Reinhard Brandner

Assoc.Prof. Dipl.-Ing. (FH) Dr.techn.

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2005 2019

Filter
Article
2019

Block shear failure mechanism of axially-loaded groups of screws

Mahlknecht, U. & Brandner, R., 2019, In : Engineering Structures. 183, p. 220-242 23 p.

Research output: Contribution to journalArticleResearchpeer-review

Timber
Fibers
Fasteners
Stress concentration

Performance of axially-loaded self-tapping screws in hardwood: Properties and design

Brandner, R., Ringhofer, A. & Reichinger, T., 1 Jun 2019, In : Engineering Structures. 188, p. 677-699 23 p.

Research output: Contribution to journalArticleResearchpeer-review

Hardwoods
Timber
Loads (forces)
Bearings (structural)
Mechanical properties

Properties of axially loaded self-tapping screws with focus on application in hardwood

Brandner, R., 3 Sep 2019, In : Wood Material Science and Engineering. 14, 5, p. 254-268 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Hardwoods
Timber
Softwoods
Fasteners
Wood
2018

Application of European design principles to cross laminated timber

Fink, G., Kohler, J. & Brandner, R., Sep 2018, In : Engineering Structures. 171, p. 934-943

Research output: Contribution to journalArticleResearchpeer-review

Timber
Safety factor
Beams and girders
Reliability analysis
Materials properties

Cross laminated timber (CLT): Design approaches for dowel-type fasteners and connections

Ringhofer, A., Brandner, R. & Blaß, H. J., 2018, In : Engineering Structures. 171, p. 849-861

Research output: Contribution to journalArticleResearchpeer-review

Fasteners
Timber
Nails
Product design
Engineers
Timber
Compaction
Testing
Elastic moduli
Stiffness

Mechanical characterization of a pre-fabricated connection system for cross laminated timber structures in seismic regions

Polastri, A., Giongo, I., Angeli, A. & Brandner, R., 15 Jul 2018, In : Engineering Structures. 165, p. 705-715

Research output: Contribution to journalArticleResearchpeer-review

Timber
Earthquakes
Compaction

Rolling shear: Test configurations and properties of some European soft- and hardwood species

Ehrhart, T. & Brandner, R., 1 Oct 2018, In : Engineering Structures. 172, p. 554-572 19 p.

Research output: Contribution to journalArticleResearchpeer-review

Softwoods
Hardwoods
Timber
Ashes
Shear strength
2017

Cross laminated timber (CLT) diaphragms under shear: Test configuration, properties and design

Brandner, R., Dietsch, P., Dröscher, J., Schulte-Wrede, M., Kreuzinger, H. & Sieder, M., 2017, In : Construction & building materials. 147, p. 312-327

Research output: Contribution to journalArticleResearchpeer-review

Probabilistic models for the withdrawal behavior of single self-tapping screws in the narrow face of cross laminated timber (CLT)

Brandner, R., Ringhofer, A. & Grabner, M., 2017, In : European Journal of Wood and Wood Products. 76, 1, p. 13-30 18 p.

Research output: Contribution to journalArticleResearchpeer-review

probabilistic models
Timber
screws
timber
wood technology
2016

Cross laminated timber (CLT): overview and development

Brandner, R., Flatscher, G., Ringhofer, A., Schickhofer, G. & Thiel, A., Mar 2016, In : European Journal of Wood and Wood Products. 74, 3

Research output: Contribution to journalArticleResearchpeer-review

Der Einsatz des Götterbaums im Baubereich

Brandner, R. & Müller, U., Mar 2016, Holzbau Austria, p. 54-57.

Research output: Contribution to specialist publicationArticleResearch

Samples of iid Lognormals: approximations for characteristics of minima

Brandner, R. & Stadlober, E., 2016, In : Communications in statistics / Simulation and computation. 45, p. 1-15

Research output: Contribution to journalArticleResearchpeer-review

Shear properties of cross laminated timber (CLT) under in-plane load: test configuration and experimental study

Brandner, R., Dietsch, P., Dröscher, J., Schulte-Wrede, M., Kreuzinger, H., Sieder, M., Schickhofer, G. & Winter, S., 2016, In : New Zealand Timber Design Journal. 24, 3, p. 14-27

Research output: Contribution to journalArticleResearchpeer-review

2015

Axial beanspruchte Holzschrauben in Vollholz, Brettschichtholz und Brettsperrholz

Ringhofer, A., Brandner, R., Flatscher, G. & Schickhofer, G., 2015, In : Bautechnik. 92, 11, p. 770-782

Research output: Contribution to journalArticleResearchpeer-review

Probabilistic models for the modulus of elasticity and shear in serial and parallel acting timber elements

Brandner, R. & Schickhofer, G., 2015, In : Wood Science and Technology. 49, p. 121-146

Research output: Contribution to journalArticleResearchpeer-review

Scheibenschub von Brettsperrholz: Verifizierung einer Prüfkonfiguration und Parameterstudie

Brandner, R., Dietsch, P., Dröscher, J., Schulte-Wrede, M. & Sieder, M., 2015, In : Bautechnik. 99, 11, p. 759-769

Research output: Contribution to journalArticleResearchpeer-review

Schubkenngrößen von BSP bei Beanspruchung als Scheibe

Brandner, R., Dietsch, P., Dröscher, J. & Schulte-Wrede, M., 2015, In : BSP | Special. p. 38-38

Research output: Contribution to journalArticleResearch

Self-tapping screws and threaded rods as reinforcement for structural timber elements - A state-of-the-art report

Dietsch, P. & Brandner, R., 2015, In : Construction & building materials. 97, p. 78-89

Research output: Contribution to journalArticleResearchpeer-review

Withdrawal resistance of self-tapping screws in unidirectional and orthogonal layered timber products

Ringhofer, A., Brandner, R. & Schickhofer, G., 2015, In : Materials and structures. 48, 5, p. 1435-1447

Research output: Contribution to journalArticleResearchpeer-review

2014

Entwicklung einer optimierten Schraubengeometrie für hochbeanspruchte Stahl-Holz-Verbindungen

Ringhofer, A., Brandner, R. & Schickhofer, G., 2014, In : Bautechnik. 91, 1, p. 31-37

Research output: Contribution to journalArticleResearchpeer-review

Optimales Fügen von BSP: Möglichkeiten von Schraubenverbindungen untersucht

Brandner, R., Bratulic, K., Flatscher, G., Grabner, M. & Ringhofer, A., 2014, In : BSP | Special. p. 28-28

Research output: Contribution to journalArticleResearch

Spatial correlation of tensile perpendicular to grain properties in Norway spruce timber

Brandner, R. & Schickhofer, G., 2014, In : Wood Science and Technology. 48, 2, p. 337-352

Research output: Contribution to journalArticleResearchpeer-review

2013

Probabilistic characterisation of the length effect for parallel to the grain tensile strength of Central European spruce

Kohler, J., Brandner, R., Thiel, A. & Schickhofer, G., 2013, In : Engineering Structures. 56, p. 691-697

Research output: Contribution to journalArticleResearchpeer-review

The mechanical potential of the Tree-of-Heaven (Ailanthus altissima)

Brandner, R. & Schickhofer, G., 2013, In : Holztechnologie. 54, 5, p. 5-11

Research output: Contribution to journalArticleResearch

2012

Einfluss des beanspruchten Volumens auf die Schubfestigkeit von Vollholz

Brandner, R., 2012, hbf-newsletter, 1/2012.

Research output: Contribution to specialist publicationArticleResearchpeer-review

2011

MMSM 2.2.1 stoch_mod: Stoch. Betrachtung des Längeneffektes bzw. der Festigkeit als Funktion der Länge II zur Faser

Brandner, R., 2011, hbf news_letter 01/10, 01/10.

Research output: Contribution to specialist publicationArticleResearch

2009

APTM 2.1.1 mature_wood

Brandner, R., 2009, hbf news_letter 01/09, 01/09.

Research output: Contribution to specialist publicationArticleResearch

B_S_H-Normung

Brandner, R. & Schickhofer, G., 2009, hbf news_letter 01/09, 01/09.

Research output: Contribution to specialist publicationArticleResearch

FFG-Projekt "Götterbaum - Ailanthus altissima 臭 椿"

Brandner, R., 2009, hbf news_letter 02/08, 02/08.

Research output: Contribution to specialist publicationArticleResearch

FFG-Projekt "Hochleistungsfähiges mini:BSH aus Tanne / Lärche"

Brandner, R., 2009, hbf news_letter 02/08, 02/08.

Research output: Contribution to specialist publicationArticleResearch

MMSM 2.2.1 stoch_mod

Brandner, R., 2009, hbf news_letter 01/09, 01/09.

Research output: Contribution to specialist publicationArticleResearch

2008

COMET-Projekt 2.1.1 mature wood

Brandner, R., 2008, hbf news_letter 01/08, 01/08.

Research output: Contribution to specialist publicationArticleResearch

Glued laminated timber in bending: new aspects concerning modelling

Brandner, R. & Schickhofer, G., 2008, In : Wood Science and Technology. 42, 5, p. 401-425

Research output: Contribution to journalArticleResearchpeer-review

Non-K-Ind FFG-Projekt "Götterbaum - Ailanthus altissima 臭 椿"

Brandner, R. & Madl, L., 2008, hbf news_letter 01/08, 01/08.

Research output: Contribution to specialist publicationArticleResearch

2007

Götterbaum – Ailanthus altissima: Abklärung mech. Kenngrößen

Brandner, R., 2007, newsletter 01/07, 01/07.

Research output: Contribution to specialist publicationArticleResearch

IFP_2.3 Starkholz – Nutzung des Leistungspotenzials von Starkholz für Systemstrukturen im Ingenieurholzbau - Initialprojekt

Brandner, R. & Schickhofer, G., 2007, newsletter 02/07, 02/07.

Research output: Contribution to specialist publicationArticleResearch