Research output per year
Research output per year
- 22 results
Search results
-
2024
Engineering approach for modeling the deformation and fracture behavior of thin welds
Silvayeh, Z., Domitner, J., Müller, M., Auer, P., Sommitsch, C. & Mayr, P., Mar 2024, In: Results in Engineering. 21, 101799.Research output: Contribution to journal › Article › peer-review
Open Access -
Experimental and Numerical Analysis of the Three-Point Bending Behavior of Hybrid Adhesive-Bonded Aluminum–Wood Plates
Graf, E., Matz, P., Auer, P., Kurzböck, C., Krenke, T., Painer, J., Gruber, L., Frieß, M., Bauer, C., Sommitsch, C. & Domitner, J., 1 Apr 2024, In: Journal of Materials Engineering and Performance. 33Research output: Contribution to journal › Article › peer-review
Open Access -
Influence of irregular rivet-die offsets on the integrity and on the load-bearing capacity of self-piercing-riveted aluminum alloy joints
Silvayeh, Z., Stippich, J., Auer, P. & Domitner, J., 2024, In: Procedia Structural Integrity. 54, p. 431-436 6 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Thermal cycling effects on the local microstructure and mechanical properties in wire-based directed energy deposition of nickel-based superalloy
Pixner, F., Warchomicka, F. G., Lipińska, M., Elmiger, S., Jechtl, C., Auer, P., Riedlsperger, F. K., Buzolin, R. H., Domitner, J., Lewandowska, M. & Enzinger, N., 5 Mar 2024, In: Additive Manufacturing. 83, 104066.Research output: Contribution to journal › Article › peer-review
Open Access -
2023
Influence of elevated surface temperature on the formability in cold forming of aluminum alloy sheets
Hodzic, E., Shafiee Sabet, A., Silvayeh, Z., Auer, P., Drexler, A., Sommitsch, C. & Domitner, J., 2023, In: IOP Conference Series: Materials Science and Engineering. 1284, 8 p., 012032.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Load-Bearing Capacities and Fracture Modes of Self-Piercing-Riveted, Adhesive-Bonded and Riv-Bonded Aluminum Joints at Quasi-Static and Cyclic Loadings
Domitner, J., Silvayeh, Z., Predan, J., Auer, P., Stippich, J., Sommitsch, C. & Gubeljak, N., 2023, In: Journal of Materials Engineering and Performance. 11 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Load-bearing capacity of hybrid riv-bonded aluminum-magnesium joints at quasi-static and cyclic loadings
Domitner, J., Silvayeh, Z., Predan, J., Auer, P., Stippich, J., Enzinger, N. & Gubeljak, N., 3 Feb 2023, In: Journal of Manufacturing Processes. 87, p. 133-140 8 p.Research output: Contribution to journal › Article › peer-review
Open AccessFile -
Mechanical performance of hybrid joints of aluminum sheets and laminated beech veneer plates: an experimental prestudy
Silvayeh, Z., Domitner, J., Predan, J., Auer, P., Graf, E., Ferlic, L., Krenke, T., Sommitsch, C. & Gubeljak, N., 2023, In: Procedia Structural Integrity. 51, p. 141-144Research output: Contribution to journal › Conference article › peer-review
Open Access -
2022
Influence of the Sheet Edge Condition on the Fracture Behavior of Riv-Bonded Aluminum-Magnesium Joints
Domitner, J., Silvayeh, Z., Predan, J., Jerenec, F., Auer, P., Stippich, J., Ferlic, L., Stefane, P., Sommitsch, C. & Gubeljak, N., 2022, In: Key Engineering Materials. 926, p. 1541-1548 8 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Riv-Bonding of Aluminum Alloys with High-Strength Steels against the Favorable Joining Direction
Domitner, J., Auer, P., Stippich, J., Silvayeh, Z., Jessernig, S., Peiser, L., Hönsch, F. & Sommitsch, C., 2022, In: Journal of Materials Engineering and Performance. 31, 9, p. 6970-6979 10 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Viscoplastic Self-Consistent (VPSC) Modeling for Predicting the Deformation Behavior of Commercial EN AW-7075-T651 Aluminum Alloy
Domitner, J., Buzolin, R. H., Patil, S., Auer, P., Papenberg, N., Kabliman, E., Silvayeh, Z., Drexler, A. & Grabner, F., 2022, In: Key Engineering Materials. 926, p. 2109-2118 10 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
2021
Comparison of numerical models for investigating deep drawing of thin-walled steel cups
Auer, P., Lohinger, T., Unterrainer, M., Burböck, A., Sommitsch, C. & Domitner, J., 2021.Research output: Contribution to conference › Poster
Open AccessFile -
Grid Load Mitigation in EV Fast Charging Stations Through Integration of a High-Performance Flywheel Energy Storage System with CFRP Rotor
Buchroithner, A., Haidl, P., Preßmair, R., Wegleiter, H., Thormann, B., Kienberger, T., Auer, P. & Domitner, J., 1 Nov 2021, IGESSC 2021 Conference Proceedings (IEEE Xplore). 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
Numerical Simulation of Tube Bending Supported by Hydraulic Pressure for Manufacturing Butt-Welding Fittings
Domitner, J., Auer, P. & Sommitsch, C., 2021, Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity. Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A. & Yoshida, Y. (eds.). The Minerals, Metals & Materials Society (TMS), p. 2019-2029 11 p. (Minerals, Metals and Materials Series).Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
2019
Development of the UNAB facade
Schober, H., Boskovic, V., Auer, P., Brandl, D. & Mach, T., 2019, Sustainable Design Process & Integrated Facades. Kreiner, H. & Passer, A. (eds.). Graz: Verlag der Technischen Universität Graz, p. 76-87Research output: Chapter in Book/Report/Conference proceeding › Chapter
-
Modeling single-side inflating of flow channels in roll-bonded aluminum panels
Domitner, J., Auer, P., Eckhard, R., Ferčec, J. & Sommitsch, C., 2019, Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
The solar-thermally activated UNAB facade element
Schober, H., Boskovic, V., Auer, P., Banozic, M. & Stavric, M., 2019, Sustainable Design Process & Integrated Facades. Kreiner, H. & Passer, A. (eds.). Verlag der Technischen Universität Graz, p. 106-119Research output: Chapter in Book/Report/Conference proceeding › Chapter
-
2018
Aluminiumpaneele für thermisch aktive Gebäudefassaden
Eckhard, R., Auer, P., Stern, T., Schober, H., Brandl, D. & Domitner, J., 2018.Research output: Contribution to conference › Poster
-
2013
Closed loop simulation of the chain "cold-forming - welding - crash load" for the prediction of the crash behavior of car body components
Kolleck, R., Auer, P., Schröder, M., Trattnig, G., Heller, D. & Walch, C., 7 May 2013.Research output: Contribution to conference › (Old data) Lecture or Presentation
-
2012
FEM Simulation von mehrstufigen Umformprozessen im Folgeverbund
Auer, P., 2012.Research output: Contribution to conference › (Old data) Lecture or Presentation
-
2011
Failure prediction method for hydro forming simulation of thick walled tubes
Auer, P. & Kolleck, R., 2011, he 14th International ESAFORM Conference on Material Forming: ESAFORM 2011. AIP Conference Proceedings, Volume 1353. AIP Conference Proceedings. Issue 1 ed. ., Vol. Volume 1353. p. 295-300 300 p.Research output: Chapter in Book/Report/Conference proceeding › Conference paper › peer-review
-
Hydroforming of thick walled tubes Process description, simulation concept and advanced failure criteria
Auer, P., Kolleck, R. & Auer, G., 19 Nov 2011, p. 397. 408 p.Research output: Contribution to conference › Paper