Oszkar Biro

Univ.-Prof. Dipl.-Ing. Dr.techn.

1985 …2020
If you made any changes in Pure these will be visible here soon.

Research Output 1985 2019

2012

Influence of the Non-Linear UHF-RFID IC Impedance on the Backscatter Abilities of a T-Match Tag Antenna Design

Bauernfeind, T., Preis, K., Koczka, G., Maier, S. & Biro, O., 2012, In : IEEE Transactions on Magnetics. 48, 2, p. 755-758

Research output: Contribution to journalArticleResearchpeer-review

Investigation of the Scattering Behavior of Transponder Antennas in Case of Nonlinear Termination

Bauernfeind, T., Preis, K., Koczka, G. & Biro, O., 2012, International Workshop on Finite Elements for Microwave Engineering. ., p. 26-26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of the Scattering Behavior of Transponder Antennas in Case of Nonlinear Termination

Bauernfeind, T., Koczka, G., Preis, K. & Biro, O., 4 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Measurements and simulations of the convective heat transfer coefficients on the end-windings of an electrical machine

Hettegger, M., Biro, O., Streibl, B. & Neudorfer, H., 2012, In : IEEE Transactions on Industrial Electronics. 59, 5, p. 2299 - 2308

Research output: Contribution to journalArticleResearchpeer-review

Numerical and Experimental Investigations of the Structural Characteristics of Stator Core Stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2012.

Research output: Contribution to conferencePosterResearch

Numerical and Experimental Investigations of the Structural Characteristics of Stator Core Stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2012, The 15th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering. Institute for Fundamentals and Theory in Electrical Engineering, TU Graz, p. 144-153

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Parameter Identification of a Finite Element Based Model of Wound Rotor Induction Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2012, International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. ., p. 232-237

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Scattering Calculations of Passive UHF-RFID Transponders

Bauernfeind, T., Koczka, G., Preis, K. & Biro, O., 2012, International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. ., p. 123-126

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Scattering Calculations of Passive UHF-RFID Transponders

Bauernfeind, T., Koczka, G., Preis, K. & Biro, O., 2012.

Research output: Contribution to conferencePosterResearch

Three-Dimensional Eddy Current Loss Modeling in Steel Laminations of Skewed Induction Machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2012.

Research output: Contribution to conferencePosterResearch

Three-Dimensional Eddy Current Loss Modeling in Steel Laminations of Skewed Induction Machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2012, (Accepted/In press) Biennial IEEE Conference on Electromagnetic Field Computation. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Validation of a Comprehensive Analytic Noise Computation Method for Induction Machines

Weilharter, B., Biro, O., Lang, H., Ofner, G. & Rainer, S., 2012, In : IEEE Transactions on Industrial Electronics. 59, 5, p. 2248-2257

Research output: Contribution to journalArticleResearchpeer-review

Validation of measurements with conjugate heat transfer models

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2012, International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. ., p. 31-36

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

A Finite Element Based Circuit Model Approach for Skewed Electrical Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2013.

Research output: Contribution to conferencePosterResearch

An Extended Finite Element-Based Circuit Model Approach for PMSM including Rotor Eccentricity

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 10 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characteristics of the Convective Heat Transfer Coefficient at the End Winding of a Hydro Generator

Klomberg, S., Farnleitner, E., Kastner, G. & Biro, O., 2013, Proceedings of the ASME 2013 Power Conference. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of a new simulation tool for computation of the synchronous generator end-winding deformations

Lang, H., Stermecki, A. & Biro, O., 10 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evaluation of interlaminar eddy currents in induction machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 10 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evaluation of Interlaminar Eddy Currents in Induction Machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2013, (Accepted/In press) IECON - Annual Conference of the IEEE Industrial Electronics Society. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimental investigation of the vibration behaviour of a laminated stack with winding

Weilharter, B., Mair, M., Lang, H., Ellermann, K. & Biro, O., 2013, IECON 2013 - 39th Annual Conference of the IEEE. IEEE Industrial Electronics Society, p. 2816-2820

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Finite Element Analysis of Three-Phase Three-Limb Power Transformers under DC

Biro, O., Koczka, G., Leber, G., Preis, K. & Wagner, B., 2013, (Accepted/In press) Technical Program of the 19th Conference on the Computation of Electromagnetic Fields. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Finite Element Analysis of Three-Phase Three-Limb Power Transformers under DC Bias

Biro, O., Koczka, G., Leber, G., Preis, K. & Wagner, B., 2013.

Research output: Contribution to conferencePosterResearch

Finite Element Based Circuit Model Approach for Skewed Electrical Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2013, (Accepted/In press) Conference on the Computation of Electromagnetic Fields. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Frequency Domain Decomposition of 3-D Eddy Current Problems in Steel

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 4 Jul 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Frequency Domain Decomposition of 3-D Eddy Current Problems in Steel Laminations of Induction Machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2013, (Accepted/In press) Conference on the Computation of Electromagnetic Fields. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical and experimental investigation of the structural characteristics of stator core stacks

Mair, M., Weilharter, B., Rainer, S., Ellermann, K. & Biro, O., 2013, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1643-1664

Research output: Contribution to journalArticleResearchpeer-review

Numerical Simulation of Electromagnetic Phenomena in the End-Winding Region of a Synchronous Generator

Riegler, S., Stermecki, A. & Biro, O., 21 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Parameter identification of a finite element based model of wound rotor induction machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2013, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1665-1678

Research output: Contribution to journalArticleResearchpeer-review

Three-Dimensional Eddy-Current Analysis in Steel Laminations of Electrical Machines as a Contribution for Improved Iron Loss Modeling

Handgruber, P., Stermecki, A., Biro, O., Belahcen, A. & Dlala, E., 2013, In : IEEE Transactions on Industry Applications. 49, 5, p. 2044-2052

Research output: Contribution to journalArticleResearchpeer-review

Three-Dimensional Eddy Current Loss Modeling in Steel Laminations of Skewed Induction Machines

Handgruber, P., Stermecki, A., Biro, O. & Ofner, G., 2013, In : IEEE Transactions on Magnetics. 49, 5, p. 2033-2036

Research output: Contribution to journalArticleResearchpeer-review

Transient electromagnetic field, losses and forces in a synchronous turbogenerator rotor

Pantelyat, M., Biro, O. & Stermecki, A., 2013, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 3, p. 794-808

Research output: Contribution to journalArticleResearchpeer-review

Validation of Finite Element Solutions of Nonlinear, Periodic Eddy-Current Problems

Plasser, R. & Biro, O., 21 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Validation of finite element solutions of nonlinear, peroiodic eddy current problems

Plasser, R. & Biro, O., 2013, International PhD & DLA Symposium. ., p. 125-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Validation of Measurements with Conjugate Heat Transfer Models

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2013, In : COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering. 32, 5, p. 1707-1720

Research output: Contribution to journalArticleResearchpeer-review

Validation of Numerical Approaches for Simulating the Heat Transfer in Stator

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2013, (Accepted/In press) Technical Program of the 19th Conference on the Computation of Electromagnetic Fields. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Validation of Numerical Approaches for Simulating the Heat Transfer in Stator Ducts with Measurements

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2013, (Accepted/In press) Conference on the Computation of Electromagnetic Fields. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Validation of Numerical Approaches for Simulating the Heat Transfer in Stator Ducts with Measurements

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2013.

Research output: Contribution to conferencePosterResearch

2014

A Finite Element Based Circuit Model Approach for Skewed Electrical Machines

Mohr, M., Biro, O., Stermecki, A. & Diwoky, F., 2014, In : IEEE Transactions on Magnetics. 50, 2, 7020704 .

Research output: Contribution to journalArticleResearchpeer-review

Analysis of Temperature Distribution in the Stator of Large Synchronous Machines Considering Heat Conduction and Heat Convection

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2014, In : IEEE Transactions on Magnetics. 51, 3, 8101304.

Research output: Contribution to journalArticleResearchpeer-review

Anisotropic Generalization of Vector Preisach Hysteresis Models for Non-Oriented Steels

Handgruber, P., Stermecki, A., Biro, O., Gorican, V., Dlala, E. & Ofner, G., 28 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Anisotropic Generalization of Vector Preisach Hysteresis Models for Non-Oriented Steels

Handgruber, P., Stermecki, A., Biro, O., Gorican, V., Dlala, E. & Ofner, G., 2014, (Accepted/In press) Biennial IEEE Conference on Electromagnetic Field Computation. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

An Iterative Domain Decomposition Method for Solving Wave Propagation Problems

Koczka, G., Bauernfeind, T., Preis, K. & Biro, O., 2014, In : Electromagnetics. 34, 3-4, p. 210-221

Research output: Contribution to journalArticleResearchpeer-review

A Transient Current Vector Potential to Consider the Rotor Excitation of Synchronous Machines Under Short Circuit Condition

Wallinger, G., Biro, O. & Rieg, S., 2014.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File

A Transient Current Vector Potential to Consider the Rotor Excitation of Synchronous Machines Under Short Circuit Condition

Wallinger, G., Biro, O. & Riegler, S., 2014, (Accepted/In press) Biennial IEEE Conference on Electromagnetic Field Computation. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characteristics of the Convective Heat Transfer Coefficient at the End Winding of a Hydro Generator

Klomberg, S., Farnleitner, E., Kastner, G. & Biro, O., 2014, In : Journal of thermal science and engineering applications. 7, 1, p. 1-8

Research output: Contribution to journalArticleResearchpeer-review

Characterizing the convective heat transfer on stator ventilation ducts for large hydro generators with a neural network

Schrittwieser, M., Biro, O., Farnleitner, E. & Kastner, G., 2014, (Accepted/In press) International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of CFD Analyzing Strategies for Hydro Generators

Klomberg, S., Farnleitner, E., Kastner, G. & Biro, O., 2014, International Conference on Electrical Machines. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of various methods for the finite element analysis of nonlinear, periodic eddy-current problems

Plasser, R., Takahashi, Y. & Biro, O., 2014.

Research output: Contribution to conferencePosterResearch

Comparison of various methods for the finite element analysis of nonlinear, periodic eddy-current problems

Plasser, R., Takahashi, Y. & Biro, O., 2014, International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. ., p. 55-55

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review