Norbert Enzinger

Assoc.Prof. Dipl.-Ing. Dr.techn.

1995 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1998 2019

Filter
Conference contribution
1998

Modelling of Residual Stresses in a Circumferential Butt Joint

Enzinger, N., Cerjak, H-H. & Engelhard, G., 1998, The 5th International Conference on Residual Stresses, Vol. 1. ., p. 418-423

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the Development of Residual Stresses in a Circumferential Butt Joint

Enzinger, N. & Cerjak, H-H., 1998, Mathematical Modelling of Weld Phenomena. London: IOM, p. 669-678

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Development of Residual Stresses due to Welding

Enzinger, N., 1998, Proc. of the 5th Int. Conf. on "Trends in Welding Research". Ohio: ASM International, p. 937-942

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2001

Berechnung von Schweißeigenspannungen

Enzinger, N., 2001, Tagungsband zur 7. Werkstofftagung. Graz: ., p. 147-156

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2002

A Modified Hot Tearing Criterion for Steels

Rindler, W., Kozeschnik, E., Enzinger, N. & Buchmayr, B., 2002, 10th International MAGMAsoft User Group Meeting. ., p. 13-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Modified Hot Tearing Criterion for Steels

Rindler, W., Enzinger, N., Kozeschnik, E. & Buchmayr, B., 2002, Mathematical Modelling of Weld Phenomena. London: IOM, p. 819-835

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Calculation of the Influence of the Weld Pattern on the final Residual Stress State

Enzinger, N. & Cerjak, H-H., 2002, Proc. of the 6th European Conference on Residual Stresses. Dias, A. M. (ed.). Zuerich: ttp, p. 147-152

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling Welding Residual Stresses with a Commercial multi-purpose FE program

Enzinger, N., 2002, Mathematical Modelling of Weld Phenomena. London: Maney Publishing, p. 519-537

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Vorhersage und Beherrschung von Schweißeigenspannungen mit Hilfe der Simulation

Enzinger, N., 2002, Tagungsband der Int. Schweiß- und Fertigungstechnischen Tagung. ., p. 1-21

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2003

Berechnung von Schweißeigenspannungen mit Hilfe der Finiten Elemente

Enzinger, N., 2003, Tagungsband zur 8. Werkstofftagung. ., p. 109-118

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Influence of Weld Pattern on the Welding Residual Stresses

Enzinger, N. & Cerjak, H-H., 2003, Trends in Welding Research. David, S. A. (ed.). Materials Park, Ohio: ASM International, p. 850-854

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2004

Modelling of Residual Stresses and Distortions by adapting a multipurpose Finite Element Program

Enzinger, N., 2004, MPC/PVRC Workshop on Residual Stresses. ., p. 191-219

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of Residual Stresses and Distortions due to local Heat Input

Enzinger, N., 2004, Computational Modeling and Simulation of Materials - Part B. Faenza: Techna Group Srl, Vol. 43. p. 611-618 (Advances in Science and Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

Activities in the field of joining at TU Graz

Cerjak, H-H., Enzinger, N., Kozeschnik, E., Holzer, I., Ghanimi, Y., Vallant, R., Baumgartner, S. & Mayr, P., 2005, Frontiers of Welding and Joining. Peking: ., p. 37-58

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Results of Stress Corrosion Investigation on Steel and Weldments on Steels S890 and S690

Dorsch, T., Saarinen, K., Roos, E., Böllinghaus, T., Cerjak, H-H. & Enzinger, N., 2005, High Strength Steels for Hydropower Plants. Graz: Verlag der Technischen Universität Graz, p. 4-1-4-49

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Steel S890 for pressurised shaft CD: Review of the Metallurgical Investigations

Cerjak, H-H., Dimmler, G. & Enzinger, N., 2005, High Strength Steels for Hydropower Plants. Graz: Verlag der Technischen Universität Graz

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2006

Aspects of Welding High Strength Steels

Cerjak, H-H. & Enzinger, N., 2006, International Conference on Advanced Structural Steels. ., p. 697-703

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Friction Stir Welding - ein innovatives Fügeverfahren

Weinberger, T. & Enzinger, N., 2006, JOIN-EX 2006 Internationaler Fachkongress der Schweiß- und Verbindungstechnik. Wien: ., p. 13.1-13.11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

High Strength Steels in Hydropower Plants: Consequences learned from the Cleuson-Dixence project

Cerjak, H-H. & Enzinger, N., 2006, Worldwide use of Hydropower in the future. Wien: ., p. 27-38

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

FINITE ELEMENT ANALYSIS OF MATERIAL FLOW PATTERNS IN FRICTION STIR SPOT WELDING OF AL 6082-T6 USING DIFFERENT PROCESS PARAMETERS AND TOOL GEOMETRIES

Khosa, S. U., Weinberger, T. & Enzinger, N., 2007, Proceedings HEFAT 2007. ., p. 1-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of welding parameters on microstructure and mechanical properties of friction stir spot welds between Al5754 and Steel HX 340LAD

Weinberger, T., Figner, G., Schröttner, H., Enzinger, N., Vallant, R. & Pasic, H., 2007, Conference Proceedings "Friction Based Processes". ., p. 5-40

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Material Flow Investigations during FSSW of Al6082-T6 by FEA and Experimental using different Tool Geometries

Khosa, S. U., Weinberger, T. & Enzinger, N., 2007, Conference Proceedings. ., p. 16-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Analysis of tool wear and failure mechanism during friction stir welding of steel

Weinberger, T., Khosa, S. U., Führer, B. & Enzinger, N., 2008, (Accepted/In press) Conference Proceedings 7th International Symposium ‘Friction Stir Welding’. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Basic Information for a reliable judgment of old hydropower plants

Enzinger, N., Heber, S-J., Cerjak, H-H., Gubeljak, N., Predan, J. & Mayrhuber, J., 2008, Wasserkraftanlagen im Zeichen des Klimawandels. Wien: Technische Universität Wien, p. 39-45

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Considerations for welding modern high strength steel

Enzinger, N., 2008, abstract book of 5th Congress of the Society of Metallurgists of Macedonia. Skopje: ., p. 25-26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Effect of energy input rate on the deformation behaviour of AL 6082-T6 matrix during friction stir spot welding

Khosa, S. U., Weinberger, T. & Enzinger, N., 2008, (Accepted/In press) Conference Proceedings. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of plastic anisotropy on the mechanical behavior of clinched joint of different coated thin steel sheets

Saberi, S., Enzinger, N., Vallant, R., Cerjak, H-H., Hinterdorfer, J. & Rauch, R., 2008, (Accepted/In press) ESAFORM Conference on Material Forming. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of Thermomechanical Response of Workpiece during Friction Stir Spot Welding (FSSW)

Khosa, S. U., Weinberger, T. & Enzinger, N., 2008, 3rd FSW Modelling and Flow Visualisation Seminar. ., p. 97-102

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Lessons learned from a failure case in a hydropower pressurized shaft with respect to high strength steels

Cerjak, H-H. & Enzinger, N., 2008, IIW International Congress 2008. Kolkata: ., p. I003-I003

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mathematical Modeling of Friction Stir Welding

Khosa, S. U., Weinberger, T. & Enzinger, N., 2008, Verarbeitungs- und Gebrauchseigenschaften von Werkstoffen - Heute und Morgen. Graz: Verlag der Technischen Universität Graz, p. 103-105

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Optical 2D Displacement and Strain Sensor for Creep Testing of Material Samples in Transparent Fluids

Brandner, M., Thurner, T., Kukutschki, G. & Enzinger, N., 2008, (Accepted/In press) IEEE Instrumentation and Measurement Technology Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Structural Integrity Assessment of Watergas Weld Shaft

Gubeljak, N., Heber, S-J., Enzinger, N., Predan, J., Mayrhuber, J., Tisma, Z. & Cerjak, H-H., 2008, Safety and Reliability of Welded Components in Energy nad Processing Industry. Graz: Verlag der Technischen Universität Graz, p. 539-543

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Untersuchung neuartiger Werkzeugkonzepte für das Rührreibschweißen von AW-6063T6

Weinberger, T., Enzinger, N. & Cerjak, H-H., 2008, Tagungsband "Forum für Metallurgie und Werkstofftechnik 2008". ., p. 24-27

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2009

A Prominent Failure Case in Welding High Strength Steel: Hydropower Plant Cleuson-Dixence

Cerjak, H-H. & Enzinger, N., 2009, Innovative Technologies for Joining Advanced Materials. Timisoara: Sudura, p. 26-31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Evolution of Microstructure and Properties for Friction Stir Welded Martensitic Precipitation-Hardening Steels

Weinberger, T., Führer, B., Khosa, S. U., Enzinger, N., Cerjak, H-H., Schröttner, H. & Mitsche, S., 2009, Proceedings: 8th International Conference on Trends in Welding Research Conference. ., p. 398-402

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modification of coupling parameters for a more accurate cumerically coupled simulation of the resistance spot welding process

Ernst, W., Galler, M., Vallant, R. & Enzinger, N., 2009, SYSWELD Forum. ., p. 143-156

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Numerical Modeling of Innovative Joining Processes

Enzinger, N. & Sommitsch, C., 2009, Proceedings of the paper and poster abstract of the first IIW International Congress in Central and East European Region. ., p. 37-37

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Qualification Program for the Rehabilitation of Cleuson-Dixence: Requirements and Results

Cerjak, H-H., Chene, O., Enzinger, N. & Roos, E., 2009, Pre-prints of the Papers Conference High Strength Steels for Hydropower Plants. Takasaki: ., p. 2.1-2.6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Tool development for different spot welding processes for automotive applications

Figner, G., Weinberger, T., Galler, M., Kolbeck, C. & Enzinger, N., 2009, Advances in Welding and Joining. ., p. 17-23

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Welding of High Strength Steel in Hydropowre Applications - The Cleuson Dixence Case

Enzinger, N. & Cerjak, H-H., 2009, Proceedings: 8th International Conference on Trends in Welding Research Conference. ., p. 575-580

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

A Novel Approach for Modelling of Friction Stir Spot Welding Process Considering Deformable Tool

Khosa, S. U., Weinberger, T. & Enzinger, N., 2010, Mathematical Modelling of Weld Phenomena 9. Graz: Verlag der Technischen Universität Graz, p. 319-356

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of different welding processes for steel-alumina joining in hybrid car body construction

Pasic, H., Pudar, M., Figner, G., Bruckner, J., Ivanova, J., Liedl, G. & Enzinger, N., 2010, Proceedings of the International Conference on Advances in Welding Science & Technology for Construction, Energy & Transportation. ., p. 381-387

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of different welding processes in the joining of steel to aluminium in car body production, using the example of a complex car body part

Pudar, M., Pasic, H., Weirather, T., Figner, G., Enzinger, N., Ivanova, J., Bruckner, J., Liedl, G. & Hampel, S., 2010, Materials in car body engieneering 2010. Hannover: Vincentz Network GmbH, p. ?-?

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Aspects on the Joinability for Advanced Designs

Cerjak, H-H. & Enzinger, N., 2010, Innovative Technologies for Joining Advanced Materials. SUDURA Publishing House, p. 40-57

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Der Schadensfall Cleuson-Dixence - Schadensuntersuchungen und Qualifikationsprogramm für die Wiederherstellung

Cerjak, H-H. & Enzinger, N., 2010, Schweißtagung Böhler Welding Group Schweiz AG. ., p. 13.1-13.31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Friction Stir Welding von Faserverstärkten Kunststoffen

Wachtler, C., Figner, G. & Enzinger, N., 2010, Internationaler Fachkongress der Schweiss- und Verbindungstechnik. Wien: ., p. 14/1-14/12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

INFLUENCING WELDING RESIDUAL STRESSES OF HSS BY MECHANICAL POST WELD TREATMENTS

Rahman, M. M., Hütter, A., Enzinger, N. & Sommitsch, C., 2010, (Accepted/In press) IDDRG Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influencing Welding Residual Stresses of HSS by Pneumatic Impact Treatment (PIT)

Rahman, M. M., Hütter, A. & Enzinger, N., 2010, Mathematical Modelling of Weld Phenomena 9. Graz: Verlag der Technischen Universität Graz, p. 863-882

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical and Experimental Investigation of Mechanical Behavior of Clinching Joints under Quasi-Static and Cylclic Loading in Comparison to Resistance Spot and Friction Stir Spot Welded Joints

Saberi, S., Ernst, W., Vallant, R. & Enzinger, N., 2010, Mathematical Modelling of Weld Phenomena 9. Graz: Verlag der Technischen Universität Graz, p. 715-725

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulation based determination of the electrical contact resistance during resistance spot welding

Galler, M., Ernst, W., Vallant, R. & Enzinger, N., 2010, (Accepted/In press) Mathematical Modelling of Weld Phenomena 9. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File