Horst-Hannes Cerjak

Em.Univ.-Prof. Dipl.-Ing. Dr.mont.

1990 …2018
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2018

1998

Investigations on Large Turbine Casings and Valve Bodies Made of New 9-10% Cr-Cast Steels and Improvement of Casting Technique and Quality Performance

Hanus, R., Schuster, F. A., Buberl, A. & Cerjak, H-H., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.193-I.204

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mathematical Modelling of Weld Phenomena

Cerjak, H-H. & Buchmayr, B., 1998, EUROJOIN 3. ., p. 259-266

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mathematical Modelling of Weld Phenomena 4

Cerjak, H-H. (ed.) & Bhadeshia, H. K. D. H. (ed.), 1998, Institute of Materials London. (Book / Institute of Materials, Minerals and Mining)

Research output: Book/ReportBookResearch

Microstructural aspects of the weldability of advanced 9-12% Cr-steels

Letofsky, E. & Cerjak, H-H., 1998, Modelling of Microstructural Evolution in Creep Resistant Materials. ., p. 91-103

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructural Physically Based Creep Modelling

Weinert, P., Buchmayr, B. & Cerjak, H-H., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.615-I.626

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of Residual Stresses in a Circumferential Butt Joint

Enzinger, N., Cerjak, H-H. & Engelhard, G., 1998, The 5th International Conference on Residual Stresses, Vol. 1. ., p. 418-423

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Neues Konzept zur Optimierung moderner 9-12% Cr- Stähle

Cerjak, H-H., Hofer, P. & Schaffernak, B., 1998, (Submitted) VGB-Konferenz "Werkstoffe und Schweißtechnik im Kraftwerk 1998. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the Application of Energy-Filtering TEM in Materials Science: III. Precipitates in Steel

Warbichler, P., Hofer, F., Hofer, P., Letofsky, E. & Cerjak, H-H., 1998, In : Micron. p. 63-72

Research output: Contribution to journalArticleResearchpeer-review

On the Development of Residual Stresses in a Circumferential Butt Joint

Enzinger, N. & Cerjak, H-H., 1998, Mathematical Modelling of Weld Phenomena. London: IOM, p. 669-678

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Quantification of Precipitates in Advanced Creep Resistant 9-12% Cr Steels

Hofer, P., Cerjak, H-H. & Schaffernak, B., 1998, In : Steel research. 69, 8, p. 343-348

Research output: Contribution to journalArticleResearch

Quantitative Evaluation of Precipitates in the Martensitic Cast Steel G-X12CrMoWVNbN10-1-1

Hofer, P., Cerjak, H-H. & Warbichler, P., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.549-I.557

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Spannungsrißkorrosion an einem Rauchgaswärmetauscher und Schweißfehler an druckführenden Kesselrohren nach Kraftwerksrevitalisierung

Reinisch, F., Cerjak, H-H. & Hofer, P., 1998, VGB-Konferenz "Werkstoffe und Schweißtechnik im Kraftwerk 1998. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Main Parameters Influencing the Creep Resistance of Advanced 9-12% Cr-Steels for Power Plant Applications

Cerjak, H-H., Hofer, P., Schaffernak, B., Spiradek, K. & Zeiler, G., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.287-I.295

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Role of Materials in Maximizing the Energy Utilisation from Solid Waste Fuels - Recent Developments in Material Optimisation and Process Design

Mayrhuber, J. & Cerjak, H-H., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. II.741-II.750

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The role of welding for components made from advanced 9-12% Cr steels

Cerjak, H-H., Letofsky, E. & Staubli, M., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998", Liège, 5 - 7 October 1998. ., p. I.105-I.122

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1997

Influence of Constraining on the Toughness Behaviour of Multi-Layer Weldments

Kleber, S., Reiss, J., Buchmayr, B., Cerjak, H-H. & Perteneder, E., 1997, 7th Inter. Symposium on Physical Simulation. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mathematical Modelling of Weld Phenomena 3

Cerjak, H-H. (ed.) & Bhadeshia, H. K. D. H. (ed.), 1997, Book 650 ed. London: The Institute of Materials.

Research output: Book/ReportBookResearch

Microstructural evaluation of aged 9-12% Cr steels containing W

Cerjak, H-H., Hofer, P., Schaffernak, B. & Warbichler, P., 1997, In : Practical metallography = Praktische Metallographie. 27, p. 0-0

Research output: Contribution to journalArticleResearchpeer-review

Microstructure of Advanced High Chromium Boiler Tube Steels

Cerjak, H-H., Foldyna, V., Hofer, P. & Schaffernak, B., 1997, Microstructural Developent and Stability in High Chromium Ferritic Power Plant Steels. London: ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

The Determination of weldability by using simulation techniques

Cerjak, H-H. & Buchmayr, B., 1997, 7th Inter. Symposium on Physical Simulation. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Effect of Welding on The Properties of Advanced 9-12% Cr Steels

Cerjak, H-H. & Letofsky, E., 1997, Internationale Konferenz über Schweißtechnik, Werkstoffe und Werkstoffprüfung, Bruchmechanik und Qualitätsmanagement. ., p. 21-31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Main Parameters Influencing the Creep Resistance of Advanced 9- to 12% Cr Steels for Power Plant Applications

Cerjak, H-H., Hofer, P. & Schaffernak, B., 1997, In : VGB-Kraftwerkstechnik. 77, 9, p. 691-698

Research output: Contribution to journalArticleResearch

1996

Basic Aspects of the Weldability of 9-10% Cr-Steels for Advanced Power Generation

Cerjak, H-H., Letofsky, E. & Schuster, F. A., 1996, Tagungsband "Internetional Welding Conference 1996". ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Herstellung und Optimierung der Festigkeit aktivgelöteter Metall/Keramik- und Keramik/Keramik-Verbunde

Wippel, V., Holzner, G. & Cerjak, H-H., 1996, In : Materialwissenschaft und Werkstofftechnik. 27, p. 391-400

Research output: Contribution to journalArticleResearchpeer-review

HF Welding of type 7075 Al-alloys

Cerjak, H-H. & Rohrmoser, P., 1996, IIW Asian Pacific Welding Congress. ., p. 793-810

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Neue Ergebnisse der Hochtemperaturkorrosion in Abfallbefeuerten Dampfkesseln - Ursachen, Mechanismen und Abhilfemaßnahmen

Mayrhuber, J. & Cerjak, H-H., 1996, Tagungsband "Thermische Abfallverwertung" VGB-Konferenz. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Quantifizierung der Zähigkeitsverteilung in einer dickwandigen RDB-UP-Viellagenschweißung

Cerjak, H-H., Nagel, G. & Prader, R., 1996, 22. MPA-Seminar. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Schweißverhalten hochfester, vergüteter Feinkornbaustähle im Streckgrenzenbereich bis 700 N/mm²

Cerjak, H-H., Posch, G., Rauch, R. & Giselbrecht, W., 1996, Tagungsband 3. Deutsch-Rumänische Konferenz. ., p. 3-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1995

A new Technology for Joining Dissimilar Materials for High Temperature Application

Prader, R., Buchmayr, B., Cerjak, H-H., Fleming, A. & Peterseim, J., 1995, ASME Cogen Turbo Power ‘95. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Kesselwerkstoffe für Dampfkraftwerke mit erhöhten überkritischen Auslegungsparametern

Ghanimi, Y. & Cerjak, H-H., 1995, In : Österreichische Ingenieur- und Architekten-Zeitschrift. 140, 10/11, p. 377-380

Research output: Contribution to journalArticleResearch

Mathematical Modelling of Weld Phenomena 2

Cerjak, H-H. (ed.) & Bhadeshia, H. K. D. H. (ed.), 1995, Book 594 ed. London: The Institute of Materials.

Research output: Book/ReportBookResearch

Mechanical Properties of a 9 Cr - 1 Mo Multi-Pass Thick Section Weld

Cerjak, H-H., Prader, R., David, S. A. & Swindeman, R. W., 1995, International Conference on Trends in Welding Research. ., p. 563-568

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure of Advanced High Chromium Boiler Tube Steels

Cerjak, H-H., Foldyna, V., Hofer, P. & Schaffernak, B., 1995, Microstructural Development and Stability in High Chromium Ferritic Power Plant Steels. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure of Welded and Weld Simulated modified 9 Cr - 1 Mo (P 91) Ferritic Steel

Cerjak, H-H., Prader, R. & David, S. A., 1995, B. Smartt, J. A. Johnson, S. A. David. ., p. 247-252

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Model based optimization of graded composition joints between different heat resistant steels

Prader, M., Buchmayr, B. & Cerjak, H-H., 1995, Phase Transformations During the Thermal/Mechanical Processing of Steel, Proc. "34th Conf. of Metallurgists",. ., p. 503-514

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Properties of Active-Brazed HPSN-Steel Joints

Wippel, V., Holzner, G. & Cerjak, H-H., 1995, DVS-Berichte 166 "Hart- und Hochtemperaturlöten und Diffusionsschweißen. ., p. 75-78

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Effect of Microstructure on the Toughness of C-Mn-Multirun Weld Deposit

Cerjak, H-H., Letofsky, E., Pitoiset, X., Seiringer, A. & Evans, G. M., 1995, International Conference on Trends in Welding Research. ., p. 535-540

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermodynamic Interactions in Hot Isostatic Pressed Graded Structures of Dissimilar Heat Resistant Steels

Prader, R., Buchmayr, B., Cerjak, H-H., Fleming, A. & Peterseim, J., 1995, In : Zeitschrift für Metallkunde. 12, p. 864-869

Research output: Contribution to journalArticleResearch

1994

Optimization of active brazed HPSN-steel Joints

Wippel, V., Holzner, G. & Cerjak, H-H., 1994, "2nd European Conference on Joining Technology", Eurojoin 2. ., p. 923-930

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Structure characterisation of the heat affected zone of high strength aluminium alloy

Rohrmoser, P., Cerjak, H-H. & Ofenböck, K., 1994, "2nd European Conference on Joining Technology", Eurojoin 2. ., p. 973-982

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1992

Mathematical Modelling of Weld Phenomena

Cerjak, H-H. (ed.) & Easterling, K. E. (ed.), 1992, Book 533 ed. London: The Institute of Materials.

Research output: Book/ReportBookResearch