Norbert Enzinger

Assoc.Prof. Dipl.-Ing. Dr.techn.

1995 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1998 2019

2011

JOIN4+

Enzinger, N. & Gollner, W., 2011, .

Research output: Book/ReportCommissioned reportResearch

Joining of Aluminum and Steel in Car Body Manufacturing

Liedl, G., Bielak, R., Ivanova, J., Enzinger, N., Figner, G., Bruckner, J., Pasic, H., Pudar, M. & Hampel, S., 2011, Lasers in Manufacturing 2011 - Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing. ., Vol. 12. p. 150-156 (Physics Procedia).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Lineares Reibschweißen von Kettengliedern

Mucic, K., Enzinger, N. & Fuchs, F., 2011.

Research output: Contribution to conferencePosterResearch

Loss of ductility caused by AlN precipitates in Hadfield steel

Radis, R., Schlacher, C., Mayr, P., Enzinger, N., Kozeschnik, E. & Sommitsch, C., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 1 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 2011, Erfahrungsausstausch Reibschweißen. ., p. 1-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Orbitalschweißen von Aluminiumrohren

Hütter, A., Lind, C. & Enzinger, N., 4 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Research Activities in the field of Joining in Austria

Enzinger, N. & Cerjak, H-H., 2011.

Research output: Contribution to conferencePaperResearch

Research Activities in the field of Joining in Austria

Enzinger, N. & Cerjak, H-H., 18 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulating the welding process of pin structures

Wittwer, L. & Enzinger, N., 2011, Tagungsband Sysweldforum 2011. ., p. 45-54

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Vibration stress relief treatment of welded high-strength martensitic steel

Djuric, D., Vallant, R., Kerschbaumer, K. G. & Enzinger, N., 2011, In : Welding in the world. 1, 1, p. 86-93

Research output: Contribution to journalArticleResearchpeer-review

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 2011, Tagungsskript Gefüge und Bruch. ., p. 207-217

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 30 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Werkstoffmodellierung und Prozesssimulation in der Schweißtechnik

Sommitsch, C. & Enzinger, N., 5 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2010

A Novel Approach for Modelling of Friction Stir Spot Welding Process Considering Deformable Tool

Khosa, S. U., Weinberger, T. & Enzinger, N., 2010, Mathematical Modelling of Weld Phenomena 9. Graz: Verlag der Technischen Universität Graz, p. 319-356

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of different welding processes for steel-alumina joining in hybrid car body construction

Pasic, H., Pudar, M., Figner, G., Bruckner, J., Ivanova, J., Liedl, G. & Enzinger, N., 2010, Proceedings of the International Conference on Advances in Welding Science & Technology for Construction, Energy & Transportation. ., p. 381-387

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of different welding processes for steel-alumina joining in hybrid car body construction

Pasic, H., Pudar, M., Figner, G., Bruckner, J., Ivanova, J., Liedl, G. & Enzinger, N., 15 Jul 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Application of different welding processes in the joining of steel to aluminium in car body production, using the example of a complex car body part

Pudar, M., Pasic, H., Weirather, T., Figner, G., Enzinger, N., Ivanova, J., Bruckner, J., Liedl, G. & Hampel, S., 2010, Materials in car body engieneering 2010. Hannover: Vincentz Network GmbH, p. ?-?

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Aspects on the Joinability for Advanced Designs

Cerjak, H-H. & Enzinger, N., 2010, Innovative Technologies for Joining Advanced Materials. SUDURA Publishing House, p. 40-57

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Der Schadensfall Cleuson-Dixence - Schadensuntersuchungen und Qualifikationsprogramm für die Wiederherstellung

Cerjak, H-H. & Enzinger, N., 4 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Der Schadensfall Cleuson-Dixence - Schadensuntersuchungen und Qualifikationsprogramm für die Wiederherstellung

Cerjak, H-H. & Enzinger, N., 2010, Schweißtagung Böhler Welding Group Schweiz AG. ., p. 13.1-13.31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Ermittlung von angemessenen Vorwärmtemperaturen beim Schweißen von ferritisch/bainitischen TM-Stählen

Kapl, S., Rauch, R., Suleiman, S., Vallant, R. & Enzinger, N., 2010.

Research output: Contribution to conferencePosterResearch

Ermittlung von diffusiblem Wasserstoff in hochfestem Schweißgut

Kapl, S., Zwettler, F., Rauch, R., Duchaczek, H., Enzinger, N. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Friction Stir Welding von Faserverstärkten Kunststoffen

Wachtler, C., Figner, G. & Enzinger, N., 14 Oct 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction Stir Welding von Faserverstärkten Kunststoffen

Wachtler, C., Figner, G. & Enzinger, N., 2010, Internationaler Fachkongress der Schweiss- und Verbindungstechnik. Wien: ., p. 14/1-14/12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

INFLUENCE OF THE SOFT ZONE ON THE STRENGTH OF WELDED MODERN HSLA STEELS

Franz, H., Vallant, R. & Enzinger, N., 17 Mar 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

INFLUENCE OF THE SOFT ZONE ON THE STRENGTH OF WELDED MODERN HSLA STEELS

Hochhauser, F., Ernst, W., Rauch, R., Vallant, R. & Enzinger, N., 10 Jul 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

INFLUENCING WELDING RESIDUAL STRESSES OF HSS BY MECHANICAL POST WELD TREATMENTS

Rahman, M. M., Hütter, A., Enzinger, N. & Sommitsch, C., 2010, (Accepted/In press) IDDRG Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influencing Welding Residual Stresses of HSS by Pneumatic Impact Treatment (PIT)

Rahman, M. M., Hütter, A. & Enzinger, N., 2010, Mathematical Modelling of Weld Phenomena 9. Graz: Verlag der Technischen Universität Graz, p. 863-882

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical and Experimental Investigation of Mechanical Behavior of Clinching Joints under Quasi-Static and Cylclic Loading in Comparison to Resistance Spot and Friction Stir Spot Welded Joints

Saberi, S., Ernst, W., Vallant, R. & Enzinger, N., 2010, Mathematical Modelling of Weld Phenomena 9. Graz: Verlag der Technischen Universität Graz, p. 715-725

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulation based determination of the electrical contact resistance during resistance spot welding

Galler, M., Ernst, W., Vallant, R. & Enzinger, N., 2010, (Accepted/In press) Mathematical Modelling of Weld Phenomena 9. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Thermo-Mechanical Investigations during Friction Stir Spot Welding (FSSW) of AA6082-T6

Khosa, S. U., Weinberger, T. & Enzinger, N., 2010, In : Welding in the world. 54, 5/6, p. R134-R146

Research output: Contribution to journalArticleResearchpeer-review

Verbinden von Li-Ionen Zellen für Automotive Batteriepakete

Mucic, K., Pudar, M., Enzinger, N., Vallant, R., Pasic, H. & Trummer, W., 2010, Internationaler Fachkongress der Schweiß- und Verbindungstechnik. Wien: ., p. 13/1-13/13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2009

3D Coupled Thermo-Mechanical Model for Plunge Phase during Friction Stir Welding Process

Khosa, S. U., Weinberger, T. & Enzinger, N., 10 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A new method for measuring the electrical contact resistance during resistance spot welding

Galler, M., Ernst, W., Vallant, R. & Enzinger, N., 28 Sep 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

A new method for measuring the electrical contact resistance during resistance spot welding

Galler, M., Enzinger, N., Vallant, R. & Ernst, W., 2009, (Accepted/In press) Mathematical Modelling of Weld Phenomena. .

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Open Access
File

A novel approach for 3D-Modelling of Friction Stir Spot Welding process considering a deformable tool

Khosa, S. U., Weinberger, T. & Enzinger, N., 29 Sep 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A Prominent Failure Case in Welding High Strength Steel: Hydropower Plant Cleuson-Dixence

Cerjak, H-H. & Enzinger, N., 2009, Innovative Technologies for Joining Advanced Materials. Timisoara: Sudura, p. 26-31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A Prominent Failure Case in Welding of High Strength Steel: Hydropower Plant Cleuson-Dixence

Cerjak, H-H. & Enzinger, N., 11 Jun 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Einfluss von Lagenaufbau und Nahtnachbehandlung auf die dynamische Festigkeit beim Schweißen hochfester Feinkornbaustähle

Schörghuber, M., Staufer, M., Enzinger, N., Wichart, K., Rahman, M. M., Hütter, A., Franz, M., Wagner, J., Rauch, R., Tischler, G., Jöbstl, H., Steinbauer, R., Michalka, M., Kubeczko, H., Kettner, H., Mitterhuber, S., Gerster, P., Jank, N., Winkler, F. & Strauss, C., 2009, In : Schweiss- & Prüftechnik. Sonderband, p. 22-24

Research output: Contribution to journalArticleResearch

Einsatz unterschiedlicher Schweißverfahren zum Verbinden von Stahl mit Aluminium im Karosseriebau

Pasic, H., Pudar, M., Enzinger, N., Ivanova, J., Bruckner, J., Hampel, S., Liedl, G., Karner, W., Figner, G., Weirather, T. & Leitner, A., 2009, In : Schweiss- & Prüftechnik. Sonderband, p. 25-27

Research output: Contribution to journalArticleResearch

Einsatz von Bimetallen für Hybridverbindungen

Wichart, K., Ivanova, J., Bruckner, J., Enzinger, N., Figner, G., Liedl, G., Basalka, H. & Leitner, A., 2009, In : Schweiss- & Prüftechnik. Sonderband, p. 28-31

Research output: Contribution to journalArticleResearch

Evolution of Microstructure and Properties for Friction Stir Welded Martensitic Precipitation-Hardening Steels

Weinberger, T., Führer, B., Khosa, S. U., Enzinger, N., Cerjak, H-H., Schröttner, H. & Mitsche, S., 2009, Proceedings: 8th International Conference on Trends in Welding Research Conference. ., p. 398-402

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

FE BASED TRANSIENT MODEL FOR SENSITIVITY ANALYSIS OF SYSTEM AND PROCESS PARAMETERS DURING PLUNGE PHASE OF FRICTION STIR WELDING

Khosa, S. U., Weinberger, T. & Enzinger, N., 9 Sep 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fortschritte bei der Werkzeugentwicklung für das Rührreibschweißen (FSW) und Rührreibpunktschweißen (FSSW) von Stahl

Weinberger, T., Figner, G., Enzinger, N., Cerjak, H-H. & Kolbeck, C., 1 Apr 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fortschritte in der Fügetechnik

Cerjak, H-H., Enzinger, N., Gollner, W., Hackl, H. & Wichart, K., 1 Dec 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction Stir Spot Welds between Aluminium and Steel automotive sheets: Influence of welding parameters on mechanical properties and microstructure

Figner, G., Vallant, R., Weinberger, T., Schröttner, H., Pasic, H. & Enzinger, N., 2009, In : Welding in the world. 53, 1/2, p. R13-R23

Research output: Contribution to journalArticleResearchpeer-review

Friction stir welding in automotive industry – recent developments and viable applications

Weinberger, T., Figner, G., Enzinger, N., Cerjak, H-H. & Kolbeck, C., 13 Jul 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch