Horst-Hannes Cerjak

Em.Univ.-Prof. Dipl.-Ing. Dr.mont.

1990 …2018
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2018

2009

Friction welding of non-circular bars

Maalekian, M., Brantner, H-P., Cerjak, H-H. & Enzinger, N., 1 Dec 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

INVESTIGATION OF FORMING, JOINING, COATING IN AUTOMOBILE INDUSTRY

Saberi, S., Vallant, R., Cerjak, H-H., Schröttner, H., Hinterdorfer, J. & Rauch, R., 2009, IDDRG 2009 International Conference. ., p. 845-857

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of watergas welded joints for future decisions concerning old hydropower stations

Enzinger, N., Heber, J. S., Cerjak, H. & Mayrhuber, J., 1 Jan 2009, In : Welding in the world. 53, 3-4

Research output: Contribution to journalArticleResearchpeer-review

Welds
Defects
Toughness
Welding
Hardness

Microstructural and mechanical characterisation of friction stir welded 15-5PH steel

Weinberger, T., Enzinger, N. & Cerjak, H., 1 Apr 2009, In : Science and technology of welding and joining. 14, 3, p. 210-215 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Steel
welding
Welds
friction
steels

Microstructural and mechanical characterization of friction stir welded 15-5PH steel

Weinberger, T., Enzinger, N. & Cerjak, H-H., 2009, In : Science and technology of welding and joining. 14, p. 210-215

Research output: Contribution to journalArticleResearchpeer-review

Modelling the Orbital Friction Welding of Pearlitic Steel Bars

Maalekian, M. & Cerjak, H-H., 2009, (Accepted/In press) Trends in Welding Research. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Precipitation reactions in friction stir welded PH15-5 steel

Weinberger, T., Enzinger, N. & Cerjak, H-H., 16 Feb 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Qualification Program for the Rehabilitation of Cleuson-Dixence: Requirements and Results

Cerjak, H-H., Chene, O., Enzinger, N. & Roos, E., 2009, Pre-prints of the Papers Conference High Strength Steels for Hydropower Plants. Takasaki: ., p. 2.1-2.6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

state of the art in numerical modelling of weld phenomena

Enzinger, N. & Cerjak, H-H., 29 Apr 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Thermal-Phase Transformation Modeling and Neural Network Analysis of Friction Welding of Non-Circular Eutectoid Steel Components

Maalekian, M. & Cerjak, H-H., 2009, In : Welding in the world. 53, 3/4, p. R44-R51

Research output: Contribution to journalArticleResearchpeer-review

Viable applications of friction stir welding in the joining of different material combinations in car body production

Weinberger, T., Figner, G., Enzinger, N., Cerjak, H-H. & Christian, K., 19 May 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Welding of High Strength Steel in Hydropower Applications - the Cleuson Dixence Case

Cerjak, H-H. & Enzinger, N., 13 Jan 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Welding of High Strength Steel in Hydropowre Applications - The Cleuson Dixence Case

Enzinger, N. & Cerjak, H-H., 2009, Proceedings: 8th International Conference on Trends in Welding Research Conference. ., p. 575-580

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Actual Challenges to Meet Future Demands for Joining Industry

Cerjak, H-H. & Enzinger, N., 17 Nov 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Application of a comprehensive R&D concept to improve long-term creep behaviour of martensitic 9-12% Cr steels

Cerjak, H-H., Holzer, I., Mayr, P., Pein, C., Sonderegger, B. & Kozeschnik, E., 2008, Advances in Materials Technology for Fossil Power Plants - Proceedings from the 5th International Conference. p. 627-644 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep
Steel
Kinetics
Weldability
Coarsening

Aspects on the Joinability for Advanced Designs Approaching the Future JOIN 4+

Cerjak, H-H. & Enzinger, N., 27 Jun 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Basic Information for a reliable judgment of old hydropower plants

Enzinger, N., Heber, S-J., Cerjak, H-H., Gubeljak, N., Predan, J. & Mayrhuber, J., 2008, Wasserkraftanlagen im Zeichen des Klimawandels. Wien: Technische Universität Wien, p. 39-45

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Basic Information for a reliable judgment of old hydropower plants

Enzinger, N., Heber, S-J., Cerjak, H-H., Gubeljak, N., Predan, J. & Mayrhuber, J., 26 Nov 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparative Analysis of Heat Generation in Friction Welding of Steel Bars

Maalekian, M., Kozeschnik, E., Brantner, H. P. & Cerjak, H-H., 2008, In : Acta materialia. 56, p. 2843-2855

Research output: Contribution to journalArticleResearchpeer-review

COMPUTATIONAL MODELING OF THE STRENGTH EVOLUTION DURING PROCESSING AND SERVICE OF 9-12% CR STEELS

Holzer, I., Kozeschnik, E. & Cerjak, H-H., 2008, The Fifth International Conference on Mathematical Modeling and Computer Simulation of Materials Technologies. ., p. 2-14-2-22

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep Strength of Welded Joints of Ferritic Steels

Cerjak, H-H. & Mayr, P., 2008, Creep resistant steels. 1 ed. Cambridge: Woodhead Publ., p. 472-503

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Evolution of Microstructure and Properties for Friction Stir Welded Martensitic Precipitation-Hardening Steels

Weinberger, T., Führer, B., Khosa, S. U., Enzinger, N. & Cerjak, H-H., 1 Jun 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF CLINCHING PROCESSES FOR CPP COATED THIN STEEL SHEETS

Saberi, S., Cerjak, H-H., Vallant, R., Rauch, R. & Hinterdorfer, J., 2008, (Accepted/In press) Werkstofftagung. TU Graz: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Extrapolation of short-term creep rupture data - The potential risk of over-estimation

Dimmler, G., Weinert, P. & Cerjak, H-H., 2008, In : International journal of pressure vessels and piping. 85, 1-2, p. 55-62

Research output: Contribution to journalArticleResearchpeer-review

Finite Element Modelling of Orbital Friction Welding of Eutectoid Steel Bars

Maalekian, M., Kozeschnik, E., Brantner, H. P. & Cerjak, H-H., 2008, In : Metallurgical and materials transactions / A. 39A, p. 844-852

Research output: Contribution to journalArticleResearchpeer-review

Heat Generation in Friction Welding

Maalekian, M., Kozeschnik, E. & Cerjak, H-H., 2008, Thermal Forming and Welding Distortion. Bremen-Deutschland: BIAS, p. 375-384

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Houdremont Lecture: The Role of Welding in the Power Generation Industry

Cerjak, H-H., 2008, Safety and Reliability of Welded Components. Graz: Verlag der Technischen Universität Graz, p. 17-27

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Influence of plastic anisotropy on the mechanical behavior of clinched joint of different coated thin steel sheets

Saberi, S., Enzinger, N., Vallant, R., Cerjak, H-H., Hinterdorfer, J. & Rauch, R., 2008, In : International journal of materials & product technology. 1, p. 273-276

Research output: Contribution to journalArticleResearchpeer-review

Influence of plastic anisotropy on the mechanical behavior of clinched joint of different coated thin steel sheets

Saberi, S., Enzinger, N., Vallant, R., Cerjak, H-H., Hinterdorfer, J. & Rauch, R., 2008, (Accepted/In press) ESAFORM Conference on Material Forming. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of watergas welded joints for future decisions concerning old hydropower stations

Enzinger, N., Heber, S-J., Gubeljak, N., Mayrhuber, J. & Cerjak, H-H., 2008

Research output: Non-print formWebsite / Web publicationResearch

Investigation of watergas welded joints for future decisions concerning old hydropower stations

Enzinger, N., Heber, S-J., Gubeljak, N., Mayrhuber, J. & Cerjak, H-H., 6 Jul 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Investigation of watergas welded joints for future decisions concerning old hydropower stations

Enzinger, N., Heber, S-J., Gubeljak, N., Mayrhuber, J. & Cerjak, H-H., 14 Mar 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

LESSONS LEARNED FROM A FAILURE CASE IN A HYDROPOWER

Cerjak, H-H. & Enzinger, N., 8 Jan 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Lessons learned from a failure case in a hydropower pressurized shaft with respect to high strength steels

Cerjak, H-H. & Enzinger, N., 2008, IIW International Congress 2008. Kolkata: ., p. I003-I003

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Materials Development for Thermal Power Generation

Cerjak, H-H., Holzer, I., Mayr, P., Pein, C. & Sonderegger, B., 14 Nov 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling the Orbital Friction Welding of Pearlitic Steel Bars

Maalekian, M. & Cerjak, H-H., 1 Jun 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Neue Werkstoffentwicklungen für die Energietechnik

Cerjak, H-H., Holzer, I., Mayr, P., Pein, C., Sonderegger, B. & Kozeschnik, E., 8 Oct 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

NEW APPROACH TO PREDICT THE LONG-TERM CREEP BEHAVIOUR AND EVOLUTION OF PRECIPITATE BACK-STRESS OF 9-12% CHROMIUM STEELS

Holzer, I., Kozeschnik, E. & Cerjak, H-H., 2008, 5th International Conference on Creep, Fatigue and Creep-Fatigue Interaction - Technical Proceedings. ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

New developments to overcome Type IV cracking in welded martensitic creep resistant steels

Mayr, P. & Cerjak, H-H., 24 Nov 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

New developments to overcome Type IV cracking in welded martensitic creep-resistant steels

Mayr, P. & Cerjak, H-H., 2008, In : The Paton welding journal. 11, p. 136-140

Research output: Contribution to journalArticleResearch

New steel grade to overcome Type IV cracking

Mayr, P. & Cerjak, H-H., 11 Jan 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On the influence of hot straining of austenite in solid-state welding of high carbon steel

Maalekian, M., Kozeschnik, E., Brantner, H. P. & Cerjak, H-H., 2008, In : Welding in the world. 52, 1/2, p. 100-106

Research output: Contribution to journalArticleResearchpeer-review

Prediction of the loss of precipitate back-stress in modern 9-12% Cr steels – a numerical approach

Holzer, I., Kozeschnik, E. & Cerjak, H-H., 2008, Verarbeitungs- und Gebraucheigenschaften von Werkstoffen - Heute und Morgen. Graz: ., p. 73-76

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

PREDICTION OF THE LOSS OF PRECIPITATION STRENGTHENING IN MODERN 9-12% CR STEELS – A NUMERICAL APPROACH

Holzer, I., Kozeschnik, E. & Cerjak, H-H., 2008, Advances in Materials Technology for Fossil Power Plants: Proceedings of the Fifth International Conference. ., p. 197-207

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Properties of a Watergas Welded Hydropower Shaft: a look in the past for a easier future

Enzinger, N., Heber, S. J., Gubeljak, N., Mayrhuber, J. & Cerjak, H-H., 28 May 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Properties of a Watergas Welded Hydropower Shaft: a look in the past for an easier life in future

Enzinger, N., Heber, S-J., Gubeljak, N., Mayrhuber, J. & Cerjak, H-H., 2008.

Research output: Contribution to conferencePaperResearch

Safety and Reliability of Welded Components in Energy and Processing Industry

Mayr, P. (ed.), Posch, G. (ed.) & Cerjak, H-H. (ed.), 2008, 1 ed. Graz: Verlag der Technischen Universität Graz.

Research output: Book/ReportBookResearch

SIMULATION AND VALIDATION OF THE EVOLUTION OF PRECIPITATES DURING PRODUCTION AND FABRICATION OF A COMPLEX MARTENSITIC 9 WT.% CR STEEL

Holzer, I., Mayr, P., Sonderegger, B., Kozeschnik, E. & Cerjak, H-H., 2008, Proceedings of 17th International Conference Computer Technology in Welding and Manufacturing. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Structural Integrity Assessment of Watergas Weld Shaft

Gubeljak, N., Heber, S-J., Enzinger, N., Predan, J., Mayrhuber, J., Tisma, Z. & Cerjak, H-H., 2008, Safety and Reliability of Welded Components in Energy nad Processing Industry. Graz: Verlag der Technischen Universität Graz, p. 539-543

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The impact of welding on the creep properties of advanced 9-12% Cr steels

Mayr, P. & Cerjak, H-H., 2008, Creep, Fatigue and Creep-Fatigue Interaction. ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch