20042024
If you made any changes in Pure these will be visible here soon.

Research Output 2004 2019

Filter
Conference contribution
2008

Substructure Development of AA6082 during Hot Deformation

Poletti, M. C., Sherstnev, P., Schöbel, M. & Sommitsch, C., 2008, Aluminium Alloys - their physical and mechanical properties ; Vol. 1. Wiley-VCH , p. 691-697

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Determination of the mechanism of restoration in subtransus hot deformation of Ti-6Al-4V

Warchomicka, F., Poletti, M. C., Stockinger, M. & Degischer, H. P., 2011, (Accepted/In press) THERMEC' 2011. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamic phase evolution in titanium alloy Ti-6Al-4V

Homporova, P., Poletti, M. C., Stockinger, M. & Warchomicka, F., 2011, (Accepted/In press) The 12th World Conference on Titanium. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Hot deformation behaviour of low alloyed steel

Poletti, M. C., Ilie, S., Großeiber, S. & Degischer, H. P., 2011, (Accepted/In press) THERMEC' 2011. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Microstructural characterization of hot deformed Ti-6Al-4V

Warchomicka, F., Poletti, M. C. & Stockinger, M., 2011, (Accepted/In press) The 12th World Conference on Titanium. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Sap concept, in situ formed Al-Al2O3 composites - The effect of powder size on composite's mechanical properties

Balog, M., Simancik, F., Walcher, M., Rajner, W. & Poletti, C., 2011, Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011. European Powder Metallurgy Association, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Powders
mechanical properties
Mechanical properties
composite materials
Composite materials
2012

Dynamic phase evolution in titanium alloy Ti-6A1-4V

Homporová, P., Poletti, M. C., Stockinger, M. & Warchomicka, F., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 737-740 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Titanium alloys
Heat treatment
Metallography
Phase transitions
Cooling

Hot deformation study by processing maps of N containing microalloyed steel

Dikovits, M., Poletti, M. C., Warchomicka, F., Chaudhari, G. P. & Pancholi, V., 2012, TMS Annual Meeting. John Wiley & Sons, Inc, p. 503-510 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hot working
Steel
steels
Processing
strain rate

Microstructural characterization of hot deformed Ti-6A1-4V

Warchomicka, F., Poletti, M. C. & Stockinger, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 729-732 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Strain rate
Microstructure
Restoration
Dynamic recrystallization
Hot working

Microstructure and Strength Evolution in G-AlSi7Cu0.5Mg According to Different Heat Treatment Parameters

Krumphals, F., Poletti, M. C., Albu, M., STAUDER, B., Radis, R. & Sommitsch, C., 2012, MMM 2012 -6th International Conference on Multiscale Materials Modeling. ., p. 5-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

Hot deformation studies of creep resistant Mg alloy

Dikovits, M., Poletti, M. C., Dieringa, H. & Mitsche, S., 2013, Magnesium; Aluminium; Titanium Science and Technology. ., p. 100-100

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Study of the failure behaviour of a titanium aluminide alloy during hot formability

Halici, D., Prodinger, D., Huber, D., Stockinger, M. & Poletti, M. C., 2013, (Accepted/In press) Intermetallics 2013. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Comparison of microstructural changes in three different Ni-base superalloys after cyclic thermo-mechanical treatment

Huber, D., Hacksteiner, M., Poletti, M. C., Warchomicka, F. & Stockinger, M., 2014, 8th International Symposium on Superalloy 718 and Derivatives 2014. John Wiley & Sons, Inc, p. 303-315 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermomechanical treatment
Superalloys
Compressive stress
Software packages
Kinetics

Investigation of pre-existing pores in creep loaded 9Cr steel

Yadav, S. D., Rosc, J., Sartory, B., Brunner, R., Sonderegger, B., Sommitsch, C. & Poletti, M. C., 2014, 3DMS 2014 - Proceedings of the 2nd International Congress on 3D Materials Science. Hoboken, NJ, USA: John Wiley & Sons, Inc, p. 85-90 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Steel
Creep
Cavitation
Tomography
Agglomeration

Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

Halici, D., Prodinger, D., Poletti, M. C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Advanced Materials Research. Trans Tech Publications Ltd., Vol. 783-786. p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

hot working
Hot working
titanium alloys
Titanium alloys
damage

Physical based creep strain modelling of 9%Cr martensitic steel

Yadav, S. D., Schuler, M., Sommitsch, C. & Poletti, M. C., 2014, (Accepted/In press) ECCC International Conference on Creep and Fracture in High Temperature Components: Design & Life Assessment Issues. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Rührreibschweißen von Leichtmetallen und MMCs

Sommitsch, C., Hütter, A., Pakkanen, J., Poletti, M. C., Tändl, J., Krpic, B., Ramskogler, C. & Enzinger, N., 2014, Leichtmetalle - Prozesse - Anwendungen: Zukunftstechnologie als Basis für neue Mobilitätskonzepte. ., p. 164-178

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermomechanical behavior of different Ni-base superalloys during cyclic loading at elevated temperatures

Huber, D., Hacksteiner, M., Poletti, M. C., Warchomicka, F. & Stockinger, M., 2014, MATEC Web of Conferences. EDP Sciences, Vol. 14. p. 10002-10002 10002

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Coarsening
Superalloys
Optical microscopy
Precipitates
Plastic deformation

Tomography in Analytical Transmission Electron Microscopy of Nanomaterials

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 2014, European Workshop on Spatially-Resolved Electron Spectroscopy. ., p. 29-29

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Tomography in Analytical Transmission Electron Microscopy of Nanomaterials

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 2014, Microscopy for Global Challenges. ., p. IT-10-P-2280

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Analytical Electron Tomographic Investigation of an Aluminium Alloy with Nano-Precipitates

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C. & Kothleitner, G., 2015, ASEM Workshop Advanced Electron Microscopy. ., p. 39-39

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Flow instabilities during hot deformation of titanium alloys and titanium matrix composites

Poletti, M. C., Halici, D. & Xue, S., 2015, (Accepted/In press) TMS Proceeding. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Al-Mg-Sc Stringer: Von der Grundlagenuntersuchung zum Prototypen

Tändl, J., Anders, K., Janisch, S. D., Kerstan, H., Palm, F., Entelmann, W. & Poletti, M. C., 9 Nov 2016, 9. Ranshofner Leichtmetalltage: Strategien für nachhaltige Entwicklungen im Leichtbau. p. 22-36

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Analytical Electron Tomographic Invesigations Revealing Self Stabilization of Core-Shell Precipitates through Opposing Diffusion Processes

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C., Sonderegger, B. & Kothleitner, G., 2016, 6th ASEM-Workshop: Advanced Electron Microscopy. Leoben, p. 8 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Characterization of electron beam and friction stir welds in a novel Al-Mg-Sc-Zr alloy

Tändl, J. & Poletti, M. C., 11 Oct 2016, Proceedings of the 10th International Conference on Trends in Welding Research. p. 313-316

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2017

Investigation of the non-equilibrium formation of stoichiometric precipitates in multi-component aluminium alloys

Orthacker, A., Haberfehlner, G., Tändl, J., Poletti, M. C., Sonderegger, B. & Kothleitner, G., 2017, ASEM. p. 50

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2018

Microstructure evolution of ti-5al-5v-5mo-3cr after hot deformation at large and moderate strains

Poletti, M. C., Buzolin, R., Kumar, S., Wang, P. & Simonet-Fotso, T. F. J., 1 Jan 2018, THERMEC 2018. Shabadi, R., Chandra, T., Jeandin, M., Ionescu, M. & Richard, C. (eds.). Trans Tech Publications Ltd., p. 1443-1449 7 p. (Materials Science Forum; vol. 941 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hot working
microstructure
Microstructure
Dynamic recrystallization
Microstructural evolution
2019

Thermo-mechanical Fatigue Behaviour of AlSi7Mg Alloy Processed by Selective Laser Melting

Sajedi, Z., Casati, R., Poletti, M. C., Skalon, M., Sommitsch, C. & Vedani, M., Oct 2019, (Submitted) Euro PM2019 - Congress and Exhibition. European Powder Metallurgy Association

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File
Melting
Fatigue of materials
High temperature applications
Lasers
Cylinder heads