20042024
If you made any changes in Pure these will be visible here soon.

Research Output 2004 2019

Filter
Conference contribution

Al-Mg-Sc Stringer: Von der Grundlagenuntersuchung zum Prototypen

Tändl, J., Anders, K., Janisch, S. D., Kerstan, H., Palm, F., Entelmann, W. & Poletti, M. C., 9 Nov 2016, 9. Ranshofner Leichtmetalltage: Strategien für nachhaltige Entwicklungen im Leichtbau. p. 22-36

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Analytical Electron Tomographic Invesigations Revealing Self Stabilization of Core-Shell Precipitates through Opposing Diffusion Processes

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C., Sonderegger, B. & Kothleitner, G., 2016, 6th ASEM-Workshop: Advanced Electron Microscopy. Leoben, p. 8 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Analytical Electron Tomographic Investigation of an Aluminium Alloy with Nano-Precipitates

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 2015, ASEM Workshop Advanced Electron Microscopy. ., p. 39-39

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterization of electron beam and friction stir welds in a novel Al-Mg-Sc-Zr alloy

Tändl, J. & Poletti, M. C., 11 Oct 2016, Proceedings of the 10th International Conference on Trends in Welding Research. p. 313-316

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Comparison of microstructural changes in three different Ni-base superalloys after cyclic thermo-mechanical treatment

Huber, D., Hacksteiner, M., Poletti, M. C., Warchomicka, F. & Stockinger, M., 2014, 8th International Symposium on Superalloy 718 and Derivatives 2014. John Wiley & Sons, Inc, p. 303-315 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermomechanical treatment
Superalloys
Compressive stress
Software packages
Kinetics

Determination of the mechanism of restoration in subtransus hot deformation of Ti-6Al-4V

Warchomicka, F., Poletti, M. C., Stockinger, M. & Degischer, H. P., 2011, (Accepted/In press) THERMEC' 2011. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamic phase evolution in titanium alloy Ti-6A1-4V

Homporová, P., Poletti, M. C., Stockinger, M. & Warchomicka, F., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 737-740 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Titanium alloys
Heat treatment
Metallography
Phase transitions
Cooling

Dynamic phase evolution in titanium alloy Ti-6Al-4V

Homporova, P., Poletti, M. C., Stockinger, M. & Warchomicka, F., 2011, (Accepted/In press) The 12th World Conference on Titanium. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Flow instabilities during hot deformation of titanium alloys and titanium matrix composites

Poletti, M. C., Halici, D. & Xue, S., 2015, (Accepted/In press) TMS Proceeding. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hot deformation behaviour of low alloyed steel

Poletti, M. C., Ilie, S., Großeiber, S. & Degischer, H. P., 2011, (Accepted/In press) THERMEC' 2011. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Hot deformation studies of creep resistant Mg alloy

Dikovits, M., Poletti, M. C., Dieringa, H. & Mitsche, S., 2013, Magnesium; Aluminium; Titanium Science and Technology. ., p. 100-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hot deformation study by processing maps of N containing microalloyed steel

Dikovits, M., Poletti, M. C., Warchomicka, F., Chaudhari, G. P. & Pancholi, V., 2012, TMS Annual Meeting. John Wiley & Sons, Inc, p. 503-510 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hot working
Steel
steels
Processing
strain rate

Investigation of pre-existing pores in creep loaded 9Cr steel

Yadav, S. D., Rosc, J., Sartory, B., Brunner, R., Sonderegger, B., Sommitsch, C. & Poletti, M. C., 2014, 3DMS 2014 - Proceedings of the 2nd International Congress on 3D Materials Science. Hoboken, NJ, USA: John Wiley & Sons, Inc, p. 85-90 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Steel
Creep
Cavitation
Tomography
Agglomeration

Investigation of the non-equilibrium formation of stoichiometric precipitates in multi-component aluminium alloys

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C., Sonderegger, B. & Kothleitner, G., 2017, ASEM. p. 50

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Microstructural characterization of hot deformed Ti-6A1-4V

Warchomicka, F., Poletti, M. C. & Stockinger, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 729-732 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Strain rate
Microstructure
Restoration
Dynamic recrystallization
Hot working

Microstructural characterization of hot deformed Ti-6Al-4V

Warchomicka, F., Poletti, M. C. & Stockinger, M., 2011, (Accepted/In press) The 12th World Conference on Titanium. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure and Strength Evolution in G-AlSi7Cu0.5Mg According to Different Heat Treatment Parameters

Krumphals, F., Poletti, M. C., Albu, M., STAUDER, B., Radis, R. & Sommitsch, C., 2012, MMM 2012 -6th International Conference on Multiscale Materials Modeling. ., p. 5-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure evolution of ti-5al-5v-5mo-3cr after hot deformation at large and moderate strains

Poletti, M. C., Buzolin, R., Kumar, S., Wang, P. & Simonet-Fotso, T. F. J., 1 Jan 2018, THERMEC 2018. Shabadi, R., Chandra, T., Jeandin, M., Ionescu, M. & Richard, C. (eds.). Trans Tech Publications Ltd., p. 1443-1449 7 p. (Materials Science Forum; vol. 941 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hot working
microstructure
Microstructure
Dynamic recrystallization
Microstructural evolution

Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

Halici, D., Prodinger, D., Poletti, M. C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Advanced Materials Research. Trans Tech Publications Ltd., Vol. 783-786. p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

hot working
Hot working
titanium alloys
Titanium alloys
damage

Physical based creep strain modelling of 9%Cr martensitic steel

Yadav, S. D., Schuler, M., Sommitsch, C. & Poletti, M. C., 2014, (Accepted/In press) ECCC International Conference on Creep and Fracture in High Temperature Components: Design & Life Assessment Issues. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Rührreibschweißen von Leichtmetallen und MMCs

Sommitsch, C., Hütter, A., Pakkanen, J., Poletti, M. C., Tändl, J., Krpic, B., Ramskogler, C. & Enzinger, N., 2014, Leichtmetalle - Prozesse - Anwendungen: Zukunftstechnologie als Basis für neue Mobilitätskonzepte. ., p. 164-178

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Sap concept, in situ formed Al-Al2O3 composites - The effect of powder size on composite's mechanical properties

Balog, M., Simancik, F., Walcher, M., Rajner, W. & Poletti, C., 2011, Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011. European Powder Metallurgy Association, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Powders
mechanical properties
Mechanical properties
composite materials
Composite materials

Study of the failure behaviour of a titanium aluminide alloy during hot formability

Halici, D., Prodinger, D., Huber, D., Stockinger, M. & Poletti, M. C., 2013, (Accepted/In press) Intermetallics 2013. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Substructure Development of AA6082 during Hot Deformation

Poletti, M. C., Sherstnev, P., Schöbel, M. & Sommitsch, C., 2008, Aluminium Alloys - their physical and mechanical properties ; Vol. 1. Wiley-VCH , p. 691-697

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermomechanical behavior of different Ni-base superalloys during cyclic loading at elevated temperatures

Huber, D., Hacksteiner, M., Poletti, M. C., Warchomicka, F. & Stockinger, M., 2014, MATEC Web of Conferences. EDP Sciences, Vol. 14. p. 10002-10002 10002

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Coarsening
Superalloys
Optical microscopy
Precipitates
Plastic deformation

Thermo-mechanical Fatigue Behaviour of AlSi7Mg Alloy Processed by Selective Laser Melting

Sajedi, Z., Casati, R., Poletti, M. C., Skalon, M., Sommitsch, C. & Vedani, M., Oct 2019, (Submitted) Euro PM2019 - Congress and Exhibition. European Powder Metallurgy Association

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File
Melting
Fatigue of materials
High temperature applications
Lasers
Cylinder heads

Tomography in Analytical Transmission Electron Microscopy of Nanomaterials

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 2014, European Workshop on Spatially-Resolved Electron Spectroscopy. ., p. 29-29

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Tomography in Analytical Transmission Electron Microscopy of Nanomaterials

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 2014, Microscopy for Global Challenges. ., p. IT-10-P-2280

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review