Klaus Krischan

Ass.Prof. Dipl.-Ing. Dr.techn.

1990 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

1992

Konstruktion und Betrieb eines Pulswechselrichters

Krischan, K., 1992, In : e&i - Elektrotechnik und Informationstechnik. 109, 6, p. 314-317

Research output: Contribution to journalArticleResearchpeer-review

2000

Inbetriebnahme des Prüfstandes zur Erprobung von Umrichter-Leistungsteilen

Krischan, K. & Gerbis, R., 2000, .

Research output: Book/ReportOther reportResearch

2003

A New Single Phase Rectifier with Sinusoidal Input Current Enabling Regenerative Braking

Krischan, K. & Seebacher, R., 2003, Proceedings of the 15th International Conference on Electrical Drives and Power Electronics, EDPE 2003. ., p. 557-561

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Precise temperature measurement and heat flow generation for determination of thermal properties of liquid cooling systems for power semiconductors

Seebacher, R., Krischan, K. & Ingruber, R., 2003, (Submitted) EPE 2003. Brussels: EPE Association

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

Emulation eines Stellantriebes

Seebacher, R., Krischan, K. & Schuster, T., 2005, .

Research output: Book/ReportCommissioned reportResearch

2006

2D FEM Calculation vs. Analytical Method on the Basis of the Cogging Torque and the Induced Voltage of a DC-Motor

Ofner, G., Ortner, M. G., Seebacher, R., Dannerer, G., Krischan, K. & Ingruber, R., 2006, International IGTE Symposium on Numerical Field Calculation in Electrical Engineering [Elektronische Ressource]. ., p. 1-7

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Estimation of the electrical and mechanical parameters of a permanent magnet dc motor model taking into account the oscillations of the induced voltage

Seebacher, R., Dannerer, G., Krischan, K. & Ofner, G., 2006, International Conference on Electrical Machines. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

A self-commissioning method for permanent magnet dc-motor drives

Seebacher, R., Dannerer, G. & Krischan, K., 2007, European Conference on Power Electronics and Applications. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Emulator for a DC-Machine, Working as an Actuator in a Torque Split Unit of an All-Wheel Driven Automobile

Schuster, T., Krischan, K., Seebacher, R. & Dannerer, G., 2007, European Conference on Power Electronics and Applications. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Injecting position dependent currents in order to reduce oscillations

Seebacher, R., Dannerer, G. & Krischan, K., 2007, European Conference on Power Electronics and Applications. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Calculation of Load-Dependent Equivalent Circuit Parameters of Squirrel Cage Induction Motors Using Time-Harmonic FEM

Stermecki, A., Biro, O., Preis, K., Rainer, S., Krischan, K. & Ofner, G., 2008, ICEM 2008 Conference Proceedings [Elektronische Ressource]. ., p. 1407-1-1407-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Calculation of Load-Dependent Equivalent Circuit Parameters of Squirrel Cage Induction Motors Using Time-Harmonic FEM

Stermecki, A., Biro, O., Preis, K., Rainer, S., Krischan, K. & Ofner, G., 2008.

Research output: Contribution to conferencePosterResearch

Der Beitrag der elektrischen Antriebstechnik zur Energieeinsparung

Fickert, L., Krischan, K., Bacher, J. P., Dannerer, G., Ingruber, R., Ortner, M. G., Schuster, T. & Seebacher, R., 2008, Kurzfassungsband EnInnov08. Graz: Technische Universität Graz, p. 231-232

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Der Beitrag der elektrischen Antriebstechnik zur Energieeinsparung

Fickert, L., Krischan, K., Bacher, J. P., Dannerer, G., Ingruber, R., Ortner, M. G., Schuster, T. & Seebacher, R., 2008, Energiewende EnInnov08. Graz: Technische Universität Graz, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Direct steady-state computation of mechanical vibrations in electrical machines

Rainer, S., Biro, O., Krischan, K., Stermecki, A. & Leopold, P., 2008.

Research output: Contribution to conferencePosterResearch

Direct steady-state computation of mechanical vibrations in electrical machines

Rainer, S., Biro, O., Krischan, K., Stermecki, A. & Leopold, P., 2008, ICEM 2008 Conference Proceedings [Elektronische Ressource]. ., p. 1005-1-1005-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Efficient Procedure for Induction Motor Equivalent Circuit Parameter Extraction from Time-Harmonic FEM Results

Stermecki, A., Biro, O., Preis, K., Rainer, S., Krischan, K. & Ofner, G., 2008, proceedings of the 13th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering. ., p. 18623-1-18623-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Efficient Procedure for Induction Motor Equivalent Circuit Parameter Extraction from Time-Harmonic FEM Results

Stermecki, A., Biro, O., Preis, K., Rainer, S., Krischan, K. & Ofner, G., 2008.

Research output: Contribution to conferencePosterResearch

Energieeinsatz über den Lebenszyklus elektrischer Antriebe

Krischan, K., 2008, Energiewende. Graz: Verlag der Technischen Universität Graz, p. 1--6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigating the dependency of an induction machine’s main inductance on the supply frequency

Seebacher, R., Krischan, K. & Dannerer, G., 2008, Proceedings of the 2008 International Conference on Electrical Machines. ., p. 1443-1-1443-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigating the dependency of an induction machine’s main inductance on the supply frequency

Seebacher, R., Krischan, K. & Dannerer, G., 2008.

Research output: Contribution to conferencePosterResearch

Investigating the dependency of an induction machine’s main inductance on the supply frequency using FEM

Krischan, K., Seebacher, R. & Dannerer, G., 2008.

Research output: Contribution to conferencePosterResearch

Investigating the dependency of an induction machine’s main inductance on the supply frequency using FEM

Krischan, K., Seebacher, R., Dannerer, G., Ofner, G. & Stermecki, A., 2008, proceedings of the 13th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering. ., p. 77627-1-77627-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigating the dependency of an induction machine’s main inductance on the torque building current component using FEM

Krischan, K., Seebacher, R., Dannerer, G., Ofner, G. & Stermecki, A., 2008.

Research output: Contribution to conferencePosterResearch

Investigating the dependency of an induction machine’s main inductance on the torque building current component using FEM

Krischan, K., Seebacher, R., Dannerer, G. & Ofner, G., 2008, Proceedings of the 2008 International Conference on Electrical Machines. ., p. 1444-1-1444-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Low cost speed control for single phase induction motors - comparing different approaches with regard to efficiency

Krischan, K., Dannerer, G., König, O. & Seebacher, R., 2008, Symposium on Power Electronics, Electrical Drives, Automation & Motion. ., p. 262-1-262-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling the induction machine’s main inductance as a function of the magnetizing and the torque building component of the stator current

Dannerer, G., Seebacher, R., Krischan, K. & Ingruber, R., 2008, Proceedings of the 2008 International Conference on Electrical Machines. ., p. 1441-1-1441-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Untersuchung, Charakterisierung und Bewertung von Elektromotoren für deren Einsatz im Kraftfahrzeug

Willberger, J. & Krischan, K., 2008, .

Research output: Book/ReportOther reportResearch

Wirkungsgrad bei kostengünstigen Varianten der Drehzahlstellung von Einphasen Betriebskondensator Asynchronmotoren, die als Antrieb bei Heizungen eingesetzt werden

Krischan, K., Dannerer, G., König, O. & Kinberger, P., 2008, Energiewende. Verlag der Technischen Universität Graz, p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Wirkungsgradoptimaler Betrieb von Asynchronmaschinen bei variabler Drehzahl

Ingruber, R., Seebacher, R., Dannerer, G. & Krischan, K., 2008, EnInnov08 10. Symposium Energieinnovation, 13.-15.2.2008, Graz/Austria. ., p. 234-235

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2009

1MHZ AC-AC converter with low coupling capacitance for measurements of fast switching signals

Vorauer, M. & Krischan, K., 2009.

Research output: Contribution to conferencePosterResearch

1MHZ AC-AC converter with low coupling capacitance for measurements of fast switching signals

Vorauer, M. & Krischan, K., 2009, Proceedings of the 15th International Conference on Electrical Drives andPower Electronics. ., p. T02-002 1-T02-002 6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determination of Induction Motor End-Winding Leakage Inductances Using 3-D Non-Conforming FE Meshes

Stermecki, A., Biro, O., Preis, K., Rainer, S., Krischan, K. & Ofner, G., 2009.

Research output: Contribution to conferencePosterResearch

Determination of Induction Motor End-Winding Leakage Inductances Using 3-D Non-Conforming FE Meshes

Stermecki, A., Biro, O., Preis, K., Rainer, S., Krischan, K. & Ofner, G., 2009, Proceedings of the 17th Conference on the Computation of Electromagnetic Fields. ., p. 552-553

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling the induction machine’s main inductance as a function of the supply frequency and the magnetizing and the torque building component of the stator current

Seebacher, R., Dannerer, G., Krischan, K. & Ingruber, R., 2009, European Conference on Power Electronics and Applications. ., p. 480/1-480/10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the selection of single phase induction motors for low cost speed controlled drives

Krischan, K., Dannerer, G. & Seebacher, R., 2009.

Research output: Contribution to conferencePosterResearch

On the selection of single phase induction motors for low cost speed controlled drives

Krischan, K., Dannerer, G. & Seebacher, R., 2009, European Conference on Power Electronics and Applications. ., p. 472/1-472/10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The supply frequency’s influence on an induction machine’s main inductance – comparing different approaches using FEM

Krischan, K., Seebacher, R. & Dannerer, G., 2009, Proceedings of the 15th International Conference on Electrical Drives andPower Electronics. ., p. T02-16 1-T02-16 6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Wirkungsgradsteigerung durch geregelten Antrieb von Trinkwasserpumpen

Bina, S. & Krischan, K., 2009, Internationale Energiewirtschaftstagung an der TU Wien. ., p. 1-16

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Advanced Iteration for a Magnetic Equivalent Circuit and Modeling a 3-Phase Transformer

Ortner, M. G., Seebacher, R. & Krischan, K., 2010.

Research output: Contribution to conferencePosterResearch

Advanced Iteration for a Magnetic Equivalent Circuit and Modeling a 3-Phase Transformer

Ortner, M. G., Seebacher, R. & Krischan, K., 2010, International Conference on Electrical Machines. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparing Low Cost Speed Control for Single Phase Induction Motors Concerning Line Reaction and Electromagnetic Compatibility

Krischan, K., Dannerer, G., König, O. & Seebacher, R., 2010, Symposium on Power Electronics, Electrical Drives, Automation & Motion. ., p. 1794-1799

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design of small potable water power plants, with regard to grid connection and efficiency

Schuster, T., Dannerer, G. & Krischan, K., 2010.

Research output: Contribution to conferencePosterResearch

Design of small potable water power plants, with regard to grid connection and efficiency

Schuster, T., Dannerer, G. & Krischan, K., 2010, Symposium on Power Electronics, Electrical Drives, Automation & Motion. ., p. 568-573

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Effizienter Drehzahlsteller mit minimalen Netzrückwirkungen, Bericht 1

König, O., Dannerer, G. & Krischan, K., 2010, .

Research output: Book/ReportOther reportResearch

Effizienter Drehzahlsteller mit minimalen Netzrückwirkungen, Bericht 2

König, O., Krischan, K. & Dannerer, G., 2010, .

Research output: Book/ReportOther reportResearch