Horst-Hannes Cerjak

Em.Univ.-Prof. Dipl.-Ing. Dr.mont.

1990 …2018
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2018

7. Werkstofftagung an der TU Graz "Moderne Trends beim MAG Schweissen"

Buchmayr, B. & Cerjak, H-H., 2001, In : Schweiss- & Prüftechnik. 06, p. 91-91

Research output: Contribution to journalArticleResearch

Abfall der Zeitstandfestigkeit bei langen Zeiten

Cerjak, H-H., Sonderegger, B., Kozeschnik, E., Rajek, H. J., Holzer, I., Mayr, P. & Pein, C., 2006, Die aktuellen Abwertungen bei hochwarmfesten Stählen und deren Konsequenzen für Auslegung und Bau hochmoderner Dampfkraftwerke. ., p. 1-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Abfall der Zeitstandfestigkeit bei langen Zeiten

Cerjak, H-H., Sonderegger, B., Kozeschnik, E., Holzer, I., Mayr, P. & Pein, C., 8 Mar 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A Comprehensive Approach on the Development and Improvement of 9-12% Cr Steels

Weinert, P., Dimmler, G., Letofsky, E., Sonderegger, B., Rajek, H. J. & Cerjak, H-H., 10 Oct 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A Comprehensive Approach on the Development and Improvement of 9-12% Cr Steels

Weinert, P., Dimmler, G., Letofsky, E., Sonderegger, B., Rajek, H. J. & Cerjak, H-H., 2002, 28th MPA-Seminar. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Comprehensive Approach to Predicting Microstructural Stability in Creep Resistant Steels

Cerjak, H-H., Dimmler, G., Hofer, P., Kozeschnik, E., Letofsky, E., Pein, C., Rajek, H. J., Schaffernak, B., Sonderegger, B. & Weinert, P., 2004, 4th international Conference on Advances in Materials Technology for Fossile Power Plants. ., p. 1-22

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A comprehensive approach to the development and improvement of 9-12% Cr steels - Report, status & outlook

Cerjak, H-H., Dimmler, G., Hofer, P., Kozeschnik, E., Letofsky, E., Pein, C., Rajek, H. J., Schaffernak, B., Sonderegger, B. & Weinert, P., 2005, Proceedings of the 4th International Conference on Advances in Materials Technology for Fossil Power Plants. Vol. 2005. p. 1042-1063 22 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep
Steel
Kinetics
Weldability
Coarsening

A Comprehensive Approach to the Development and Improvement of 9-12% Cr Steels – Report, Status & Outlook

Cerjak, H-H., Hofer, P., Dimmler, G., Kozeschnik, E., Letofsky, E., Pein, C., Rajek, H. J., Schaffernak, B., Sonderegger, B. & Weinert, P., 26 Oct 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A critical review of the Forming Limit Stress Curve approach for judging forming severity in deep drawing processes

Ofenheimer, A., Buchmayr, B. & Cerjak, H-H., 2005, 8th International ESAFORM Conference on Material Forming. Bucharest: The publishing house of the Romanian Academy, p. 375-378

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Activities in the field of joining at TU Graz

Cerjak, H-H., Enzinger, N., Kozeschnik, E., Holzer, I., Ghanimi, Y., Vallant, R., Baumgartner, S. & Mayr, P., 2005, Frontiers of Welding and Joining. Peking: ., p. 37-58

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Activities in the field of joining at TU Graz

Cerjak, H-H., Enzinger, N., Kozeschnik, E., Holzer, I., Ghanimi, Y., Vallant, R., Baumgartner, S. & Mayr, P., 15 Aug 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Actual Challenges to Meet Future Demands for Joining Industry

Cerjak, H-H. & Enzinger, N., 17 Nov 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Advanced materials for thermal power generation

Cerjak, H-H., Mayr, P., Hofer, P. & Letofsky, E., 2006, Welding and related inspection technologies. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Advanced materials for thermal power generation

Mayr, P. & Cerjak, H-H., 8 Mar 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Alloy development for critical components of environmentally friendly power plant - ACCEPT - IWS Endbericht 3. Forschungsjahr 01.02.2006 - 31.01.2007

Mayr, P., Holzer, I., Pein, C. & Cerjak, H-H., 2007, Graz: .

Research output: Book/ReportCommissioned reportResearch

Alloy development for critical components of environmentally friendly power plants - ACCEPT - IWS Endbericht 3. Forschungsjahr

Mayr, P., Holzer, I., Pein, C. & Cerjak, H-H., 2007, Graz: .

Research output: Book/ReportCommissioned reportResearch

An adaptation of a high-temperature loading device for scanning electron microscopy as supported by finite element modelling

Dimmler, G., Weidinger, T. & Cerjak, H-H., 2005, In : Practical metallography = Praktische Metallographie. 42, 3, p. 139-152

Research output: Contribution to journalArticleResearchpeer-review

Analysis of steady state creep behaviour of 9-12% chromium ferritic-martensitic steels

Dimmler, G., Weinert, P. & Cerjak, H-H., 2004, In : Materials science and technology. 20, p. 1525-1530

Research output: Contribution to journalArticleResearchpeer-review

A new Technology for Joining Dissimilar Materials for High Temperature Application

Prader, R., Buchmayr, B., Cerjak, H-H., Fleming, A. & Peterseim, J., 1995, ASME Cogen Turbo Power ‘95. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of a comprehensive R&D concept to improve long-term creep behaviour of martensitic 9-12% Cr steels

Cerjak, H-H., Holzer, I., Mayr, P., Pein, C., Sonderegger, B. & Kozeschnik, E., 2008, Advances in Materials Technology for Fossil Power Plants - Proceedings from the 5th International Conference. p. 627-644 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep
Steel
Kinetics
Weldability
Coarsening

APPLICATION OF A COMPREHENSIVE R&D CONCEPT TO IMPROVE LONG-TREM CREEP BEHAVIOUR OF MARTENSITIC 9-12% Cr STEELS

Cerjak, H-H. & Mayr, P., 2 Oct 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

APPLICATION OF A COMPREHENSIVE R&D CONCEPT TO IMPROVE LONG-TREM CREEP BEHAVIOUR OF MARTENSITIC 9-12% Cr STEELS

Cerjak, H-H., Mayr, P., Holzer, I., Pein, C., Sonderegger, B. & Kozeschnik, E., 2007, Advances in Materials Technology for Fossil Power Plants. ., p. 1-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Prominent Failure Case in Welding High Strength Steel: Hydropower Plant Cleuson-Dixence

Cerjak, H-H. & Enzinger, N., 2009, Innovative Technologies for Joining Advanced Materials. Timisoara: Sudura, p. 26-31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

A Prominent Failure Case in Welding of High Strength Steel: Hydropower Plant Cleuson-Dixence

Cerjak, H-H. & Enzinger, N., 11 Jun 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Aspects of Welding High Strength Steels

Cerjak, H-H. & Enzinger, N., 2006, International Conference on Advanced Structural Steels. ., p. 697-703

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Aspects of Welding High Strength Steels

Cerjak, H-H. & Enzinger, N., 22 Aug 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Aspects of welding of advanced 9-12% Cr steels for thermal power plants and HSLA steels for power plants application

Cerjak, H-H., 2004, Advanced Metallic Materials and their Joining. ., p. 30-30

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Aspects on the Joinability for Advanced Designs

Cerjak, H-H. & Enzinger, N., 3 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Aspects on the Joinability for Advanced Designs

Cerjak, H-H. & Enzinger, N., 2010, Innovative Technologies for Joining Advanced Materials. SUDURA Publishing House, p. 40-57

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Aspects on the Joinability for Advanced Designs Approaching the Future JOIN 4+

Cerjak, H-H. & Enzinger, N., 27 Jun 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Atom Probe Field Ion Microscopy Investigation of Boron Containing Martensitic 9% Chromium Steel

Hofer, F., Miller, M. K., Babu, S. S., David, S. A. & Cerjak, H-H., 2000, In : Metallurgical and materials transactions / A. 31A, p. 975-975

Research output: Contribution to journalArticleResearchpeer-review

Atom probe investigations on temper embrittlement and reversible temper embrittlement in S 690 steel weld metal

Cerjak, H-H., Mendez Martin, F. & Domakova, M., 7 Jul 2017, In : Science and technology of welding and joining. p. 1743-2936 9 p.

Research output: Contribution to journalArticleResearchpeer-review

embrittlement
Steel
Embrittlement
Welds
Metals

Auswirkungen einer falschen Spannungsarmglühung beim Schweißen höchstfester Stähle

Enzinger, N. & Cerjak, H-H., 18 Oct 2017, Schadensanalyse 2017: Schäden an geschweißten Bauteilen. p. 211-221

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Basic Aspects of the Weldability of 9-10% Cr-Steels for Advanced Power Generation

Cerjak, H-H., Letofsky, E. & Schuster, F. A., 1996, Tagungsband "Internetional Welding Conference 1996". ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Basic Aspects of Weldability of Engineering Materials

Cerjak, H-H., 2003, Trends in Welding Research. Materials Park, Ohio: ASM International, p. 542-550

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Basic Information for a reliable judgment of old hydropower plants

Enzinger, N., Heber, S-J., Cerjak, H-H., Gubeljak, N., Predan, J. & Mayrhuber, J., 2008, Wasserkraftanlagen im Zeichen des Klimawandels. Wien: Technische Universität Wien, p. 39-45

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Basic Information for a reliable judgment of old hydropower plants

Enzinger, N., Heber, S-J., Cerjak, H-H., Gubeljak, N., Predan, J. & Mayrhuber, J., 26 Nov 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Behaviour of advanced 9-12 Cr steels and its weldments in short and long term tests

Cerjak, H-H. & Letofsky, E., 1998, Inter. Conf. on "Advanced Heat Resistant Steels for Power Generation". ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Beispiele zur Berechnung von Schweißeigenspannungen

Enzinger, N. & Cerjak, H-H., 2003, Jahrbuch Schweißtechnik 2004. Düsseldorf: DVS, p. 184-192

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Beitrag zur Quantifizierung der Entwicklung betriebsbedingter Ausscheidungen in neuen 9-12% Cr-Stählen

Hofer, P., Cerjak, H-H. & Warbichler, P., 1998, 10. Internationale Metallographie - Tagung 1998. ., p. 11-25

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Boron strengthening in ferritic 9Cr3W3CoVNbBN steel with improved crosseld creep performance

Mayr, P., Holzer, I., Albu, M., Kothleitner, G., Cerjak, H-H. & Allen, S. M., 2011, Advances in Materials Technology for Fossil Power Plants. ., p. 640-653

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Boron strengthening in ferritic 9Cr3W3CoVNbBN steel with improved crossweld creep performance

Mayr, P., Holzer, I., Albu, M., Kothleitner, G., Cerjak, H-H. & Allen, S. M., 2010, (Accepted/In press) International Conference on Advances in Materials Technology for Fossil Power Plants. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Calculation of the Influence of the Weld Pattern on the final Residual Stress State

Enzinger, N. & Cerjak, H-H., 2002, Proc. of the 6th European Conference on Residual Stresses. Dias, A. M. (ed.). Zuerich: ttp, p. 147-152

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterisation of cracks in high strength steel weldments

Enzinger, N. & Cerjak, H-H., 2007, In : Welding in the world. 51, 11/12, p. 29-33

Research output: Contribution to journalArticleResearchpeer-review

Characterisation of Cracks in High Strength Steel Weldments

Enzinger, N. & Cerjak, H-H., 27 Aug 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characterisation of Cracks in High Strength Steel Weldments

Enzinger, N. & Cerjak, H-H., 2006.

Research output: Contribution to conferencePaperResearch

Characterisation of Cracks in High Strength Steel Weldments

Enzinger, N. & Cerjak, H-H., 21 Mar 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Characterisation of the weldability and behaviour of the heat affected zone for steel E911

Cerjak, H-H., Letofsky, E., Feigl, G. & Pichler, P., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.401-I.410

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Combined Orientation and Phase Contrast Imaging of Precipitates in 9-12% Cr Steels

Sonderegger, B., Mitsche, S. & Cerjak, H-H., 26 Sep 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparative Analysis of Heat Generation in Friction Welding of Steel Bars

Maalekian, M., Kozeschnik, E., Brantner, H. P. & Cerjak, H-H., 2008, In : Acta materialia. 56, p. 2843-2855

Research output: Contribution to journalArticleResearchpeer-review