Reinhard Brandner

Assoc.Prof. Dipl.-Ing. (FH) Dr.techn.

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2005 2019

Filter
Conference contribution
2018

Rolling shear in cross laminated timber (CLT): Experimental study of different wood species and important parameters for strength and stiffness

Ehrhart, T. & Brandner, R., 2018, Eastern European Conference on Timber Constructions (EECTC).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2017

Design approaches for dowel-type connections in CLT structures and their verification

Ringhofer, A., Brandner, R. & Blaß, H. J., 13 Sep 2017, International Conference on Connections in Timber Engineering - From Research to Standards: Proceeding of the Conference of COST Action FP1402. Brandner, R., Ringhofer, A. & Dietsch, P. (eds.). p. 80-111

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Basis of design principles – application to CLT

Köhler, J., Fink, G. & Brandner, R., 2016, Cross Laminated Timber – A competitive wood product for visionary and fire safe buildings: Proceedings of the Joint Conference of COST Actions FP1402 & FP1404. Falk, A., Dietsch, P. & Schmid, J. (eds.). KTH Royal Institute of Technology, School of Architecture and the Built Environment, Department of Civil and Architectural Engineering Division of Building Materials, SE-100 44 Stockholm, p. 45-63

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Block shear fialure mode of axially loaded groups of screws

Mahlknecht, U., Brandner, R. & Augustin, M., 23 Aug 2016, World Conference on Timber Engineering 2016, Vienna.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Fasteners
Failure modes
Lead screws
Fibers
Stiffness

Experimental analysis of a new connection system for CLT structures

Polastri, A., Brandner, R. & Casagrande, D., 2016, Structures and Architecture - Proceedings of the 3rd International Conference on Structures and Architecture. p. 119-127 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Group action of axially-loaded screws in the narrow face of cross laminated timber

Brandner, R., 2016, Proceedings of the World Conference on Timber Engineering (WCTE 2016). TU-Verlag, Technische Universität Wien, 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Introduction to CLT, Product Properties, Strength Classes

Schickhofer, G., Brandner, R. & Bauer, H., Mar 2016, Cross laminated Timber – a competitive wood product for visionary and fire safe buildings: Joint Conference of COST Actions FP1402 and FP1404.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

ULS Design of CLT Elements – Basics and some Special Topics

Thiel, A. & Brandner, R., Mar 2016, Joint Conference of COST Actions FP1402 and FP1404 Cross Laminated Timber – a competitive wood product for visionary and fire safe buildings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

A Universal Approach for Withdrawal Properties of Self-Tapping Screws in Solid Timber and Laminated Timber Products

Ringhofer, A., Brandner, R. & Schickhofer, G., 2015, International Network on Timber Engineering Research. Karlsruhe: ., p. 79-98

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Rolling Shear Properties of some European Timber Species with Focus on Cross Laminated Timber (CLT): Test Configuration and Parameter Study

Ehrhart, T., Brandner, R., Schickhofer, G. & Frangi, A., 2015, International Network on Timber Engineering Research (INTER), Meeting 48; ISSN 2199-9740. Karslruhe, Germany: Timber Scientific Publishing, p. 61-76

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Serial Correlation of Withdrawal Properties from Axially-Loaded Self-Tapping Screws

Brandner, R., Bratulic, K. & Ringhofer, A., 2015, (Accepted/In press) Proceedings of the 12th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP12). .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Shear Properties of Cross Laminated Timber (CLT) under in‐plane load: Test Configuration and Experimental Study

Brandner, R., Dietsch, P., Dröscher, J., Schulte-Wrede, M., Kreuzinger, H., Sieder, M., Schickhofer, G. & Winter, S., 2015, International Network on Timber Engineering Research (INTER), Meeting 48; ISSN 2199-9740. Karslruhe, Germany: Timber Scientific Publishing, p. 181-201

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Die Ausziehfestigkeit selbstbohrender Holzschrauben in geschichteten Holzprodukten

Ringhofer, A., Brandner, R., Grabner, M. & Schickhofer, G., 2014, Holzbau Forschung + Praxis. ., p. 49-60

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Gedanken zur und Erkenntnisse aus der Materialstruktur Holz

Brandner, R., 2014, Bionische Tragstrukturen im Holzbau. Graz: Verlag der Technischen Universität Graz, p. A-01-A-31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Joining of CLT Elements - Latest Findings in Graz

Bratulic, K. & Brandner, R., 2014, (Accepted/In press) International professional workshop on Wood Structures. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Monotonic and cyclic behaviour of joints with self-tapping screws in CLT structures

Bratulic, K., Flatscher, G. & Brandner, R., 2014, COST Action FP1004 Experimental Research with Timber. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Properties of Cross Laminated Timber (CLT) in Compression Perpendicular to Grain

Brandner, R. & Schickhofer, G., 2014, (Accepted/In press) International Network on Timber Engineering Research. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Untersuchungen zum Tragverhalten von axial beanspruchten Schraubengruppen in der Schmalseite von Brettsperrholz (BSP)

Plüss, Y. & Brandner, R., 2014, Internationales Holzbau-Forum (IHF 2014): Aus der Praxis - Für die Praxis, Band I, 3. Dez. 2014. Biel: ., p. 1-15

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

In plane Shear Strength of Cross Laminated Timber (CLT): Test Configuration, Quantification and influencing Parameters

Brandner, R., Bogensperger, T. & Schickhofer, G., 2013, (Accepted/In press) INTERNATIONAL COUNCIL FOR RESEARCH AND INNOVATION IN BUILDING AND CONSTRUCTION WORKING COMMISSION W18 - TIMBER STRUCTURES CIB-W18. Karslruhe, Germany: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Production and Technology of Cross Laminated Timber (CLT): A state-of-the-art Report

Brandner, R., 2013, Focus Solid Timber Solutions - European Conference on Cross Laminated Timber (CLT). Bath: University of Bath, p. 3-36

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2012

Determination of Shear Stength of Structural and Glued Laminated Timber

Brandner, R., Gatternig, W. & Schickhofer, G., 2012, (Accepted/In press) International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures, Meeting. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Einfluss der Anzahl und Orientierung der Schichten auf das Ausziehtragverhalten selbstbohrender Holzschrauben in Brettsperrholz

Ringhofer, A. & Brandner, R., 2012, Aus der Praxis - Für die Praxis. ., p. 1-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2011

Alterung und (Rest)Tragfähigkeit von Bauholz

Schickhofer, G. & Brandner, R., 2011, Alterung und (Rest)Tragfähigkeit von Bauholz. Graz: Verlag der Technischen Universität Graz, p. H-1-H-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Glued laminated timber in bending: thoughts, experiments, models and verification

Brandner, R. & Schickhofer, G., 2010, WCTE 2010 Conference Proceedings. ., p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Potential of Short Knot-Free Board Sections for Glued Laminated Timber Production

Kastner, E., Brandner, R. & Schickhofer, G., 2010, WCTE 2010 Conference Proceedings. ., p. 2-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Stochastische Betrachtung von Systemstrukturen - Statusbericht

Brandner, R. & Schickhofer, G., 2010, Forschungskolloquium Holzbau "Forschung und Praxis". Stuttgart: ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Tree-of-Heaven (Ailanthus altissima): enormous and wide potential neglected by the western civilisation

Brandner, R. & Schickhofer, G., 2010, WCTE 2010 Conference Proceedings. ., Vol. 2. p. 1576-1582

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Tree-of-Heaven (Ailanthus altissima): renewable resource with high potential for present and future

Brandner, R. & Schickhofer, G., 2010, Hardwood Science and Technology. Sopron: University of West Hungary Press, p. 222-234

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2009

Systemwirken im Tragverhalten von Holzwerkstoffen

Brandner, R. & Schickhofer, G., 2009, Fortbildungskurs der Schweizerischen Arbeitsgemeinschaft für Holzforschung. ., p. 31-51

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Determination of Shear Modulus by means of standardized four-point Bending Tests

Brandner, R., Freytag, B. & Schickhofer, G., 2008, CIB-W18. Karlsruhe: ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Modellbildung für DUO-, TRIO- und QUATTRO-Querschnitte

Jeitler, G. & Brandner, R., 2008, Modellbildug für Produkte und Konstruktionen aus Holz - Bedeutung von Simulation und Experiment. Graz: Verlag der Technischen Universität Graz, p. C-1-C-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

SCALING - Betrachtung von Skalenebenen in der Materialstruktur Holz in Verbindung mit der Anwendung von Modellansätzen

Brandner, R., 2008, Modellbildug für Produkte und Konstruktionen aus Holz - Bedeutung von Simulation und Experiment. Graz: Verlag der Technischen Universität Graz, p. B-01-B-48

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Bearing model for glued laminated timber in bending – new aspects concerning modelling

Brandner, R. & Schickhofer, G., 2007, COST E 55 Workshop - Graz. ., p. 1-31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Behavior of Glulam in Compression Perpendicular to Grain in different Strength Grades and Load Configurations

Augustin, M., Ruli, A., Brandner, R. & Schickhofer, G., 2007, COST E55 - Modelling of the performance of timber structures - 2nd Workshop and 4th MC Meeting - Eindhoven University of Technology. ., p. 1-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determination of Modulus of Shear and Elasticity of Glued Laminated Timber and related Examinations

Brandner, R., Gehri, E., Bogensperger, T. & Schickhofer, G., 2007, International Council for Research and Innovation in Building and Construction - Working Comission W18 - Timber Structures Meeting Forty. Germany: ., p. 40-12-2_1-40-12-2_20

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Size effect considerations for linear structural elements of timber

Brandner, R., Bogensperger, T., Jeitler, G. & Schickhofer, G., 2007, COST E55 - Modelling of the performance of timber structures - 2nd Workshop and 4th MC Meeting - Eindhoven University of Technology. ., p. 1-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2006

Behavior of Glulam in Compression Perpendicular to grain in Different Strength Grades and Load Configurations

Augustin, M., Ruli, A., Brandner, R. & Schickhofer, G., 2006, WCTE - 9th World Conference on Timber Engineering. Portland, OR / USA: ., p. 829-836

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Behavior of Glulam in Compression Perpendicular to Grain in different Strength Grades and Load Configurations

Augustin, M., Schickhofer, G., Ruli, A. & Brandner, R., 2006, International Council for Building Research, Studies and Documentation, Working Commission W 18 - Timber Structures, Meeting. Germany: ., p. 39-12-5-1-39-12-5-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Darstellung des Festigkeits- und Steifigkeitspotentials von BSH-Lamellen in Hinblick auf das "Trägermodell"

Brandner, R., 2006, Brettschichtholz - Ein Produkt mit Geschichte und Zukunft: Workshop anlässlich 100 Jahre Patentschrift Nr. 197773 Otto Hetzers. ., p. 4-1-4-28

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Das schwächste Glied in der Kette bestimmt den Level

Schickhofer, G., Brandner, R. & Jeitler, G., 2006, HOLZBAU: Aus der Praxis - Für die Praxis. ., p. 1-29

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

System effects of structural elements - determined for bending and tension

Brandner, R. & Schickhofer, G., 2006, WCTE 2006 - 9th World Conference on Timber Engineering. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Tensile Proof Loading to assure Quality of finger-jointed Structural Timber

Katzengruber, R., Schickhofer, G., Brandner, R. & Jeitler, G., 2006, World Conference on Timber Engineering. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File