Horst-Hannes Cerjak

Em.Univ.-Prof. Dipl.-Ing. Dr.mont.

1990 …2018
If you made any changes in Pure these will be visible here soon.

Research Output 1992 2018

1992

Mathematical Modelling of Weld Phenomena

Cerjak, H-H. (ed.) & Easterling, K. E. (ed.), 1992, Book 533 ed. London: The Institute of Materials.

Research output: Book/ReportBookResearch

1994

Optimization of active brazed HPSN-steel Joints

Wippel, V., Holzner, G. & Cerjak, H-H., 1994, "2nd European Conference on Joining Technology", Eurojoin 2. ., p. 923-930

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Structure characterisation of the heat affected zone of high strength aluminium alloy

Rohrmoser, P., Cerjak, H-H. & Ofenböck, K., 1994, "2nd European Conference on Joining Technology", Eurojoin 2. ., p. 973-982

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1995

A new Technology for Joining Dissimilar Materials for High Temperature Application

Prader, R., Buchmayr, B., Cerjak, H-H., Fleming, A. & Peterseim, J., 1995, ASME Cogen Turbo Power ‘95. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Kesselwerkstoffe für Dampfkraftwerke mit erhöhten überkritischen Auslegungsparametern

Ghanimi, Y. & Cerjak, H-H., 1995, In : Österreichische Ingenieur- und Architekten-Zeitschrift. 140, 10/11, p. 377-380

Research output: Contribution to journalArticleResearch

Mathematical Modelling of Weld Phenomena 2

Cerjak, H-H. (ed.) & Bhadeshia, H. K. D. H. (ed.), 1995, Book 594 ed. London: The Institute of Materials.

Research output: Book/ReportBookResearch

Mechanical Properties of a 9 Cr - 1 Mo Multi-Pass Thick Section Weld

Cerjak, H-H., Prader, R., David, S. A. & Swindeman, R. W., 1995, International Conference on Trends in Welding Research. ., p. 563-568

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure of Advanced High Chromium Boiler Tube Steels

Cerjak, H-H., Foldyna, V., Hofer, P. & Schaffernak, B., 1995, Microstructural Development and Stability in High Chromium Ferritic Power Plant Steels. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure of Welded and Weld Simulated modified 9 Cr - 1 Mo (P 91) Ferritic Steel

Cerjak, H-H., Prader, R. & David, S. A., 1995, B. Smartt, J. A. Johnson, S. A. David. ., p. 247-252

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Model based optimization of graded composition joints between different heat resistant steels

Prader, M., Buchmayr, B. & Cerjak, H-H., 1995, Phase Transformations During the Thermal/Mechanical Processing of Steel, Proc. "34th Conf. of Metallurgists",. ., p. 503-514

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Properties of Active-Brazed HPSN-Steel Joints

Wippel, V., Holzner, G. & Cerjak, H-H., 1995, DVS-Berichte 166 "Hart- und Hochtemperaturlöten und Diffusionsschweißen. ., p. 75-78

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Effect of Microstructure on the Toughness of C-Mn-Multirun Weld Deposit

Cerjak, H-H., Letofsky, E., Pitoiset, X., Seiringer, A. & Evans, G. M., 1995, International Conference on Trends in Welding Research. ., p. 535-540

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Thermodynamic Interactions in Hot Isostatic Pressed Graded Structures of Dissimilar Heat Resistant Steels

Prader, R., Buchmayr, B., Cerjak, H-H., Fleming, A. & Peterseim, J., 1995, In : Zeitschrift für Metallkunde. 12, p. 864-869

Research output: Contribution to journalArticleResearch

1996

Basic Aspects of the Weldability of 9-10% Cr-Steels for Advanced Power Generation

Cerjak, H-H., Letofsky, E. & Schuster, F. A., 1996, Tagungsband "Internetional Welding Conference 1996". ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Herstellung und Optimierung der Festigkeit aktivgelöteter Metall/Keramik- und Keramik/Keramik-Verbunde

Wippel, V., Holzner, G. & Cerjak, H-H., 1996, In : Materialwissenschaft und Werkstofftechnik. 27, p. 391-400

Research output: Contribution to journalArticleResearchpeer-review

HF Welding of type 7075 Al-alloys

Cerjak, H-H. & Rohrmoser, P., 1996, IIW Asian Pacific Welding Congress. ., p. 793-810

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Neue Ergebnisse der Hochtemperaturkorrosion in Abfallbefeuerten Dampfkesseln - Ursachen, Mechanismen und Abhilfemaßnahmen

Mayrhuber, J. & Cerjak, H-H., 1996, Tagungsband "Thermische Abfallverwertung" VGB-Konferenz. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Quantifizierung der Zähigkeitsverteilung in einer dickwandigen RDB-UP-Viellagenschweißung

Cerjak, H-H., Nagel, G. & Prader, R., 1996, 22. MPA-Seminar. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Schweißverhalten hochfester, vergüteter Feinkornbaustähle im Streckgrenzenbereich bis 700 N/mm²

Cerjak, H-H., Posch, G., Rauch, R. & Giselbrecht, W., 1996, Tagungsband 3. Deutsch-Rumänische Konferenz. ., p. 3-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1997

Influence of Constraining on the Toughness Behaviour of Multi-Layer Weldments

Kleber, S., Reiss, J., Buchmayr, B., Cerjak, H-H. & Perteneder, E., 1997, 7th Inter. Symposium on Physical Simulation. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mathematical Modelling of Weld Phenomena 3

Cerjak, H-H. (ed.) & Bhadeshia, H. K. D. H. (ed.), 1997, Book 650 ed. London: The Institute of Materials.

Research output: Book/ReportBookResearch

Microstructural evaluation of aged 9-12% Cr steels containing W

Cerjak, H-H., Hofer, P., Schaffernak, B. & Warbichler, P., 1997, In : Practical metallography = Praktische Metallographie. 27, p. 0-0

Research output: Contribution to journalArticleResearchpeer-review

Microstructure of Advanced High Chromium Boiler Tube Steels

Cerjak, H-H., Foldyna, V., Hofer, P. & Schaffernak, B., 1997, Microstructural Developent and Stability in High Chromium Ferritic Power Plant Steels. London: ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

The Determination of weldability by using simulation techniques

Cerjak, H-H. & Buchmayr, B., 1997, 7th Inter. Symposium on Physical Simulation. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Effect of Welding on The Properties of Advanced 9-12% Cr Steels

Cerjak, H-H. & Letofsky, E., 1997, Internationale Konferenz über Schweißtechnik, Werkstoffe und Werkstoffprüfung, Bruchmechanik und Qualitätsmanagement. ., p. 21-31

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Main Parameters Influencing the Creep Resistance of Advanced 9- to 12% Cr Steels for Power Plant Applications

Cerjak, H-H., Hofer, P. & Schaffernak, B., 1997, In : VGB-Kraftwerkstechnik. 77, 9, p. 691-698

Research output: Contribution to journalArticleResearch

1998

Behaviour of advanced 9-12 Cr steels and its weldments in short and long term tests

Cerjak, H-H. & Letofsky, E., 1998, Inter. Conf. on "Advanced Heat Resistant Steels for Power Generation". ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Beitrag zur Quantifizierung der Entwicklung betriebsbedingter Ausscheidungen in neuen 9-12% Cr-Stählen

Hofer, P., Cerjak, H-H. & Warbichler, P., 1998, 10. Internationale Metallographie - Tagung 1998. ., p. 11-25

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterisation of the weldability and behaviour of the heat affected zone for steel E911

Cerjak, H-H., Letofsky, E., Feigl, G. & Pichler, P., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.401-I.410

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Description of the Precipitation Behaviour of Advanced 9-12% Cr-Steels for Power Plant Applications

Schaffernak, B., Hofer, P. & Cerjak, H-H., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.519-I.527

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Evaluation of the Microstructural Stability of 9-12% Chromium Steels for Power Plant Applications Based on a Thermodynamic Model

Cerjak, H-H. & Schaffernak, B., 1998, Modelling of Microstructural Evolution in Creep Resistant Materials. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigations on Large Turbine Casings and Valve Bodies Made of New 9-10% Cr-Cast Steels and Improvement of Casting Technique and Quality Performance

Hanus, R., Schuster, F. A., Buberl, A. & Cerjak, H-H., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.193-I.204

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mathematical Modelling of Weld Phenomena

Cerjak, H-H. & Buchmayr, B., 1998, EUROJOIN 3. ., p. 259-266

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mathematical Modelling of Weld Phenomena 4

Cerjak, H-H. (ed.) & Bhadeshia, H. K. D. H. (ed.), 1998, Institute of Materials London. (Book / Institute of Materials, Minerals and Mining)

Research output: Book/ReportBookResearch

Microstructural aspects of the weldability of advanced 9-12% Cr-steels

Letofsky, E. & Cerjak, H-H., 1998, Modelling of Microstructural Evolution in Creep Resistant Materials. ., p. 91-103

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructural Physically Based Creep Modelling

Weinert, P., Buchmayr, B. & Cerjak, H-H., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.615-I.626

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of Residual Stresses in a Circumferential Butt Joint

Enzinger, N., Cerjak, H-H. & Engelhard, G., 1998, The 5th International Conference on Residual Stresses, Vol. 1. ., p. 418-423

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Neues Konzept zur Optimierung moderner 9-12% Cr- Stähle

Cerjak, H-H., Hofer, P. & Schaffernak, B., 1998, (Submitted) VGB-Konferenz "Werkstoffe und Schweißtechnik im Kraftwerk 1998. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the Application of Energy-Filtering TEM in Materials Science: III. Precipitates in Steel

Warbichler, P., Hofer, F., Hofer, P., Letofsky, E. & Cerjak, H-H., 1998, In : Micron. p. 63-72

Research output: Contribution to journalArticleResearchpeer-review

On the Development of Residual Stresses in a Circumferential Butt Joint

Enzinger, N. & Cerjak, H-H., 1998, Mathematical Modelling of Weld Phenomena. London: IOM, p. 669-678

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Quantification of Precipitates in Advanced Creep Resistant 9-12% Cr Steels

Hofer, P., Cerjak, H-H. & Schaffernak, B., 1998, In : Steel research. 69, 8, p. 343-348

Research output: Contribution to journalArticleResearch

Quantitative Evaluation of Precipitates in the Martensitic Cast Steel G-X12CrMoWVNbN10-1-1

Hofer, P., Cerjak, H-H. & Warbichler, P., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.549-I.557

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Spannungsrißkorrosion an einem Rauchgaswärmetauscher und Schweißfehler an druckführenden Kesselrohren nach Kraftwerksrevitalisierung

Reinisch, F., Cerjak, H-H. & Hofer, P., 1998, VGB-Konferenz "Werkstoffe und Schweißtechnik im Kraftwerk 1998. ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Main Parameters Influencing the Creep Resistance of Advanced 9-12% Cr-Steels for Power Plant Applications

Cerjak, H-H., Hofer, P., Schaffernak, B., Spiradek, K. & Zeiler, G., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. I.287-I.295

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Role of Materials in Maximizing the Energy Utilisation from Solid Waste Fuels - Recent Developments in Material Optimisation and Process Design

Mayrhuber, J. & Cerjak, H-H., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998. ., p. II.741-II.750

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The role of welding for components made from advanced 9-12% Cr steels

Cerjak, H-H., Letofsky, E. & Staubli, M., 1998, 6th Liège - Conference "Materials for Advanced Power Engineering 1998", Liège, 5 - 7 October 1998. ., p. I.105-I.122

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1999

Das Bruchverhalten kriechbelasteter Schweißverbindungen

Cerjak, H-H. & Letofsky, E., 1999, 5th Inter. Conf. "Gefüge und Bruch". ., p. 0-0

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Licht- und elektronenmikroskopische Untersuchungen zur Beschreibungdes Zeitstandverhaltens von Schweißverbindungen moderner Kraftwerkwerksstoffe

Letofsky, E., Cerjak, H-H. & Warbichler, P., 1999, Fortschritte in der Metallographie. Frankfurt: Werkstoff-Informationsges., Vol. 31. p. 83-89 (Sonderbände der praktischen Metallographie).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructural aspects of the weldability of advanced 9-12% heat resistant Cr-steels

Cerjak, H-H. & Letofsky, E., 1999, International Conference on Trends in Welding Research. ., p. 143-148

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Quantification of Precipitates in a 10% Chromium Steel by means of TEM and EFTEM

Hofer, P., Cerjak, H-H. & Warbichler, P., 22 Nov 1999.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch