F., Lasnik, M., Krumphals, A. & Poletti, M. C., 14 Aug 2019, In : Journal of Physics: Conference Series. 1270, 1, 012048.

Research output: Contribution to journalConference articleResearchpeer-review

Open Access
microstructure
strain rate
grain boundaries
titanium alloys
recovery

Article Improving the Dimensional Stability and Mechanical Properties of AISI 316L + B Sinters by Si3N4 Addition

Skalon, M., Buzolin, R. H., Kazior, J., Sommitsch, C. & Hebda, M., 3 Jun 2019, In : Materials. 12, 11, 15 p., 1798.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Boron
Dimensional stability
Silicon nitride
Mechanical properties
Eutectics

CORROSION BEHAVIOUR OF SLM 316L FOR DIFFERENT BUILD DIRECTIONS AND SURFACE CONDITIONS

Bevli, L., Höller, C., Buzolin, R. H., Vallant, R. & Sommitsch, C., 2019, Proceedings of the European Stainless Steel Conference & DUPLEX 2019 . p. 312-327

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure development of molybdenum during rotary friction welding

Stütz, M., Buzolin, R. H., Pixner, F., Poletti, M. C. & Enzinger, N., 2019, In : Materials characterization. 151, p. 506-518 13 p.

Research output: Contribution to journalArticleResearchpeer-review

friction welding
Friction welding
Molybdenum
molybdenum
Welding

Preparation Method of Spherical and Monocrystalline Aluminum Powder

Skalon, M., Hebda, M., Buzolin, R., Pottlacher, G., Mitsche, S. & Sommitsch, C., 23 Mar 2019, In : Metals. 9, 3, 9 p., 375.

Research output: Contribution to journalArticleResearchpeer-review

2018

Characterization of localized corrosion of heat treated Er- and Zr-containing A356 alloys in 3.5 wt% NaCl aqueous solution

Colombo, M., Buzolin, R. H., Gariboldi, E., Vallant, R. & Sommitsch, C., 7 Jun 2018, In : Materials and corrosion. p. 1-13

Research output: Contribution to journalArticleResearchpeer-review

Corrosion
Intermetallics
Corrosion resistance
Potentiodynamic polarization
Electrochemical impedance spectroscopy

Corrosion behaviour of as-cast ZK40 with CaO and Y additions

BUZOLIN, R. H., MOHEDANO, M., MENDIS, C. L., MINGO, B., TOLNAI, D., BLAWERT, C., KAINER, K. U., PINTO, H. & HORT, N., 1 Mar 2018, In : Transactions of Nonferrous Metals Society of China / English Edition. 28, 3, p. 427-439 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Intermetallics
intermetallics
casts
corrosion
Corrosion

Intermetallic phase characteristics in the Mg–Nd–Zn system

Tolnai, D., Hill, S. A., Gavras, S., Subroto, T., Buzolin, R. & Hort, N., 1 Jan 2018, Magnesium Technology 2018. Springer International Publishing AG , p. 391-397 7 p. (Minerals, Metals and Materials Series; vol. Part F7).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Intermetallics
Diffraction
Neodymium
Creep resistance
Ternary systems

Microstructure evolution of ti-5al-5v-5mo-3cr after hot deformation at large and moderate strains

Poletti, M. C., Buzolin, R., Kumar, S., Wang, P. & Simonet-Fotso, T. F. J., 1 Jan 2018, THERMEC 2018. Shabadi, R., Chandra, T., Jeandin, M., Ionescu, M. & Richard, C. (eds.). Trans Tech Publications Ltd., p. 1443-1449 7 p. (Materials Science Forum; vol. 941 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hot working
microstructure
Microstructure
Dynamic recrystallization
Microstructural evolution

Modelling the hot deformation behaviour of a Ti5553 alloy

Buzolin, R. H., Krumphals, F., Krumphals, A., Lasnik, M., Wang, P., Kumar, S. & Poletti, M. C., 2018.

Research output: Contribution to conferencePosterResearch

Phase formation during solidification of Mg-Nd-Zn alloys: An in situ synchrotron radiation diffraction study

Tolnai, D., Subroto, T., Gavras, S., Buzolin, R., Stark, A., Schell, N. & Hort, N., 6 Sep 2018, In : Materials. 11, 9, 1637.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Synchrotron radiation
Solidification
Diffraction
Rare earths
Thermodynamics

The effect of Zn content on the mechanical properties of Mg-4Nd-xZn Alloys (x = 0, 3, 5 and 8 wt.%)

Gavras, S., Buzolin, R. H., Subroto, T., Stark, A. & Tolnai, D., 28 Jun 2018, In : Materials. 11, 7, 12 p., 1103.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Intermetallics
Mechanical properties
Grain boundaries
Compression testing
Yield stress

The Role of Zn Additions on the Microstructure and Mechanical Properties of Mg–Nd–Zn Alloys

Gavras, S., Subroto, T., Buzolin, R. H., Hort, N. & Tolnai, D., 1 Jul 2018, In : International Journal of Metalcasting. 12, 3, p. 428-433 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Mechanical properties
Microstructure
Intermetallics
Compaction
Rare earth alloys

Ungleiches WIG-Schweißen zwischen hochfesten, niedrig legierten Stählen und austenitischen TRIP-Manganhartstählen

Buzolin, R. H., Rodrigues, J. A., Pereira Da Silva, E., Cavalcanti Pinto, H. & Maluf, O., 1 May 2018, In : Praktische Metallographie/Practical Metallography. 55, 5, p. 288-302 15 p.

Research output: Contribution to journalArticleResearchpeer-review

gas tungsten arc welding
high strength steels
Steel
High strength steel
Welding

Zum Einfluss des Lösungsglühens und Aushärtens auf die Mikrostruktur von ZK40-Legierungen, modifiziert durch Zugaben von Ca, Gd, Nd und Y

Buzolin, R. H., Mendis, C. L., Tolnai, D., Kainer, K. U., Hort, N., Pereira Da Silva, E. & Cavalcanti Pinto, H., 1 May 2018, In : Praktische Metallographie/Practical Metallography. 55, 5, p. 268-287 20 p.

Research output: Contribution to journalArticleResearchpeer-review

Precipitates
precipitates
Aging of materials
Intermetallics
intermetallics
2017

As cast microstructures on the mechanical and corrosion behaviour of ZK40 modified with Gd and Nd additions

Buzolin, R. H., Mohedano, M., Mendis, C. L., Mingo, B., Tolnai, D., Blawert, C., Kainer, K. U., Pinto, H. & Hort, N., 13 Jan 2017, In : Materials Science and Engineering A. 682, p. 238-247 10 p.

Research output: Contribution to journalArticleResearchpeer-review

casts
corrosion
Corrosion
Scanning
Mechanical properties

Corrosion and creep resistance of Thixomolded® magnesium alloys

Buzolin, R., Dieringa, H., Blawert, C., Frank, H., Mendis, C. L., Lohmüller, A., Kainer, K. U. & Hort, N., 1 Jan 2017, Magnesium Technology 2017. Springer International Publishing AG , p. 381-389 9 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep resistance
Magnesium alloys
Corrosion resistance
Corrosion
Processing

Dissimilar friction stir welding of HSLA steel to austenitic high-Mn TRIP steel

Buzolin, R. H., Francisco, B. R., Da Silva, E. P., Pereira, V. F., Londono, A. J. R., Maluf, O. & Pinto, H. C., 1 Jan 2017, THERMEC 2016. Trans Tech Publications Ltd., p. 2306-2311 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

friction stir welding
Friction stir welding
Steel
steels
butt joints

Effect of mischmetal additions and solution heat treatments (T4) on the microstructure and mechanical properties of thixocast ZK60-RE magnesium alloys

da Silva, E. P., Buzolin, R. H., Callegari, B., Warchomicka, F., Requena, G. C. & Pinto, H. C., 1 Jan 2017, THERMEC 2016. Trans Tech Publications Ltd., p. 2300-2305 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

mischmetal
Rare earth alloys
rare earth alloys
magnesium alloys
Magnesium alloys

Effect of the Zn content on the compression behaviour of Mg5Nd(Zn): An in situ synchrotron radiation diffraction study

Tolnai, D., Kärcher, T., Buzolin, R., Subroto, T., D’Elia, F., Gavras, S., Stark, A., Schell, N., Hort, N. & Kainer, K. U., 1 Jan 2017, Magnesium Technology 2017. Springer International Publishing AG , p. 675-681 7 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Synchrotron radiation
Diffraction
Twinning
Rare Earth Metals
Metallography

Microstructure and residual stresses in a friction stir welded butt joint of as-cast ZK60 alloy containing rare earths

Da Silva, E. P., Oliveira, V. B., Pereira, V. F., Maluf, O., Buzolin, R. H. & Pinto, H. C., 1 May 2017, In : Materials research. 20, 3, p. 775-779 5 p.

Research output: Contribution to journalArticleResearchpeer-review

butt joints
friction stir welding
Friction stir welding
cast alloys
Rare earths

Ultrasound assisted casting of an AM60 based metal matrix nanocomposite, its properties, and recyclability

Dieringa, H., Katsarou, L., Buzolin, R., Szakács, G., Horstmann, M., Wolff, M., Mendis, C., Vorozhtsov, S. & StJohn, D., 1 Oct 2017, In : Metals. 7, 10, 388.

Research output: Contribution to journalArticleResearchpeer-review

Remelting
Nanocomposites
Casting
Nucleation
Ultrasonics
2016

Corrosion behavior of ZK40 alloys modified with Gd, Nd, Y or CaO using potentiodynamic polarization curves and SKPFM

Buzolin, R. H., MOHEDANO, M., Mendis, C. L., MINGO, B., BLAWERT, C., Tolnai, D., Pinto, H. C., Kainer, K. U. & Hort, N., 8 Jun 2016.

Research output: Contribution to conferencePosterResearch

Development and application of a homemade procedure for manufacturing of mechanical spare parts

Oliveira, V. B., Cardoso, C. G. L., Aliaga, L. C. R., Buzolin, R. H. & Da Costa Viana, C. S., 1 Oct 2016, In : Journal of Materials Research and Technology. 5, 4, p. 360-366 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Steel
Wire
Costs
Machinery
Availability

In situ synchrotron radiation diffraction investigation of the compression behaviour at 350 °C of ZK40 alloys with addition of CaO and Y

Buzolin, R. H., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Pinto, H., Kainer, K. U. & Hort, N., 10 May 2016, In : Materials Science and Engineering A. 664, p. 2-9 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Synchrotron radiation
synchrotron radiation
Compaction
Diffraction
Dynamic recrystallization

The Role of Zn on the Elevated Temperature Compression Behavior of Mg5Nd: An In Situ Synchrotron Radiation Diffraction Study

Tolnai, D., Buzolin, R. H., D‘Elia, F., Subroto, T., Gavras, S., Stark, A., Schell, N., Kainer, K. U. & Hort, N., 1 Dec 2016, In : JOM, the journal of the Minerals, Metals & Materials Society. 68, 12, p. 3051-3056 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Synchrotron radiation
Diffraction
Ternary alloys
Twinning
Binary alloys
2015

In situ synchrotron radiation diffraction study of the role of Gd, Nd on the elevated temperature compression behavior of ZK40

Buzolin, R. H., Tolnai, D., Mendis, C. L., Stark, A., Schell, N., Pinto, H., Kainer, K. U. & Hort, N., 9 Jul 2015, In : Materials Science and Engineering A. 640, p. 129-136 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Synchrotron radiation
synchrotron radiation
Diffraction
Dynamic recrystallization
Twinning

Investigation of compression behavior of Mg-4Zn-2(Nd, Gd)-0.5Zr at 350°C by in situ synchrotron radiation diffraction

Buzolin, R. H., Tolnai, D., Mendis, C. L., Stark, A., Schell, N., Pinto, H., Kainer, K. U. & Hort, N., 1 Jan 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. The Minerals, Metals and Materials Society, Vol. 2015-January. p. 103-107 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Synchrotron radiation
Diffraction
Dynamic recrystallization
Twinning
Hot pressing
2012

EFFECT OF THE TOOL OFFSET ON THE FRICTION STIR WELDABILITY OF DISSIMILAR JOINTS BETWEEN HIGH-Mn TRIP AND HSLA STEEL GRADES

Francisco, B. R., Buzolin, R. H., Mendonça, R. R., Pereira, V. F., Da Silva, E. P., Lima, E. B., Londono, A. J. R. & Pinto, H. C., 2012, EFFECT OF THE TOOL OFFSET ON THE FRICTION STIR WELDABILITY OF DISSIMILAR JOINTS BETWEEN HIGH-Mn TRIP AND HSLA STEEL GRADES . p. 8731-8742 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Weldability
Friction
Welding
Steel
Austenitic steel