No photo of Hans-Herwig Priebsch

Hans-Herwig Priebsch

Ao.Univ.-Prof.i.R. Dipl.-Ing. Dr.techn.

1979 …2016
If you made any changes in Pure these will be visible here soon.

Research Output 1979 2016

Filter
Article
2015

Edge loading and running-in wear in dynamically loaded journal bearings

Sander, D. E., Allmaier, H., Priebsch, H-H., Reich, F. M., Witt, M. & Skiadas, A., 2015, In : Tribology international. 92, p. 395-403

Research output: Contribution to journalArticleResearchpeer-review

Non-Newtonian and running-in wear effects in journal bearings operating under mixed lubrication

Allmaier, H., Sander, D. E., Priebsch, H-H., Witt, M., Füllenbach, T. & Skiadas, A., 2015, In : Proceedings of the Institution of Mechanical Engineers / J. 230, 2, p. 135-142

Research output: Contribution to journalArticleResearchpeer-review

Simulation of journal bearing friction in severe mixed lubrication – Validation and effect of surface smoothing due to running-in

Sander, D. E., Allmaier, H., Priebsch, H-H., Witt, M. & Skiadas, A., 2015, In : Tribology international. 96, p. 173-183

Research output: Contribution to journalArticleResearchpeer-review

2014

Impact of high pressure and shear thinning on journal bearing friction

Sander, D. E., Allmaier, H., Priebsch, H-H., Reich, F. M., Witt, M., Füllenbach, T., Skiadas, A., Brouwer, L. & Schwarze, H., 2014, In : Tribology international. 81, p. 29-37

Research output: Contribution to journalArticleResearchpeer-review

2013

Predicting Friction Reliably and Accurately in Journal Bearings - Extending the EHD Simulation Model to TEHD

Allmaier, H., Priestner, C., Reich, F. M., Priebsch, H-H. & Novotny-Farkas, F., 2013, In : Tribology international. 58, p. 20-28

Research output: Contribution to journalArticleResearchpeer-review

2012

Predicting Friction Reliably and Accuretely in Journal Bearings - The Importance of Extensive Oil-Models

Allmaier, H., Priestner, C., Priebsch, H-H., Forster, C. & Novotny - Farkas, F., 2012, In : Tribology international. 48, p. 93-101

Research output: Contribution to journalArticleResearchpeer-review

2011

Predicting Friction Reliably and Accurentely in Journal Bearings - A Systematic Validation of Simulation Results with Experimental Measurements

Allmaier, H., Priestner, C., Priebsch, H-H., Forstner, C. & Novotny-Farkas, F., 2011, In : Tribology international. 44, 10, p. 1151-1160

Research output: Contribution to journalArticleResearchpeer-review

Vibro-Acoustic Simulation of Aluminium Foam Parts Using Multiscale Technique

Karas, L., Jalics, K. & Priebsch, H-H., 2011, In : Advanced Engineering Materials. 11, 13, p. 1015-1018

Research output: Contribution to journalArticleResearchpeer-review

Reduzierung von Schwingungen und Geräuschen an Rad und Schiene - Modellentwicklung, Simulation und Optimierung

Jalics, K., Nemeth, I., Priebsch, H-H., Schleinzer, G., Ohenhen, G. & Weidinger, P., 2010, In : ZEVrail. 134, p. 2-9

Research output: Contribution to journalArticleResearch

2009

Effiziente und exakte Bestimmung der Übertragungscharakteristiken von Fahrzeugkarosserien

Priebsch, H-H., Brandl, F., Brandl, S., Höldrich, R. & Sontacchi, A., 2009, In : Automobiltechnische Zeitschrift. 11, 111, p. 818-825

Research output: Contribution to journalArticleResearch

Open Access
File
2008

Alternative Fahrzeugkarosserien - Entwicklung eines Stahl-Spaceframe-Konzepts

Böhler, E., Kronsteiner, G., Priebsch, H-H., Bauer, M. & Wagner, G., 2008, In : Automobiltechnische Zeitschrift. 10, p. 878-884

Research output: Contribution to journalArticleResearch

Open Access
File

Application of the Wave Based Technique for steady-state semi-infinite sound radiation analysis

Rejlek, J., Plymers, B., Hepberger, A., Priebsch, H-H. & Desmet, W., 2008, In : Computer assisted mechanics and engineering sciences. 15, p. 337-251

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Validation of Boom Noise in an All-Wheel Drivetrain

Girstmair, J., Priebsch, H-H., Kasper, M., Rabofsky, A. & Ovari, T., 2008, In : ATZautotechnology. 8, 3, p. 54-58

Research output: Contribution to journalArticleResearch

Open Access
File
2007

Surface Contact Analysis in Axial Thrust Bearings Based on Different Numerical Interpolation Approaches

Offner, G., Lechner, M., Mahmoud, K. & Priebsch, H-H., 2007, In : Proceedings of the Institution of Mechanical Engineers / K. 221, K;JMBD, p. 233-245

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

The prediction of low- and mid-frequency internal road vehicle noise: a literature survey

Lalor, N. & Priebsch, H-H., 2007, In : Proceedings of the Institution of Mechanical Engineers / D. 221, D;Autom.Eng., p. 245-261

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Thermo-Elasto-Hydrodynamic Lubrication Model for Journal Bearing Including Shear Rate Dependent Viscosity

Bukovnik, S., Offner, G., Caika, V., Priebsch, H-H. & Bartz, W. J., 2007, In : Lubrication science. 19, 4, p. 231-245

Research output: Contribution to journalArticleResearchpeer-review

2006

Geräuschreduktion an Motorbauteilen durch hoch dämpfende Materialien

Höfler, D., Priebsch, H-H., Rust, A. & Brandl, F., 2006, In : Motortechnische Zeitschrift. 67, 11, p. 860-868

Research output: Contribution to journalArticleResearch

2005

Berechnung akustischer Verbesserungspotenziale von Leichtbaukarosserien bis Hz mittels FEM-Schwachstellenanalyse

Böhler, E., Priebsch, H-H. & Bauer, M., 2005, In : Automobiltechnische Zeitschrift. 10, p. 880-886

Research output: Contribution to journalArticleResearch

Seperation of Reference Motions and Elastic Deformations in an Elastic Multi-body System

Offner, G., Eizenberger, T. & Priebsch, H-H., 2005, In : Proceedings of the Institution of Mechanical Engineers / K. p. 1-5

Research output: Contribution to journalArticleResearchpeer-review

2004

Geräuschberechnung an Kraftfahrzeugen mit Statistischen Methoden

Hauer, I., Glettler, A., Jalics, K., Priebsch, H-H., Thorsten, B. & Fankhauser, C., 2004, In : Automobiltechnische Zeitschrift. 12, p. 1116-1123

Research output: Contribution to journalArticleResearch

2001

Simulation of multi-body dynamics and elasto-hydrodynamic excitation in engines especially considering piston-liner contact

Offner, G., Krasser, J., Laback, O. & Priebsch, H-H., 2001, In : Proceedings of the Institution of Mechanical Engineers / K. 215, 02699, p. 93-102

Research output: Contribution to journalArticleResearchpeer-review

1999

Simulation of Effects of Piston Ring Parameters on Ring Movement, Friction, Blow-by and LOC

Priebsch, H-H. & Herbst, H., 1999, In : Motortechnische Zeitschrift. November, p. 772-779

Research output: Contribution to journalArticleResearch

Open Access
File
1993

Prediction Technique for Stress and Vibration of Nonlinear Supported, Rotating Crankshafts

Priebsch, H-H., Affenzeller, J. & Gran, S., 1993, In : Journal of engineering for gas turbines and power. 115, p. 711-722

Research output: Contribution to journalArticleResearchpeer-review