Norbert Enzinger

Assoc.Prof. Dipl.-Ing. Dr.techn.

1995 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1998 2019

Filter
Conference contribution
2019

Investigation of the influence of the welding speed and current on the parameters of the adaptive function

Nasiri, M. B. & Enzinger, N., 2019, Mathematical Modelling of Weld Phenomena 12. Graz: Verlag der Technischen Universität Graz, p. 1-20

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
Welding
Welds
Experimental Data
Finite element method
Stainless Steel
2017

Auswirkungen einer falschen Spannungsarmglühung beim Schweißen höchstfester Stähle

Enzinger, N. & Cerjak, H-H., 18 Oct 2017, Schadensanalyse 2017: Schäden an geschweißten Bauteilen. p. 211-221

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Electron beam welding of TZM sheets

Stütz, M., Oliveira, D., Rüttinger, M., Reheis, N., Kestler, H. & Enzinger, N., 2017, THERMEC 2016. Trans Tech Publications Ltd., Vol. 879. p. 1865-1869 5 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

electron beam welding
Electron beam welding
Welds
Welding
Fusion reactions

Influence of Nickel on the Properties of P91 Flux Cored Wire Weld Metal

Baumgartner, S., Holy, A., Schuler, M., Schnitzer, R. & Enzinger, N., 14 Nov 2017, Frontiers in Materials Processing, Applications, Research and Technology: Select Proceedings of FiMPART 2015. Muruganant, M., Chirazi, A. & Raj, B. (eds.). Singapore, p. 349-358 30

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Rotary Friction Welding of Molybdenum Components

Stütz, M., Pixner, F., Wagner, J., Reheis, N., Raiser, E., Kestler, H. & Enzinger, N., 29 May 2017, Proceedings of the 19th Plansee Seminar. 1 p. RM 70

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Systematic investigation of the temperature field in atmospheric plasma processing (APP)

Stummer, M., Stögmüller, P., Eichinger, T. & Enzinger, N., 2017, THERMEC 2016. Trans Tech Publications Ltd., Vol. 879. p. 1870-1875 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Plasma applications
Temperature distribution
Plasmas
Surface treatment
Thermocouples

Temperature field evolution during flash butt welding of railway rails

Weingrill, L., Krutzler, J. & Enzinger, N., 2017, THERMEC 2016. Trans Tech Publications Ltd., Vol. 879. p. 2088-2093 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Flash welding
Butt welding
rails
welding
flash
2016

Additive Manufacturing via Cold Metal Transfer

Stockinger, J., Wiednig, C. A., Enzinger, N., Sommitsch, C., Huber, D. & Stockinger, M., 24 Nov 2016, Metal Additive Manufacturing Conference: Industrial perspective in Additive Technologies. Linz, p. 117-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Basic Characterisation of 17-4PH structure manufactured by Selective Laser Melting

Brillinger, M., Haas, F., Enzinger, N. & Pfanner, S., 25 Nov 2016, Industrial perspectives in Additive Technologies. p. 157-162 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Effect of Friction Stir Welding on Microstructure and Properties of Micro-TiO_2 doped HSLA Steel

Pouriamanesh, R., Dehghani, K., Hütter, A., Vallant, R., Enzinger, N. & Sommitsch, C., 2016, 41th CWS International conference Welding 2016. Opatija, p. 46-55

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Effect of RTE treatment on toughness of HSS weld metal

Cerjak, H-H., Enzinger, N., Caliskanoglu, O., Figner, G., Pudar, M., Mendez Martin, F. & Domankova, M., 10 Oct 2016, Proceedings 10th International Conference on Trends in Welding Research. Tokyo, p. 213-216 S11-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electron beam process for the production of model alloys

Sommitsch, C., Wiednig, C. A., Spenger, T., Enzinger, N., Hofer, F. & Simic, S., 2016, Beam Technologies & Laser Application. St. Petersburg: Publishing house SpbSPU, p. 75-81

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Numerische Simulation der Phasenumwandlungen bei Schienenschweißungen von perlitischem Stahl

Weingrill, L. A. & Enzinger, N., 9 Nov 2016, Schweißen und Wärmebehandlung: Simulationsforum 2016 Tagungsband. Hildebrand, D-I. J., Loose, D-I. T. & Reich, D-I. M. (eds.). Weimar: Verein zur Förderung der numerischen Analyse der Wärmebehandlungs- und Schweißprozesse e.V., p. 157 - 165 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Rotary Friction Welding of Large Molybdenum Tubes

Stütz, M., Wagner, J., Reheis, N., Raiser, E., Kestler, H. & Enzinger, N., 2016, Proceedings of the 10th International Conference on Trends in Welding Research. 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Toughness evaluation of EB welds

Wiednig, C. A. & Enzinger, N., 2016, Beam Technologies & Laser Application. St. Petersburg: Publishing house SpbSPU, p. 97-106

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2015

Sulphide stress corrosion cracking of 1.4418 welded plates

Orsi, A., Ghanimi, Y. & Enzinger, N., 2015, 8th European Stainless Steel & Duplex Stainless Steel Conference 2015. ., p. 357-366

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Versprödung von hochfestem Schweißgut beim Spannungsarmglühen

Cerjak, H-H., Caliskanoglu, O., Enzinger, N., Figner, G. & Pudar, M., 2015, DVS Congress 2015. Düsseldorf: ., p. 824-827

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Development, experiences and qualification of steel grades for hydropower conduits

Cerjak, H-H., Enzinger, N. & Pudar, M., 2014, 18. Internationales Seminar Wasserkraftanalgen - Innovation und Entwicklungsbedarf für eine nachhaltige Entwicklung der Wasserkraft. ., p. 139-150

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 2014, First International Conference on Structural Integrity.. ., p. 225-236

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Entwicklung eines dreidimensionalen Materialmodells für Faser-Kunststoff-Verbunde mit Hilfe simulationsbegleitender Festigkeitsuntersuchungen an Fließformschraubverbindungen CFK-Aluminium

Szlosarek, R., Karall, T., Hahne, C., Berger, A., Meyer, N. & Enzinger, N., 2014, VDI-Berichte 2224. ., p. 149-167

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

FRICTION WELDING OF TZM COMPONENTS

Reheis, N., Tabernig, B., Kestler, H., Sigl, L. S., de Pretis, D. & Enzinger, N., 2014, International Conference on Tungsten, Refractory & Hardmaterials. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of nickel on the mechanical properties of a creep resistant CB2 flux cored wire weld metal

Baumgartner, S., Schuler, M., Schnitzer, R. & Enzinger, N., 2014, 10th Liège Conference: Materials for Advanced Power Engineering 2014. Jülich: Forschungszentrum Jülich GmbH Zentralbibliothek, Verlag, Vol. 234. p. 171-179 (Schriften des Forschungszentrums Jülich Reihe Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Know-how and process development for components used in (A)USC power plants

Lochbichler, C., Füreder-Kitzmüller, F., Zeiler, G., Paul, S., Klarner, J., Vogl, T., Baumgartner, S., Schnitzer, R., Hanus, R., Schmitz-Niederau, M., Kreuzer-Zagar, D., Schrammhauser, S., Trenkmann, U., Schuler, M. & Enzinger, N., 2014, 10th Liège Conference: Materials for Advanced Power Engineering 2014. Jülich: Forschungszentrum Jülich GmbH Zentralbibliothek, Verlag, Vol. 234. p. 171-179 (Schriften des Forschungszentrums Jülich Reihe Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Metallographic investigation of a fatigue event on a hydropower penstock made from high strength steel

Cerjak, H-H., Enzinger, N., Stöfan, G. & Vallant, R., 2014, Sonderbände der Praktischen Metallographie - Forstschritte in der Metallographie. Bonn, Deutschland: Inventum GmbH, Vol. 46. p. 321-326

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Rührreibschweißen von Leichtmetallen und MMCs

Sommitsch, C., Hütter, A., Pakkanen, J., Poletti, M. C., Tändl, J., Krpic, B., Ramskogler, C. & Enzinger, N., 2014, Leichtmetalle - Prozesse - Anwendungen: Zukunftstechnologie als Basis für neue Mobilitätskonzepte. ., p. 164-178

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulation of microstructure and modelling of mechanical properties of CB2 flux cored wires weld metal

Schuler, M., Ramskogler, C., Baumgartner, S., Schnitzer, R. & Enzinger, N., 2014, 10th Liège Conference: Materials for Advanced Power Engineering 2014. Jülich: Forschungszentrum Jülich GmbH Zentralbibliothek, Verlag, Vol. 234. p. 189-198 (Schriften des Forschungszentrums Jülich, Reihe Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2013

Characterization of friction stir welded multilayered steel

Taendl, J., Enzinger, N., Nambu, S., Inoue, J. & Koseki, T., 31 Jul 2013, Trends in Welding Research - Proceedings of the 9th International Conference. p. 823-828 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Steel
Friction
Elongation
Welding
Welds

Development, Experiences and Qualification of Steel Grades for Hydro Power Conduits

Cerjak, H-H., Enzinger, N. & Pudar, M., 2013, High Strength Steels for Hydropower Plants Design Concepts - Pressure Conduits. Graz: Verlag der Technischen Universität Graz, p. 1-18

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Fließformschrauben von Aluminium & CFK - Charakterisierung einer Verbindungstechnik

Szlosarek, R., Karall, T., Enzinger, N., Hahne, C., Meyer, N. & Thibaud, C., 2013, Fortschritte in der Werkstoffprüfung für Forschung und Praxis. Stahleisen: ., p. 247-252

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Kerbschlagarbeit einer Reibschweißverbindung

Mucic, K., Fuchs, F. & Enzinger, N., 2013, Schweiss- und Prüftechnik. ., p. 41-44

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Lineares Reibschweißen von hochfesten Kettengliedern

Mucic, K., Fuchs, F. & Enzinger, N., 2013, 20. Erfahrungsaustausch Reibschweißen. ., p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the Modelling of Austenite Grain Growth in Micro-alloyed Steel S700MC

Rahman, M. M., Albu, M. & Enzinger, N., 2013, Mathematical Modelling of Weld Phenomena. Graz: Verlag der Technischen Universität Graz, p. 623-636

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Optimization of a heat source using ABC algorithm

Wittwer, L. & Enzinger, N., 2013, (Accepted/In press) Mathematical Modelling of Weld Phenomena. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Pressstumpfschweißsimulation mit realen Schweißparametern und experimentellen Vergleich

Kicin, M., Wagner, J., Rauch, R., Spachinger, S. & Enzinger, N., 2013, (Accepted/In press) Schweißen und Wärmebehandlung. Weimar: Bauhaus-Universität Weimar

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Qualification Procedure of Thermomechanical Steel ALFORM 700 for Pressure Shaft Lining of Reisseck II Pumped Storage HPP

Mayrhuber, J., Kirilowitsch, C., Cerjak, H-H. & Enzinger, N., 2013, High Strength Steels for Hydropower Plants Design Concepts - Pressure Conduits. Graz: Verlag der Technischen Universität Graz, p. 251-262

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Schweißen hochfester Stähle - Der Schadensfall Cleuson-Dixence

Enzinger, N. & Cerjak, H-H., 2013, Wasserstoff in metallischen Bauteilen. ., p. 1-29 (VDI Jahrestagung).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File
2012

Characterization of friction stir welded multilayered steel

Tändl, J., Nambu, S., Inoue, J., Enzinger, N. & Koseki, T., 2012, Proceedings of the 9th International Conference on Trends in Welding Research. ., p. 823-828

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

CORROSION AND MECHANICAL PROPERTIES OF WELDED ALUMINIUM AND MAGNESIUM ALLOYS FOR REFRIGERATION COMPRESSORS IN COMPARISON WITH DEEP-DRAWING STEEL

Kerschbaumer, K. G., Vallant, R., Enzinger, N. & Sommitsch, C., 2012, 20th JUBILEE CONFERENCE ON MATERIALS AND TECHNOLOGY. ., p. 129-129

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Das Korrosionsverhalten von MIG-geschweißten Aluminium-Blechen Al5083 und Al6181 im Neutral-Salzsprühnebeltest und die Auswirkung auf die Verbindungsfestigkeit

Kerschbaumer, K. G., Pölzleitner, D., Vallant, R. & Enzinger, N., 2012, DVS Congress 2012 Band 286. Düsseldorf: DVS Media GmbH, p. 37-46

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Das österreichische Kompetenznetzwerk für Fügetechnik K-Porjekt JOIN4+

Enzinger, N. & Sommitsch, C., 2012, Tagungsband 8. Chemnitzer Symposium Füge- und Schweißtechnik. Chemnitz: Universitätsverlag Chemnitz, p. 27-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Elektronenstrahlschweißen - Schlüsseltechnologie für High-End Anwendungen

Tändl, J., Beal, C., Enzinger, N. & Sommitsch, C., 2012, Internationaler Fachkongress der Schweiß- und Verbindungstechnik JOIN-EX. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influences on the arc stability in the welding process of aluminum pin-structures

Wittwer, L., Jank, N., Becirovic, A., Waldhör, A. & Enzinger, N., 2012, Proceedings of the 13th International Conference on Aluminum Alloys. Hoboken, New Jersey: Wiley, p. 795-800

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Linear Friction Welding of High Strength Chains

Mucic, K., Fuchs, F. & Enzinger, N., 2012, (Accepted/In press) Proceedings: 9th International Conference on Trends in Welding Research Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Linear friction welding of high strength chains: modelling and validation

Mucic, K., Lopera, J., Fuchs, F. & Enzinger, N., 2012, (Accepted/In press) Mathematical Modelling of Weld Phenomena 10. Graz: Verlag der Technischen Universität Graz, Vol. 10.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the modeling of austenite grain growth in microalloyed HS steel S700MC

Rahman, M. M. & Enzinger, N., 2012, (Accepted/In press) Microstructure modeling. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Process optimization for linear friction welding of high strength chains

Mucic, K., Fuchs, F. & Enzinger, N., 2012, EUROJOIN8. Zagreb: CIP, p. 157-166

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 2011, Proceedings of teh IWOTE'11: International Workshop on Thermal Forming and Welding Distortion. Bremen: BIAS Verlag, Vol. 41. p. 203-214 (Strahltechnik).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Friction stir welding of magnesium and steel in car body engineering

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 2011, Joining in Car Body Engineering 2011. ., p. 113-128

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Joining of Aluminum and Steel in Car Body Manufacturing

Liedl, G., Bielak, R., Ivanova, J., Enzinger, N., Figner, G., Bruckner, J., Pasic, H., Pudar, M. & Hampel, S., 2011, Lasers in Manufacturing 2011 - Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing. ., Vol. 12. p. 150-156 (Physics Procedia).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 2011, Erfahrungsausstausch Reibschweißen. ., p. 1-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch