Oszkar Biro

Univ.-Prof. Dipl.-Ing. Dr.techn.

1985 …2020
If you made any changes in Pure these will be visible here soon.

Research Output 1985 2019

2014

Coupling Node Reduction of a Synchronous Machine Using Multipoint-Constraints

Klanner, M., Mair, M., Diwoky, F., Biro, O. & Ellermann, K., 2014, 8th International Styrian Noise, Vibration \& Harshness Congress. SAE International, p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Effects of Inverter Supply on the Iron Loss Characteristics of Doubly Fed Induction Machines

Handgruber, P., Schernthanner, S., Stermecki, A., Biro, O. & Ofner, G., 2014, (Accepted/In press) International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Effects of Inverter Supply on the Iron Loss Characteristics of Doubly Fed Induction Machines

Handgruber, P., Schernthanner, S., Stermecki, A., Biro, O. & Ofner, G., 2014.

Research output: Contribution to conferencePosterResearch

Finite Element Analysis of Three-Phase Three-Limb Power Transformers under DC Bias

Biro, O., Koczka, G., Leber, G., Preis, K. & Wagner, B., 2014, In : IEEE Transactions on Magnetics. 50, 2, p. Article#-7013904

Research output: Contribution to journalArticleResearchpeer-review

Finite Element Simulation of Impedance Measurement Effects of NFC Antennas

Bauernfeind, T., Preis, K., Renhart, W., Biro, O. & Gebhart, M., 2014, Biennial IEEE Conference on Electromagnetic Field Computation. ., p. 88-88

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Finite Element Simulation of Impedance Measurement Effects of NFC Antennas

Bauernfeind, T., Preis, K., Renhart, W., Biro, O. & Gebhart, M., 2014.

Research output: Contribution to conferencePosterResearch

Finite element solution of nonlinear eddy current problems with periodic excitation and its industrial applications

Biro, O., Koczka, G. & Preis, K., 2014, In : Applied Numerical Mathematics. 79, p. 3-17

Research output: Contribution to journalArticleResearchpeer-review

FINITE ELEMENT TECHNIQUES IN THE DESIGN OF POWER TRANSFORMERS

Biro, O., Janic, Z., Leber, G., Preis, K. & Wagner, B., 16 Oct 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Frequency Domain Decomposition of 3-D Eddy Current Problems in Steel Laminations of Induction Machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2014, In : IEEE Transactions on Magnetics. 50, 2, p. 901-904

Research output: Contribution to journalArticleResearchpeer-review

Ground Compensation Coils and their Influence on the Field Distribution of Loop Antennas

Bauernfeind, T., Preis, K., Renhart, W. & Biro, O., 2014, International IGTE Symposium on Numerical Field Calculation in Electrical Engineering . ., p. 58-58

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Implementation of a New Simulation Strategy for a Cooling Study of Large Hydro Generators

Klomberg, S., Farnleitner, E., Kastner, G. & Biro, O., 2014, Proceedings of the International Conference on Power Electronics, Machines and Drives. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Multiphysical simulations in computational electromagnetics

Biro, O., 2014, International Conference on Computational Electromagnetics. ., p. Video-pp

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Numerical Study of the Cooling Air Flow in a Hydro Generator with various Ventilation Systems

Klomberg, S., Farnleitner, E., Kastner, G. & Biro, O., 2014, European Congress on Computational Methods in Applied Sciences and Engineering. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Overview of Finite Element Techniques in the Design of Power Transformers

Biro, O., Janic, Z., Leber, G., Preis, K. & Wagner, B., 2014, Biennial IEEE Conference on Electromagnetic Field Computation. ., p. OC2-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Overview of Finite Element Techniques in the Design of Power Transformers

Biro, O., Janic, Z., Leber, G., Preis, K. & Wagner, B., 27 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Validation of a Heat Transfer Model for End Winding Bars of Large Hydro Generators

Klomberg, S., Farnleitner, E., Kastner, G. & Biro, O., 2014, International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Validation of Finite Element Solutions of Nonlinear, Periodic Eddy Current Problems

Plasser, R. & Biro, O., 2014, In : Archives of Electrical Engineering. 63, 4, p. 591-600

Research output: Contribution to journalArticleResearchpeer-review

Validation of Finite Element Solutions of Nonlinear, Periodic Eddy Current Problems

Plasser, R. & Biro, O., 2014.

Research output: Contribution to conferencePosterResearch

Validation of Finite Element Solutions of Nonlinear, Periodic Eddy Current Problems

Plasser, R. & Biro, O., 2014, (Accepted/In press) International Conference on Computational Electromagnetics. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Validation of Numerical Approaches for Simulating the Heat Transfer in Stator Ducts with Measurements

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2014, In : IEEE Transactions on Magnetics. 50, 2, p. 261-264

Research output: Contribution to journalArticleResearchpeer-review

2013

A Finite Element Based Circuit Model Approach for Skewed Electrical Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2013.

Research output: Contribution to conferencePosterResearch

An Extended Finite Element-Based Circuit Model Approach for PMSM including Rotor Eccentricity

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 10 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characteristics of the Convective Heat Transfer Coefficient at the End Winding of a Hydro Generator

Klomberg, S., Farnleitner, E., Kastner, G. & Biro, O., 2013, Proceedings of the ASME 2013 Power Conference. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of a new simulation tool for computation of the synchronous generator end-winding deformations

Lang, H., Stermecki, A. & Biro, O., 10 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evaluation of interlaminar eddy currents in induction machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 10 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evaluation of Interlaminar Eddy Currents in Induction Machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2013, (Accepted/In press) IECON - Annual Conference of the IEEE Industrial Electronics Society. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimental investigation of the vibration behaviour of a laminated stack with winding

Weilharter, B., Mair, M., Lang, H., Ellermann, K. & Biro, O., 2013, IECON 2013 - 39th Annual Conference of the IEEE. IEEE Industrial Electronics Society, p. 2816-2820

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Finite Element Analysis of Three-Phase Three-Limb Power Transformers under DC

Biro, O., Koczka, G., Leber, G., Preis, K. & Wagner, B., 2013, (Accepted/In press) Technical Program of the 19th Conference on the Computation of Electromagnetic Fields. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Finite Element Analysis of Three-Phase Three-Limb Power Transformers under DC Bias

Biro, O., Koczka, G., Leber, G., Preis, K. & Wagner, B., 2013.

Research output: Contribution to conferencePosterResearch

Finite Element Based Circuit Model Approach for Skewed Electrical Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2013, (Accepted/In press) Conference on the Computation of Electromagnetic Fields. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Frequency Domain Decomposition of 3-D Eddy Current Problems in Steel

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 4 Jul 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Frequency Domain Decomposition of 3-D Eddy Current Problems in Steel Laminations of Induction Machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2013, (Accepted/In press) Conference on the Computation of Electromagnetic Fields. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical and experimental investigation of the structural characteristics of stator core stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2013, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1643-1664

Research output: Contribution to journalArticleResearchpeer-review

Numerical Simulation of Electromagnetic Phenomena in the End-Winding Region of a Synchronous Generator

Riegler, S., Stermecki, A. & Biro, O., 21 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Parameter identification of a finite element based model of wound rotor induction machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2013, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1665-1678

Research output: Contribution to journalArticleResearchpeer-review

Three-Dimensional Eddy-Current Analysis in Steel Laminations of Electrical Machines as a Contribution for Improved Iron Loss Modeling

Handgruber, P., Stermecki, A., Biro, O., Belahcen, A. & Dlala, E., 2013, In : IEEE Transactions on Industry Applications. 49, 5, p. 2044-2052

Research output: Contribution to journalArticleResearchpeer-review

Three-Dimensional Eddy Current Loss Modeling in Steel Laminations of Skewed Induction Machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2013, In : IEEE Transactions on Magnetics. 49, 5, p. 2033-2036

Research output: Contribution to journalArticleResearchpeer-review

Transient electromagnetic field, losses and forces in a synchronous turbogenerator rotor

Pantelyat, M., Biro, O. & Stermecki, A., 2013, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 3, p. 794-808

Research output: Contribution to journalArticleResearchpeer-review

Validation of Finite Element Solutions of Nonlinear, Periodic Eddy-Current Problems

Plasser, R. & Biro, O., 21 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Validation of finite element solutions of nonlinear, peroiodic eddy current problems

Plasser, R. & Biro, O., 2013, International PhD & DLA Symposium. ., p. 125-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Validation of Measurements with Conjugate Heat Transfer Models

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2013, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1707-1720

Research output: Contribution to journalArticleResearchpeer-review

Validation of Numerical Approaches for Simulating the Heat Transfer in Stator

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2013, (Accepted/In press) Technical Program of the 19th Conference on the Computation of Electromagnetic Fields. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Validation of Numerical Approaches for Simulating the Heat Transfer in Stator Ducts with Measurements

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2013, (Accepted/In press) Conference on the Computation of Electromagnetic Fields. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Validation of Numerical Approaches for Simulating the Heat Transfer in Stator Ducts with Measurements

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2013.

Research output: Contribution to conferencePosterResearch

2012

3-D Eddy Current Analysis in Steel Laminations of Electrical Machines as a Contribution for Improved Iron Loss Modeling

Handgruber, P., Stermecki, A., Biro, O., Belahcen, A. & Dlala, E., 2 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

3-D Eddy Current Analysis in Steel Laminations of Electrical Machines as a Contribution for Improved Iron Loss Modeling

Handgruber, P., Stermecki, A., Biro, O., Belahcen, A. & Dlala, E., 2012, International Conference on Electrical Machines. ., p. 16-22

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Additional Eddy Current Losses in Induction Machines Due to Interlaminar Short Circuits

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2012, International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. ., p. 190-197

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Additional Eddy Current Losses in Induction Machines Due to Interlaminar Short Circuits

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 17 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

An Improved Physical Phase Variable Model for Permanent Magnet Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012, International Conference on Electrical Machines. ., p. 53-58

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review