Horst-Hannes Cerjak

Em.Univ.-Prof. Dipl.-Ing. Dr.mont.

1990 …2018
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2018

Conference contribution

The Determination of weldability by using simulation techniques

Cerjak, H-H. & Buchmayr, B., 1997, 7th Inter. Symposium on Physical Simulation. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Effect of Microstructure on the Toughness of C-Mn-Multirun Weld Deposit

Cerjak, H-H., Letofsky, E., Pitoiset, X., Seiringer, A. & Evans, G. M., 1995, International Conference on Trends in Welding Research. ., p. 535-540

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Effect of Welding on The Properties of Advanced 9-12% Cr Steels

Cerjak, H-H. & Letofsky, E., 1997, Internationale Konferenz über Schweißtechnik, Werkstoffe und Werkstoffprüfung, Bruchmechanik und Qualitätsmanagement. ., p. 21-31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The heat-affected zone of boron-alloyed creep resistant 9% chromium steels and their susceptibility to Type-IV cracking

Mayr, P. & Cerjak, H-H., 2007, (Accepted/In press) International Conference on Advances in Materials Technology for Fossil Power Plants. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The impact of welding on the creep properties of advanced 9-12% Cr steels

Mayr, P. & Cerjak, H-H., 2008, Creep, Fatigue and Creep-Fatigue Interaction. ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

The Influence of Weld Pattern on the Welding Residual Stresses

Enzinger, N. & Cerjak, H-H., 2003, Trends in Welding Research. David, S. A. (ed.). Materials Park, Ohio: ASM International, p. 850-854

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Main Parameters Influencing the Creep Resistance of Advanced 9-12% Cr-Steels for Power Plant Applications

Cerjak, H-H., Hofer, P., Schaffernak, B., Spiradek, K. & Zeiler, G., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.287-I.295

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The relation between microstructure and creep properties of martensitic 9-12%Cr steels

Cerjak, H-H., Holzer, I., Mayr, P., Pein, C., Sonderegger, B. & Kozeschnik, E., 2008, New Developments on Metallurgy and Applicactions of High Strength Steels - Buenos Aires 2008. Buenos Aires: Unknown Publisher, p. 247-265

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

The relationship between microstructure and mechanical properties of ferritic chromium steel weldments

Mayr, P., Toda, Y., Hara, T., Abe, F. & Cerjak, H-H., 2008, MPA-Seminar. Stuttgart: MPA Stuttgart, p. 71-89

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

The role of materials and welding in modern thermal power generation plants

Cerjak, H-H., Mayr, P. & Holzer, I., 2005, Welding Joints. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Role of Materials in Maximizing the Energy Utilisation from Solid Waste Fuels - Recent Developments in Material Optimisation and Process Design

Mayrhuber, J. & Cerjak, H-H., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. II.741-II.750

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The role of welding for components made from advanced 9-12% Cr steels

Cerjak, H-H., Letofsky, E. & Staubli, M., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998", Liège, 5 - 7 October 1998. ., p. I.105-I.122

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Role of Welding in Modern Power Generation Plants

Cerjak, H-H., 2003, ASR International Conference. ., p. 127-136

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Untersuchung neuartiger Werkzeugkonzepte für das Rührreibschweißen von AW-6063T6

Weinberger, T., Enzinger, N. & Cerjak, H-H., 2008, Tagungsband "Forum für Metallurgie und Werkstofftechnik 2008". ., p. 24-27

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Versprödung von hochfestem Schweißgut beim Spannungsarmglühen

Cerjak, H-H., Caliskanoglu, O., Enzinger, N., Figner, G. & Pudar, M., 2015, DVS Congress 2015. Düsseldorf: ., p. 824-827

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Vorstellung einer verformungsweg-unabhängigen dynamischen Werkstoff-Versagenskriteriums für die numersiche Simulation von Blechumformprozessen

Ofenheimer, A., Buchmayr, B. & Cerjak, H-H., 2003, 1. Sommerschule f. Umformtechnik. ., p. 122-133

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Vorstellung eines verformungsweg-unabhängigen Werkstoff-Versagenskriterium für die numerische Simulation von Blechumformprozessen

Ofenheimer, A., Buchmayr, B. & Cerjak, H-H., 2003, 1. Sommerschule für UMFORMTECHNIK. Leoben: ., p. 122-133

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Weldability and properties of new creep resistant materials for the use in ultra supercritical coal fired power plants

Baune, E., Cerjak, H-H., Hanus, R., Jochum, C., Marshal, A., Mayr, P. & Pasternak, J., 2006, Materials for advanced power engineering. Jülich: Forschungszentrum, Vol. 53. p. 871-891 (Schriften des Forschungszentrums Jülich).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Weldability and Weld Properties for Advanced Power Plant Materials

Cerjak, H-H., Letofsky, E., Jochum, C. & Nies, H., 2002, 7th Liege Conference: Materials for Advanced Power Engineering. Liege: Schriften des Forschungszentrums Jülich, p. 1081-1090 (Materials for Advanced Power Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Weldability of boron alloyed high-temperature resistant 9% chromium casting steel COST-CB2A

Mayr, P., Schalber, A., Letofsky, E. & Cerjak, H-H., 2006, Proceedings of the 7th International Conference on Trends in Welding Research. Ohio, USA: ASM International, p. 299-304

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Weldability study of boron containing 9% chromium steels

Mayr, P., Holzer, I., Mendez Martin, F., Kozeschnik, E. & Cerjak, H-H., 2007, International Charles Parsons Turbine Conference - Power Generation in an Era of Climate Change. ., p. 417-426

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Welding of High Strength Steel in Hydropowre Applications - The Cleuson Dixence Case

Enzinger, N. & Cerjak, H-H., 2009, Proceedings: 8th International Conference on Trends in Welding Research Conference. ., p. 575-580

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Werkstoffe für das Kraftwerk der Zukunft

Cerjak, H-H., Hofer, P., Letofsky, E. & Schaffernak, B., 2001, 7. Internationales Aachener Schweisstechnik Kolloquium. ., p. 193-208

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Werkstoff-Verformbarkeit in Blechumformprozessen unter Berücksichtigung der Umformhistorie

Ofenheimer, A., Buchmayr, B. & Cerjak, H-H., 2005, 24. Verformungskundliches Kolloquium. Leoben: ., p. 21-29

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Zum Einfluss des Schweißens auf das Kriechverhalten moderner Werkstoffe für die thermische Energieerzeugung

Mayr, P. & Cerjak, H-H., 2007, Schweißtechnik und Fügetechnik Schlüsseltechnologien der Zukunft. Aachen: Shaker-Verlag GmbH, p. 447-457

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Other report

Forschungsbericht strategisches vif Projekt A4_P5

Ofenheimer, A., Buchmayr, B. & Cerjak, H-H., 2004, Graz: .

Research output: Book/ReportOther reportResearch

Orientation Imaging Microscopy on 9-12% chromium steels

Sonderegger, B., Weinert, P., Pölt, P. & Cerjak, H-H., 2002, Graz: . (Performance Report)

Research output: Book/ReportOther reportResearch

Paper

Characterisation of Cracks in High Strength Steel Weldments

Enzinger, N. & Cerjak, H-H., 2006.

Research output: Contribution to conferencePaperResearch

Properties of a Watergas Welded Hydropower Shaft: a look in the past for an easier life in future

Enzinger, N., Heber, S-J., Gubeljak, N., Mayrhuber, J. & Cerjak, H-H., 2008.

Research output: Contribution to conferencePaperResearch

PROPERTIES OF HIGH STRENGTH STEEL S890 IN DRY AND AQUEOUS ENVIRONMENTS

Enzinger, N., Cerjak, H-H., Böllinghaus, T., Dorsch, T., Saarinen, K. & Roos, E., 2005.

Research output: Contribution to conferencePaperResearch

Research Activities in the field of Joining in Austria

Enzinger, N. & Cerjak, H-H., 2011.

Research output: Contribution to conferencePaperResearch

Werkstoffentwicklung zur Effizienzsteigerung in der Energieerzeugung als aktiver Beitrag zur CO2-Reduktion

Mayr, P., Holzer, I., Sonderegger, B. & Cerjak, H-H., 2008.

Research output: Contribution to conferencePaperResearch

Poster

Current and future activities at the IWS on the development and improvement of 9-12% Cr steels

Cerjak, H-H., Kozeschnik, E., Li, D., Mayr, P., Pein, C., Rajek, H. J. & Sonderegger, B., 2004.

Research output: Contribution to conferencePosterResearch

EFTEM investigations on precipitates in a creep resistant 9-12% Cr stel

Sonderegger, B., Kothleitner, G., Rechberger, W. & Cerjak, H-H., 2006.

Research output: Contribution to conferencePosterResearch

In Situ Observation of Phase Transformations and Their Effects in 9-12%Cr Steels During Welding

Mayr, P., Palmer, T. A., Elmer, J. W. & Cerjak, H-H., 2006.

Research output: Contribution to conferencePosterResearch

Simulation of the precipitation kinetics during heat treatment and service of creep resistant martensitic 9-12% Cr steel

Holzer, I., Rajek, J., Kozeschnik, E. & Cerjak, H-H., 2006.

Research output: Contribution to conferencePosterResearch

The Influence of Peak Temperature and Deformation on Welding CCT Diagram of Eutectoid Carbon Steel

Maalekian, M., Lendinez, M. L., Kozeschnik, E., Brantner, H. P. & Cerjak, H-H., 2006.

Research output: Contribution to conferencePosterResearch

Website / Web publication

Investigation of watergas welded joints for future decisions concerning old hydropower stations

Enzinger, N., Heber, S-J., Gubeljak, N., Mayrhuber, J. & Cerjak, H-H., 2008

Research output: Non-print formWebsite / Web publicationResearch