Reinhard Brandner

Ass.Prof. Priv.-Doz. Dipl.-Ing. (FH) Dr.techn.

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2005 2019

2019

Block shear failure mechanism of axially-loaded groups of screws

Mahlknecht, U. & Brandner, R., 2019, In : Engineering Structures. 183, p. 220-242 23 p.

Research output: Contribution to journalArticleResearchpeer-review

Timber
Fibers
Fasteners
Stress concentration

Performance of axially-loaded self-tapping screws in hardwood: Properties and design

Brandner, R., Ringhofer, A. & Reichinger, T., 1 Jun 2019, In : Engineering Structures. 188, p. 677-699 23 p.

Research output: Contribution to journalArticleResearchpeer-review

Hardwoods
Timber
Loads (forces)
Bearings (structural)
Mechanical properties
2018

Application of European design principles to cross laminated timber

Fink, G., Kohler, J. & Brandner, R., Sep 2018, In : Engineering Structures. 171, p. 934-943

Research output: Contribution to journalArticleResearchpeer-review

Timber
Safety factor
Beams and girders
Reliability analysis
Materials properties

Basis of design principles – application to CLT

Fink, G., Brandner, R. & Kohler, J., 2018, Basis of Design Principles for Timber Structures: A state-of-the-art report by COST Action FP1402 / WG 1. Fink, G., Honfi, D., Kohler, J. & Dietsch, P. (eds.). Aachen: Shaker-Verlag GmbH, p. 111 114 p. (Berichte aus dem Bauwesen).

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

Cross laminated timber (CLT): Design approaches for dowel-type fasteners and connections

Ringhofer, A., Brandner, R. & Blaß, H. J., 2018, In : Engineering Structures. 171, p. 849-861

Research output: Contribution to journalArticleResearchpeer-review

Fasteners
Timber
Nails
Product design
Engineers
Timber
Compaction
Testing
Elastic moduli
Stiffness

Design approaches for dowel-type connections in CLT structures and their verification

Ringhofer, A., Brandner, R. & Blaß, H. J., 2018, Design of Connections in Timber Structures: A state-of-the-art report by COST Action F1402/WG3. Sandhaas, C., Munch-Andersen, J. & Dietsch, P. (eds.). Shaker-Verlag GmbH, p. 161-191 30 p.

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

Hauptversuchsreihe von geschraubten Rohrverbindern in Hartlaubholzprodukten: FFG BRIDGE 1 Projekt hardwood_SCREWS

Köberl, D. D. & Brandner, R., 2018

Research output: Book/ReportCommissioned reportResearch

Properties, Testing and Design of Cross Laminated Timber

Brandner, R. (ed.), Tomasi, R. (ed.), Moosbrugger, T. (ed.), Serrano, E. (ed.) & Dietsch, P. (ed.), 2018, Aachen: Shaker-Verlag GmbH. 466 p.

Research output: Book/ReportAnthologyResearchpeer-review

Rolling shear: Test configurations and properties of some European soft- and hardwood species

Ehrhart, T. & Brandner, R., 1 Oct 2018, In : Engineering Structures. 172, p. 554-572 19 p.

Research output: Contribution to journalArticleResearchpeer-review

Softwoods
Hardwoods
Timber
Ashes
Shear strength

Rolling shear in cross laminated timber (CLT): Experimental study of different wood species and important parameters for strength and stiffness

Ehrhart, T. & Brandner, R., 2018, Eastern European Conference on Timber Constructions (EECTC).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Some comments on and proposals for determining the compression perpendicular to grain properties of CLT: brief summary of a recent publication

Brandner, R., 2018, Properties, Testing and Design of Cross Laminated Timber. Shaker-Verlag GmbH, p. 147 149 p.

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

Test configurations for determining rolling shear properties with focus on cross laminated timber: a critical review

Ehrhart, T. & Brandner, R., 2018, Properties, Testing and Design of Cross Laminated Timber. Shaker-Verlag GmbH, p. 151 169 p.

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

2017

Axially-loaded self-tapping screws in solid timber and laminated timber products

Ringhofer, A., Schickhofer, G. (ed.) & Brandner, R. (ed.), 2017, Graz: Verlag der Technischen Universität Graz. (Monographic Series TU Graz: Timber Engineering & Technology; vol. TET 5)

Research output: Book/ReportBookResearchpeer-review

Cross laminated timber (CLT) diaphragms under shear: Test configuration, properties and design

Brandner, R., Dietsch, P., Dröscher, J., Schulte-Wrede, M., Kreuzinger, H. & Sieder, M., 2017, In : Construction & building materials. 147, p. 312-327

Research output: Contribution to journalArticleResearchpeer-review

Design approaches for dowel-type connections in CLT structures and their verification

Ringhofer, A., Brandner, R. & Blaß, H. J., 13 Sep 2017.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Design approaches for dowel-type connections in CLT structures and their verification

Ringhofer, A., Brandner, R. & Blaß, H. J., 13 Sep 2017, International Conference on Connections in Timber Engineering - From Research to Standards: Proceeding of the Conference of COST Action FP1402. Brandner, R., Ringhofer, A. & Dietsch, P. (eds.). p. 80-111

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Evaluation and approximation of timber connection properties for displacement-based analysis of CLT wall systems

Flatscher, G., Schickhofer, G. (ed.) & Brandner, R. (ed.), 2017, Graz: Verlag der Technischen Universität Graz. (Monographic Series TU Graz: Timber Engineering & Technology; vol. TET 6)

Research output: Book/ReportBookResearchpeer-review

Mechanical characterization of a pre-fabricated connection system for cross laminated timber structures in seismic regions

Polastri, A., Giongo, I., Angeli, A. & Brandner, R., 2017, In : Engineering Structures.

Research output: Contribution to journalArticleResearchpeer-review

Timber
Earthquakes
Compaction

Probabilistic models for the withdrawal behavior of single self-tapping screws in the narrow face of cross laminated timber (CLT)

Brandner, R., Ringhofer, A. & Grabner, M., 2017, In : European Journal of Wood and Wood Products. 76, 1, p. 13-30 18 p.

Research output: Contribution to journalArticleResearchpeer-review

probabilistic models
Timber
screws
timber
wood technology
2016

Basis of design principles – application to CLT

Köhler, J., Fink, G. & Brandner, R., 2016, Cross Laminated Timber – A competitive wood product for visionary and fire safe buildings: Proceedings of the Joint Conference of COST Actions FP1402 & FP1404. Falk, A., Dietsch, P. & Schmid, J. (eds.). KTH Royal Institute of Technology, School of Architecture and the Built Environment, Department of Civil and Architectural Engineering Division of Building Materials, SE-100 44 Stockholm, p. 45-63

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Basis of design principles – application to CLT

Köhler, J., Fink, G. & Brandner, R., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Block Shear Failure Mode of Axially Loaded Groups of Screws

Mahlknecht, U., Brandner, R. & Augustin, M., 2016. 2 p.

Research output: Contribution to conferenceAbstractResearchpeer-review

Block shear fialure mode of axially loaded group of screws

Mahlknecht, U., Brandner, R. & Augustin, M., 23 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fasteners
Failure modes
Lead screws
Fibers
Stiffness

Block shear fialure mode of axially loaded groups of screws

Mahlknecht, U., Brandner, R. & Augustin, M., 23 Aug 2016, World Conference on Timber Engineering 2016, Vienna.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Fasteners
Failure modes
Lead screws
Fibers
Stiffness

Cross laminated timber (CLT): overview and development

Brandner, R., Flatscher, G., Ringhofer, A., Schickhofer, G. & Thiel, A., Mar 2016, In : European Journal of Wood and Wood Products. 74, 3

Research output: Contribution to journalArticleResearchpeer-review

Der Einsatz des Götterbaums im Baubereich

Brandner, R. & Müller, U., Mar 2016, Holzbau Austria, p. 54-57.

Research output: Contribution to specialist publicationArticleResearch

Der Einsatz des Götterbaums im Baubereich

Müller, U., Brandner, R. & Schickhofer, G., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Experimental analysis of a new connection system for CLT structures

Polastri, A., Brandner, R. & Casagrande, D., 2016.

Research output: Contribution to conferenceAbstractResearchpeer-review

Experimental analysis of a new connection system for CLT structures

Polastri, A., Brandner, R. & Casagrande, D., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Experimental analysis of a new connection system for CLT structures

Polastri, A., Brandner, R. & Casagrande, D., 2016, Structures and Architecture - Proceedings of the 3rd International Conference on Structures and Architecture. p. 119-127 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Group action of axially-loaded screws in the narrow face of cross laminated timber

Brandner, R., 2016, Proceedings of the World Conference on Timber Engineering (WCTE 2016). TU-Verlag, Technische Universität Wien, 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

GROUP ACTION OF AXIALLY-LOADED SCREWS IN THE NARROW FACE OF CROSS LAMINATED TIMBER

Brandner, R., 2016. 2 p.

Research output: Contribution to conferenceAbstractResearchpeer-review

GROUP ACTION OF AXIALLY-LOADED SCREWS IN THE NARROW FACE OF CROSS LAMINATED TIMBER

Brandner, R., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Introduction to CLT, Product Properties, Strength Classes

Schickhofer, G., Brandner, R. & Bauer, H., Mar 2016, Cross laminated Timber – a competitive wood product for visionary and fire safe buildings: Joint Conference of COST Actions FP1402 and FP1404.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Introduction to CLT – product properties – strength classes

Schickhofer, G., Brandner, R. & Bauer, H., 10 Mar 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Samples of iid Lognormals: approximations for characteristics of minima

Brandner, R. & Stadlober, E., 2016, In : Communications in statistics / Simulation and computation. 45, p. 1-15

Research output: Contribution to journalArticleResearchpeer-review

Shear properties of cross laminated timber (CLT) under in-plane load: test configuration and experimental study

Brandner, R., Dietsch, P., Dröscher, J., Schulte-Wrede, M., Kreuzinger, H., Sieder, M., Schickhofer, G. & Winter, S., 2016, In : New Zealand Timber Design Journal. 24, 3, p. 14-27

Research output: Contribution to journalArticleResearchpeer-review

ULS Design of CLT Elements – Basics and some Special Topics

Thiel, A. & Brandner, R., 10 Mar 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

ULS Design of CLT Elements – Basics and some Special Topics

Thiel, A. & Brandner, R., Mar 2016, Joint Conference of COST Actions FP1402 and FP1404 Cross Laminated Timber – a competitive wood product for visionary and fire safe buildings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

A Universal Approach for Withdrawal Properties of Self-Tapping Screws in Solid Timber and Laminated Timber Products

Ringhofer, A., Brandner, R. & Schickhofer, G., 1 Oct 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A Universal Approach for Withdrawal Properties of Self-Tapping Screws in Solid Timber and Laminated Timber Products

Ringhofer, A., Brandner, R. & Schickhofer, G., 2015, International Network on Timber Engineering Research. Karlsruhe: ., p. 79-98

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Universal Approach for Withdrawal Properties of Self-Tapping Screws in Solid Timber and Laminated Timber Products

Ringhofer, A., Brandner, R. & Schickhofer, G., 24 Aug 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Axial beanspruchte Holzschrauben in Vollholz, Brettschichtholz und Brettsperrholz

Ringhofer, A., Brandner, R., Flatscher, G. & Schickhofer, G., 2015, In : Bautechnik. 92, 11, p. 770-782

Research output: Contribution to journalArticleResearchpeer-review

CLT Diaphragms under in-plane shear - Evaluation of Test Results and Modelling

Brandner, R., Dietsch, P., Dröscher, J., Schulte-Wrede, M., Kreuzinger, H., Sieder, M., Schickhofer, G. & Winter, S., 1 Oct 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Cross Laminated Timber (CLT) – Overview and Development

Brandner, R., Flatscher, G., Ringhofer, A., Schickhofer, G. & Thiel, A., 15 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dem Laubholz eine Chance - Innovative Holzverwendung

Brandner, R. & Grabner, M., 11 Sep 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch