Oszkar Biro

Univ.-Prof. Dipl.-Ing. Dr.techn.

1985 …2020
If you made any changes in Pure these will be visible here soon.

Research Output 1985 2019

Numerical analysis of PM motor performance considering rotor movement

Stermecki, A., Ticar, I., Biro, O. & Preis, K., 2004, Proceedings of the 11th IEEE conference on electromagnetic field computation, CEFC 2004. ., p. 222-222

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical Analysis of Steady-State Operation of Induction Motors by an Approximate Frequency Domain Technique

Stermecki, A., Biro, O., Preis, K., Rainer, S. & Ofner, G., 2011, In : e&i - Elektrotechnik und Informationstechnik. 128, p. 81-85

Research output: Contribution to journalArticleResearchpeer-review

Numerical Analysis of the Steady-State Operation of Induction Motors by an Approximate Frequency Domain Technique

Stermecki, A., Biro, O., Preis, K., Rainer, S. & Ofner, G., 2008.

Research output: Contribution to conferencePosterResearch

Numerical Analysis of the Steady-State Operation of Induction Motors by an Approximate Frequency Domain Technique

Stermecki, A., Biro, O., Preis, K., Rainer, S. & Ofner, G., 2008, CEFC 2008 Conference Proceedings [Elektronische Ressource]. ., p. 251-251

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical and experimental investigation of the structural characteristics of stator core stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2013, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1643-1664

Research output: Contribution to journalArticleResearchpeer-review

Numerical and experimental investigations of a cavity resonator with a small obstacle

Bardi, I., Kabos, P., Biro, O., Hyben, P., Preis, K., Richter, K. R. & Vrisk, G., 1991, Proceedings of the Japan-Hungary Joint Seminar on Applied Electromagnetics in Materials and Computational Technology. ., p. 45-48

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical and Experimental Investigations of the Structural Characteristics of Stator Core Stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2012.

Research output: Contribution to conferencePosterResearch

Numerical and Experimental Investigations of the Structural Characteristics of Stator Core Stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2012, The 15th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering. Institute for Fundamentals and Theory in Electrical Engineering, TU Graz, p. 144-153

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical computation of the magnetic field due to a crack in a conducting plate

Biro, O., Hollaus, K., Pávó, J. & Preis, K., 28 Jun 2000.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical computation of the magnetic field due to a crack in a conducting plate

Biro, O., Hollaus, K., Pávó, J. & Preis, K., 2001, Studies in Applied Electromagnetics and Mechancis. Electromagnetic Nondestructive Evaluation (V) ed. Amsterdam: ., Vol. 21. p. 11-15

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Numerical computation of the magnetic field due to a crack in a conducting plate

Biro, O., Hollaus, K., Pávó, J. & Preis, K., 2000, Short Papers. ., p. 7-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Numerical Determination of Field and Rotor Current Harmonics in Induction Machines

Rainer, S., Biro, O., Stermecki, A. & Weilharter, B., 2010.

Research output: Contribution to conferencePosterResearch

Numerical Determination of Field and Rotor Current Harmonics in Induction Machines

Rainer, S., Biro, O., Stermecki, A. & Weilharter, B., 2010, The 14th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering. ., p. 30-30

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical investigation of the 3D vibrational behaviour of skewed induction machines due to rotating force waves

Weilharter, B., Biro, O. & Rainer, S., 2011, (Accepted/In press) ISEF 2011 - International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical investigation of the 3D vibrational behaviour of skewed induction machines due to rotating force waves

Weilharter, B., Biro, O. & Rainer, S., 2011.

Research output: Contribution to conferencePosterResearch

Numerical Investigations of the Field Regions for Wire Based Antenna Systems

Baumgartner, P., Renhart, W., Biro, O. & Bauernfeind, T., 17 Jul 2019.

Research output: Contribution to conferencePosterResearch

Numerical Investigations of the Field Regions for Wire Based Antenna Systems

Baumgartner, P., Bauernfeind, T., Renhart, W. & Biro, O., 15 Jul 2019, Proceedings of the 22nd International Conference on the Computation of Electromagnetic Fields. 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical simulation and design of a fluxset sensor by finite element method

Preis, K., Bardi, I., Biro, O., Richter, K. R., Pavo, J., Gaspacis, A. & Ticar, I., 1997, Proceeding of the 7th COMPUMAG Conference on the Computation of Electromagnetic Fields. ., p. 99-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical simulation and design of a fluxset sensor by finite element method

Preis, K., Bardi, I., Biro, O., Richter, K. R., Pavo, J., Gaspacis, A. & Ticar, I., 1998, In : IEEE Transactions on Magnetics. 34, p. 3475-3478

Research output: Contribution to journalArticleResearchpeer-review

Numerical simulation and design of a fluxset sensor by finite element method

Preis, K., Bardi, I., Biro, O., Richter, K. R., Pavo, J., Gaspacis, A. & Ticar, I., 2 Nov 1997.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Simulation and Experimental Validation of Coupled Flow, Heat Transfer and Electromagnetic Problems in Electrical Transformers

Smolka, J., Biro, O. & Nowak, A., 2009, In : Archives of Computational Methods in Engineering. 16, 3, p. 319-355

Research output: Contribution to journalArticleResearchpeer-review

Numerical simulation of conductivity changes in the human thorax caused by aortic dissection

Reinbacher-Köstinger, A., Badeli, V., Biro, O. & Magele, C., 2018.

Research output: Contribution to conferenceAbstractResearchpeer-review

Numerical simulation of conductivity changes in the human thorax caused by aortic dissection

Reinbacher-Köstinger, A., Badeli, V., Biro, O. & Magele, C., 2019, (Accepted/In press) In : IEEE Transactions on Magnetics.

Research output: Contribution to journalConference articleResearchpeer-review

Numerical simulation of conductivity changes in the human thorax caused by aortic dissection

Reinbacher-Köstinger, A., Badeli, V., Biro, O. & Magele, C., 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Numerical Simulation of Conductivity Changes in the Human Thorax Caused by Aortic Dissection

Reinbacher-Köstinger, A., Badeli, V., Biro, O. & Magele, C., 1 Jun 2019, In : IEEE Transactions on Magnetics. 55, 6, 8661768.

Research output: Contribution to journalArticleResearchpeer-review

Dissection
Blood
Computer simulation

Numerical Simulation of Electromagnetic Phenomena in Motor End-Regions

Stermecki, A., Biro, O., Ofner, G. & Lang, H., 2011, In : e&i - Elektrotechnik und Informationstechnik. 128, p. 167-173

Research output: Contribution to journalArticleResearchpeer-review

Numerical Simulation of Electromagnetic Phenomena in the End-Winding Region of a Synchronous Generator

Riegler, S., Stermecki, A. & Biro, O., 21 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Simulation of the End-Winding Deformations in the Synchronous Machine under Short-Circuit Conditions using FEM

Lang, H., Stermecki, A., Biro, O. & Ofner, G., 2011, In : e&i - Elektrotechnik und Informationstechnik. 128, p. 161-166

Research output: Contribution to journalArticleResearchpeer-review

Numerical Study of the Cooling Air Flow in a Hydro Generator with various Ventilation Systems

Klomberg, S., Farnleitner, E., Kastner, G. & Biro, O., 2014, European Congress on Computational Methods in Applied Sciences and Engineering. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerische und Experimentelle Modalanalyse eines Statorblechpaketes

Mair, M., Rainer, S., Weilharter, B., Ellermann, K. & Biro, O., 2011, Proceedings in Applied Mathematics and Mechanics. Weinheim: Wiley-VCH , Vol. 11. p. 245-246

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the computation of the inductance of a coil in nonlinear magnetic circuit from a finite element field solution

Bardi, I., Biro, O. & Preis, K., 1995, Proceedings des 40. Internationalen Wissenschaftlichen Kolloquiums. ., p. 174-179

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the Convergence of the Transfinite-Element Method

Weiss, B., Biro, O., Caldera, P., Hollaus, K., Paoli, G. & Preis, K., 2007, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 26, 3, p. 600-611

Research output: Contribution to journalArticleResearchpeer-review

On the Convergence of the Transfinite-Element Method

Weiss, B., Biro, O., Caldera, P., Hollaus, K., Paoli, G., Plieschnegger, G., Preis, K. & Stockreiter, C., 18 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On the Convergence of the Transfinite-Element Method

Weiss, B., Biro, O., Caldera, P., Hollaus, K., Paoli, G., Preis, K. & Stockreiter, C., 2006, The 12th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering. ., p. 5-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

On the Convergence of Transient Eddy-Current Problems

Weiss, B. & Biro, O., 2004, In : IEEE Transactions on Magnetics. 40, 2, p. 957-960

Research output: Contribution to journalArticleResearchpeer-review

On the Convergence of Transient Eddy-Current Problems

Weiss, B. & Biro, O., 2003, Record of 14th COMPUMAG Conference on the Computation of Magnetic Fields, Vol. I. Saratoga Springs: ., p. 220-221

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the treatment of sharp corners in the FEM analysis of high frequency problems

Bardi, I., Biro, O., Dyczij-Edlinger, R., Preis, K. & Richter, K. R., 1994, In : IEEE Transactions on Magnetics. 30, p. 3108-3111

Research output: Contribution to journalArticleResearchpeer-review

On the treatment of sharp corners in the FEM analysis of high frequency problems

Bardi, I., Biro, O., Dyczij-Edlinger, R., Preis, K. & Richter, K. R., 31 Oct 1993.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On the Use of a Two-Component Vector Potential in the Numerical Analysis of 3D electromagnetic Fields

Biro, O., 1986, Proceedings of the URSI International Symposium on Electromagnetic Theory. ., p. 618-620

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the use of the magnetic vector potential in the finite element analysis of 3D eddy currents

Biro, O. & Preis, K., 1989, In : IEEE Transactions on Magnetics. 25, p. 3145-3159

Research output: Contribution to journalArticleResearchpeer-review

On the use of the magnetic vector potential in the nodal and edge finite element analysis of 3D magnetostatic fields

Biro, O., Preis, K. & Richter, K. R., 10 Jun 1995.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Optimal Convergence of the Fixed-Point Method for Nonlinear Eddy Current Problems

Koczka, G., Außerhofer, S., Biro, O. & Preis, K., 2009, In : IEEE Transactions on Magnetics. 45, 3, p. 948-951

Research output: Contribution to journalArticleResearchpeer-review

Optimal Convergence of the Fixed-Point Method for Nonlinear Eddy Current Problems

Koczka, G., Außerhofer, S., Biro, O. & Preis, K., 2008, CEFC 2008 Conference Proceedings [Elektronische Ressource]. ., p. 583-583

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Optimal Convergence of the Fixed-Point Method for Nonlinear Eddy Current Problems

Koczka, G., Außerhofer, S., Biro, O. & Preis, K., 14 May 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Optimal fixed-point method for solving 3D nonlinear periodic eddy current problems

Koczka, G., Außerhofer, S., Biro, O. & Preis, K., 2009, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 28, 4, p. 1059-1067

Research output: Contribution to journalArticleResearchpeer-review

Optimal fixed-point method for solving 3D nonlinear periodic eddy-current problems

Koczka, G., Außerhofer, S., Biro, O. & Preis, K., 2008, proceedings of the 13th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering. ., p. 28061-1-28061-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Optimal fixed-point method for solving 3D nonlinear periodic eddy-current problems

Koczka, G., Außerhofer, S., Biro, O. & Preis, K., 2008.

Research output: Contribution to conferencePosterResearch

Optimization of electromagnetic devices

Magele, C., Preis, K., Biro, O. & Richter, K. R., 1991, Proceedings of the Japan-Hungary Joint Seminar on Applied Electromagnetics in Materials and Computational Technology. ., p. 21-24

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review