Horst-Hannes Cerjak

Em.Univ.-Prof. Dipl.-Ing. Dr.mont.

1990 …2018
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2018

2002

Calculation of the Influence of the Weld Pattern on the final Residual Stress State

Enzinger, N. & Cerjak, H-H., 2002, Proc. of the 6th European Conference on Residual Stresses. Dias, A. M. (ed.). Zuerich: ttp, p. 147-152

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Die Herausforderung an die zerstörungsfreie Prüfung an der Schwelle des 21. Jahrhunderts

Cerjak, H-H., 2002, ÖGfZP-Jahrestagung in: Schweiß- und Prüftechnik 6. ., p. 88-93

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of Boron Distribution in Martensitic 9% Cr Creep Resistant Steel

Hofer, P., Miller, M. K., Babu, S. S., David, S. A. & Cerjak, H-H., 2002, ISIJ International, Vol 42, Supplement. ., p. 62-66

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations and Analysis on the Stationary Creep Behaviour of 9-12% Chromium Ferritic Martensitic Steels

Dimmler, G., Weinert, P. & Cerjak, H-H., 2002, 7th Liege Conference: Materials for Advanced Power Engineering. ., p. 1539-1550

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations and Analysis on the Stationary Creep Behaviour of 9-12% Chromium Ferritic Martensitic Steels

Dimmler, G., Weinert, P. & Cerjak, H-H., 11 Sep 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Mathematical Modelling of Weld Phenomena 6

Cerjak, H-H. (ed.) & Bhadeshia, H. K. D. H. (ed.), 2002, IOM Communications, Book 0784 ed. London: Institute of Materials, Minerals and Mining.

Research output: Book/ReportBookResearch

Metallography of 9 - 12 Cr Steel Power Plant Weld Microstructures

Letofsky, E. & Cerjak, H-H., 20 Nov 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Micro-characterisation of precipitates in 9-12% Cr-steels using EELS and EFTEM

Letofsky-Papst, I., Hofer, F., Warbichler, P., Letofsky, E. & Cerjak, H-H., 2002, Materials Week 2002, ICM-International Congress Centre Munich,. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Micro-characterisation of precipitates in 9-12% Cr-steels using EELS and EFTEM

Letofsky-Papst, I., Hofer, F., Warbichler, P., Letofsky, E. & Cerjak, H-H., 30 Sep 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Microstructure Aspects of Creep Resistant Welded Joints

Letofsky, E. & Cerjak, H-H., 22 May 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Microstructure Aspects of Creep Resistant Welded Joints

Letofsky, E. & Cerjak, H-H., 2002, First International Conference on Advanced Structural Steels (ICASS 2002). ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of Friction Welding of Long Components

Ghanimi, Y., Cerjak, H-H. & Faes, K., 2002, FRIEX Conference. ., p. 32-37

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

New quantitative microstructural characterisation on creep tested welded joints

Letofsky, E. & Cerjak, H-H., 15 Apr 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Orientation Imaging Microscopy on 9-12% chromium steels

Sonderegger, B., Weinert, P., Pölt, P. & Cerjak, H-H., 2002, Graz: . (Performance Report)

Research output: Book/ReportOther reportResearch

Präparation und Gefügeentwicklung am Beispiel des 9%-Chromstahls X10CrMoVNB91

Letofsky, E., Cerjak, H-H. & Schalk, W., 11 Sep 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Probenpräparation für hochauflösende Schädigungsuntersuchungen im REM

Dimmler, G., Schalk, W., Weinert, P., Gruber, H., Wieser, S. & Cerjak, H-H., 11 Sep 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Sample Preparation for High-Resolution Damage Examinations in the SEM

Dimmler, G., Schalk, W., Weinert, P., Gruber, H., Wieser, S. & Cerjak, H-H., 2002, In : Practical metallography = Praktische Metallographie. 39, p. 619-633

Research output: Contribution to journalArticleResearchpeer-review

Verleihung der ersten IWE-Urkunden an der TU Graz

Cerjak, H-H., 2002, In : Schweiss- & Prüftechnik. 05, p. 74-75

Research output: Contribution to journalArticleResearch

Weldability and Weld Properties for Advanced Power Plant Materials

Cerjak, H-H., Letofsky, E., Jochum, C. & Nies, H., 2002, 7th Liege Conference: Materials for Advanced Power Engineering. Liege: Schriften des Forschungszentrums Jülich, p. 1081-1090 (Materials for Advanced Power Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Weldability and Weld Properties for Advanced Power Plant Materials

Cerjak, H-H., Letofsky, E., Jochum, C. & Nies, H., 11 Sep 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2001

7. Werkstofftagung an der TU Graz "Moderne Trends beim MAG Schweissen"

Buchmayr, B. & Cerjak, H-H., 2001, In : Schweiss- & Prüftechnik. 06, p. 91-91

Research output: Contribution to journalArticleResearch

Coupled thermal-mechanical analysis of a novel friction welding process for welding of large size components

Ghanimi, Y., Cerjak, H-H. & Faes, K., 2001, Mathematical Modelling of Weld Phenomena. London, UK: IOM Communication Ltd, p. 897-911

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design of improved heat resistant materials by use of computational thermodynamics

Schaffernak, B. & Cerjak, H-H., 2001, Baltica Conference on Condition and Life Management for Power Plants. ., p. 365-379

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design of Improved Heat Resistant Materials by Use of Computational Thermodynamics

Schaffernak, B. & Cerjak, H-H., 2001, In : Calphad. 25, 2, p. 241-251

Research output: Contribution to journalArticleResearchpeer-review

Essais inter-laboratories relatifs a la "Microstructure en ZAT"

de Meester, B. & Cerjak, H-H., 2001, Soudage et Techniques Connexes, 55, 3/4. Paris: ., p. 19-23

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Mathematical Modelling of Weld Phenomena 5

Cerjak, H-H. (ed.) & Bhadeshia, H. K. D. H. (ed.), 2001, London: IOM Communications, Institute of Materials, London, Book 738.

Research output: Book/ReportBookResearch

Residual Stresses in Welding - New approaches in calculation and control

Enzinger, N. & Cerjak, H-H., 2001, In : Welding & welded structures. 46, 4, p. 139-147

Research output: Contribution to journalArticleResearch

Tagungsband zur 7. Werkstofftagung

Buchmayr, B. (ed.) & Cerjak, H-H. (ed.), 2001, .

Research output: Book/ReportBookResearch

Unireform und Kleinmut

Cerjak, H-H., 9 Nov 2001, Die Presse, p. 23-23.

Research output: Contribution to specialist publicationArticleResearch

Werkstoffe für das Kraftwerk der Zukunft

Cerjak, H-H., Hofer, P., Letofsky, E. & Schaffernak, B., 2001, 7. Internationales Aachener Schweisstechnik Kolloquium. ., p. 193-208

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2000

Atom Probe Field Ion Microscopy Investigation of Boron Containing Martensitic 9% Chromium Steel

Hofer, F., Miller, M. K., Babu, S. S., David, S. A. & Cerjak, H-H., 2000, In : Metallurgical and materials transactions / A. 31A, p. 975-975

Research output: Contribution to journalArticleResearchpeer-review

Development and Qualification of Rotor Steels for 600 to 650°C Application in COST 501/COST 522

Kern, T. U., Cerjak, H-H., Mayr, K. H., Staubli, M., Vanstone, R., Zeiler, G. & Schönfeld, K. H., 2000, Int. Forgemasters Meeting. ., p. 270-276

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Entwicklung moderner Kraftwerkswerkstoffe mit Hilfe der Computermodellierung

Weinert, P., Schaffernak, B. & Cerjak, H-H., 2000, VGB Kongress Kraftwerke. ., p. F6/1-8-F6/1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Neues Konzept zur Optimierung moderner 9 bis 12% Cr-Stähle

Schaffernak, B., Cerjak, H-H. & Hofer, P., 2000, In : VGB-Kraftwerkstechnik. 80, 3, p. 80-84

Research output: Contribution to journalArticleResearch

New Concept for the Optimisation of Modern 9-12% Cr-Steels

Schaffernak, B., Cerjak, H-H. & Hofer, P., 2000, In : VGB PowerTech. 80, 3, p. 57-61

Research output: Contribution to journalArticleResearch

Quantification of precipitates in a 10%Cr steel using TEM and EFTEM

Hofer, F., Cerjak, H-H. & Warbichler, P., 2000, In : Materials science and technology. 16, p. 1221-1225

Research output: Contribution to journalArticleResearchpeer-review

Schweißaufsichtspersonen - Ausbildung und Aufgabenstellungen

Klug, P., Cerjak, H-H. & Letofsky, E., 25 Sep 2000.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Tiefkühlen von Werkzeugstählen

Kulmburg, A., Pohl, F. & Cerjak, H-H., 9 Nov 2000.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

1999

Das Bruchverhalten kriechbelasteter Schweißverbindungen

Cerjak, H-H. & Letofsky, E., 1999, 5th Inter. Conf. "Gefüge und Bruch". ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Licht- und elektronenmikroskopische Untersuchungen zur Beschreibungdes Zeitstandverhaltens von Schweißverbindungen moderner Kraftwerkwerksstoffe

Letofsky, E., Cerjak, H-H. & Warbichler, P., 1999, Fortschritte in der Metallographie. Frankfurt: Werkstoff-Informationsges., Vol. 31. p. 83-89 (Sonderbände der praktischen Metallographie).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructural aspects of the weldability of advanced 9-12% heat resistant Cr-steels

Cerjak, H-H. & Letofsky, E., 1999, International Conference on Trends in Welding Research. ., p. 143-148

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Quantification of Precipitates in a 10% Chromium Steel by means of TEM and EFTEM

Hofer, P., Cerjak, H-H. & Warbichler, P., 22 Nov 1999.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Quantification of Precipitates in a 10% Chromium Steel by means of TEM and EFTEM

Hofer, P., Cerjak, H-H. & Warbichler, P., 1999, Quantitative Microscopy of high Temperature Materials. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Quantification of the Thoughness Distribution in a Heavy Section Submerged Arc Multilayer Reactor Pressure Vessel Weldment

Cerjak, H-H., Nagel, G. & Prader, R., 1999, In : Nuclear engineering and design. 190, p. 29-39

Research output: Contribution to journalArticleResearchpeer-review

1998

Behaviour of advanced 9-12 Cr steels and its weldments in short and long term tests

Cerjak, H-H. & Letofsky, E., 1998, Inter. Conf. on "Advanced Heat Resistant Steels for Power Generation". ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Beitrag zur Quantifizierung der Entwicklung betriebsbedingter Ausscheidungen in neuen 9-12% Cr-Stählen

Hofer, P., Cerjak, H-H. & Warbichler, P., 1998, 10. Internationale Metallographie - Tagung 1998. ., p. 11-25

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterisation of the weldability and behaviour of the heat affected zone for steel E911

Cerjak, H-H., Letofsky, E., Feigl, G. & Pichler, P., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.401-I.410

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Description of the Precipitation Behaviour of Advanced 9-12% Cr-Steels for Power Plant Applications

Schaffernak, B., Hofer, P. & Cerjak, H-H., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.519-I.527

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Evaluation of the Microstructural Stability of 9-12% Chromium Steels for Power Plant Applications Based on a Thermodynamic Model

Cerjak, H-H. & Schaffernak, B., 1998, Modelling of Microstructural Evolution in Creep Resistant Materials. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review