No photo of Hans-Herwig Priebsch

Hans-Herwig Priebsch

Ao.Univ.-Prof.i.R. Dipl.-Ing. Dr.techn.

1979 …2016
If you made any changes in Pure these will be visible here soon.

Research Output 1979 2016

Filter
Conference contribution
2013

Possibilities for Improving the Drivability of Conventional and Hybrid Drivetrains

Girstmair, J., Priebsch, H-H. & Nijman, E., 2013, 13th Stuttgart International Symposium. Automotive and Engine Technology Volume 1 and 2. ., p. 79-96

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2012

Application of the wave based technique for the exterior acoustic field of a simplified car mock-up

Parise, G., Silar, P., Priebsch, H-H., Miccoli, G., Bertolini, C. & Nizzoli, T., 2012, International Conference on Noise and Vibration Engineering. ., p. ?-?

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2011

On the Use of the Wave Based Technique for a Three-Dimensional Noise Radiation Analysis of Coupled Vibro-Acoustic Problems

Rejlek, J. & Priebsch, H-H., 2011, SAE Paper-No. 2011-01-1713. ., p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Analysis of powertrain sound radiation behaviour by means of wave based technique

Rejlek, J., Priebsch, H-H. & Reich, F. M., 2010, Proceedings of the 6th International Styrian Noise, Vibration & Harshness Congress. ., p. 1-18

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Application of WBT for unbounded acoustic radiation problems with an approach for substitution of complex boundary shapes

Elbahnasy, I., Mocsai, T., Silar, P. & Priebsch, H-H., 2010, Proceedings of ISMA 2010. ., p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation and modelling of catalytic converter acoustical proberties in time domain

Elnemr, Y., Priebsch, H-H., Guo, Y., Dolinar, A. & Fairbrother, R., 2010, ICSV 17. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Multi-body Dynamics Based Gear Mesh Models for Prediction of Gear Dynamics and Transmission Error

Neusser, Z., Sopouch, M., Schaffner, T. & Priebsch, H-H., 2010, Transmission and Driveline 2010. ., p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Parameteridentifikation von visko-elasitischen Materialien und FE-Simulation für die Anwendung zur Geräuschminderung im Schienenverkehr

Jalics, K., Priebsch, H-H., Weidinger, P. & Schleinzer, G., 2010, Deutsche Jahrestagung für Akustik. ., p. 239-240

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Power train model refinement linked with parameter updating through nonlinear optimization

Girstmair, J., Priebsch, H-H., Reich, F. M. & Zehetner, J., 2010, 6th International Styrian Noise, Vibration & Harshness Congress. ., p. ?-?

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Refined Simulation of Friction Power Loss in Crank Shaft Slider Bearings Considering Wear in the Mixed Lubrication Regime

Priestner, C., Allmaier, H., Priebsch, H-H. & Forstner, C., 2010, 37th Leeds-Lyon Symposium on Tribology. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulation der Schwingungsanregung im Bereich der Hinterachse am Beispiel eines 4WD Mitellklasse PKW

Girstmair, J., Priebsch, H-H. & Reich, F. M., 2010, Proceedings AAC 2010. ., p. 177-188

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulation von Ventiltriebsverlusten in Großmotoren

Priestner, C., Six, C., Priebsch, H-H., Reich, F. M., Calvert, I., Anderson, B. & Gebhard, T., 2010, Proceedings of the ECS Konferenz 2010. ., p. 1-26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The application of the Wave Based Technique for 3D free-field radiation calculation using a residual error controlled adaptive strategy

Mocsai, T., Diwoky, F. & Priebsch, H-H., 2010, Proceedings of ISMA 2010. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Vibro-acoustic simulation of aluminium foam parts multi-scale technique

Karas, L., Jalics, K. & Priebsch, H-H., 2010, Cellular Materials. Dresden: Fraunhofer IFAM, p. 245-251

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Wave based technique for the analysis of fully coupled structural-acoustic unbounded problems

Rejlek, J. & Priebsch, H-H., 2010, ISMA 2010. ., p. 2407-2424

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2009

Application of the Wave Based Technique to Predict the Engine Noise Radiation Under anechoic Conditions

Hepberger, A., Priebsch, H-H., Diwoky, F. & Pramberger, H., 2009, Proceedings of the Noise and Vibration Conference and Exhibition. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Engine Radiation Simulation up to 3 khz using the Wave Based Technique

Mocsai, T., Priebsch, H-H., Diwoky, F. & Hepberger, A., 2009, The 16th Int. Congress on Sound and Vibration. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Potenzial zur Minderung des Motorgeräusches bei Verwendung von hochdämpfendem Material für die Bauteilkonstruktion

Jalics, K., Priebsch, H-H., Brandl, F., Andres, O. & Fingerhut, H-P., 2009, Aachener Akustik-Kolloquium. ., p. 69-77

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Power Train Model Characteristics for Vibration Analyses - Conflicting Demands in Off Line and HiL Environments

Girstmair, J., Priebsch, H-H., Reich, F. M. & Prezel, D., 2009, SAE 2009-01-2072. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Wave Based Prediction Technique for Sound Radiation Analysis

Rejlek, J., Mocsai, T., Silar, P., Hepberger, A. & Priebsch, H-H., 2009, NAG/DAGA 2009. ., p. 206-209

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2008

(Kopie von) Investigations on potential improvements of the Wave Based Technique for the application to radiation problems under anechoic conditions

Mocsai, T., Hepberger, A., Diwoky, F. & Priebsch, H-H., 2008, (Kopie von) Proceedings of ISMA 2008. ., p. 1547-1561

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Application of the Wave Based Method to 3D Radiation Problems

Diwoky, F., Hepberger, A., Mocsai, T., Pramberger, H. & Priebsch, H-H., 2008, Proceedings of the 5th Int. Workshop on Trefftz Methods LSAME. ., p. 157-172

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Application of the Wave Based Technique for steady-state semi-infinite sound radiation analysis

Rejlek, J., Pluymers, B., Hepberger, A., Priebsch, H-H. & Desmet, W., 2008, Proceedings of the 5th Int. Workshop on Trefftz Methods, LSAME. ., p. 349-364

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Challenges and New Solutions for Transfer Path Analysis

Brandl, S., Priebsch, H-H., Brandl, F., Biermayer, W., Höldrich, R. & Sontacchi, A., 2008, Proceedings of ISMA 2008. ., p. 3627-3641

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Efficient Intake- and Exhaust Noise Optimisation based on Simulation Results

Biermayer, W., Brandl, F., Dolinar, A. & Priebsch, H-H., 2008, JSAE Annual Congress. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Efficient Transfer Path Analysis for Vehicle Sound Engineering

Biermayer, W., Brandl, F., Höldrich, R., Sontacchi, A., Priebsch, H-H. & Brandl, S., 2008, JSAE Annual Congress. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Investigations on potential improvements of the Wave Based Technique for the application to radiation problems under anechoic conditions

Mocsai, T., Hepberger, A., Diwoky, F. & Priebsch, H-H., 2008, Proceedings of ISMA 2008. ., p. 1547-1561

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Optimised TPA approach for improving interior sound engineering

Brandl, S., Priebsch, H-H., Brandl, F., Biermayer, F., Höldrich, R. & Sontacchi, A., 2008, Optimising NVA in future vehicles. Graz: ACC - Ges. für Akustikforschung, p. 185-194

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Stochastic influences with NVH-simulation

Rabofsky, A., Böhler, E., Priebsch, H-H., Bermann, W., Holthoff, H. & Lauber, B., 2008, Optimising NVH in Future Vehicles ; Proceedings. ., p. 247-256

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

TPA Schienenfahrzeuge - Körperschallübertragung Drehgestell

Arndt, R., Jalics, K., Schleinzer, G. & Priebsch, H-H., 2008, DAGA 2008. ., p. 803-804

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2007

Experimental investigations on the acoustic properties of some fundamental elements found in automotive exhaust mufflers

Dolinar, A., Fairbrother, R., Priebsch, H-H. & Boden, H., 2007, (Accepted/In press) Proceedings of Internoise. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Separation von Geräuschquellen am Motor – Anwendung einer neuen Software

Arndt, R., Priebsch, H-H., Brandl, F. & Knaus, K., 2007, (Accepted/In press) Magdeburger Symposium Motor- und Aggregateakustik. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

The application of a new software tool for separating engine combustion and mechanical noise excitation

Brandl, F., Veit, J., Arndt, R. & Priebsch, H-H., 2007, (Accepted/In press) SAE 2007 Noise and Vibration Conference and Exhibition. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Validation of the wave based technique for the analysis of 2D steady-state acoustic radiation problems

Rejlek, J., Pluymers, B., Diwoky, F., Hepberger, A., Priebsch, H-H. & Desmet, W., 2007, (Accepted/In press) International Conference on Engineering Dynamics. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2006

Analyses and assessment of the sensitivity of trim parameters on SEA simulation for interior noise reduction

Brandl, S., Hauer, I., Priebsch, H-H., Bartosch, T. & Volkwein, S., 2006, International Congress on Sound and Vibration. Wien: ., p. 279-287

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Direct hybrid coupled finite element – wave based for 3D steady-state acoustic analysis

Silar, P., Hepberger, A., Priebsch, H-H., Pramberger, H. & Bartosch, T., 2006, Noise and Vibration Engineering. Haverlee: Katholieke Univ. Leuven, Dep. Werktuigkunde, p. 1447-1456 (Proceedings of ISMA).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Flexible Multi-body Dynamics Simulation – A Powerful Method for Prediction of Structure Borne Noise of Internal Combustion Engines

Offner, G. & Priebsch, H-H., 2006, Noise and Vibration Engineering. Sas, P. (ed.). Haverlee: Katholieke Univ. Leuven, Dep. Werktuigkunde, p. 2663-2676 (Proceedings of ISMA).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Impedance Identification out of Pressure Data’s with a hybrid Measurement-Simulation Methodology up to 1kHz

Hepberger, A., Volkwein, S., Diwoky, F. & Priebsch, H-H., 2006, Noise and Vibration Engineering. Sas, P. (ed.). Haverlee: Katholieke Univ. Leuven, Dep. Werktuigkunde, p. 4513-4524 (Proceedings of ISMA).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mathematical Optimization for Vehicle Trim in the High Frequency Range

Brandl, S., Hauer, I., Glettler, A., Priebsch, H-H. & Bartosch, T., 2006, Styrian Noise, Vibration & Harshness Congress. ., Vol. 4. p. 161-172 (Sound in motion).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2004

Application of Wave Based Technique for a cavity

Hepberger, A., Diwoky, F., Jalics, K. & Priebsch, H-H., 2004, International Conference on Noise and Vibration Engineering. Sas, P. (ed.). ., p. 1501-1512

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Chain Noise Excitation in Combustion Engines – Numerical Simulation and Verification of Different Chain Types

Schaffner, T., Sopouch, M. & Priebsch, H-H., 2004, Noise and Vibration Engineering. Sas, P. (ed.). Heverlee: Katholieke Univ. Leuven, Dep. Werktuigkunde, p. 975-990 (Proceedings of ISMA).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Experimental validation of wave based prediction technique for the analysis of the coupled vibro-acoustic behaviour of a 3D cavity

Pluymers, B., Hepberger, A., Desmet, W., Priebsch, H-H., Vandepit, D. & Sas, P., 2004, Advances in probabilistic mechanics and stuctural reliability. Orando, Fla.: Elsevier B.V., p. 81-84

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Quality and validation of cranktrain vibration predictions - Effect of hydrodynamic journal bearing models

Offner, G., Ma, M-T., Karlsson, U., Wikström, A., Loibnegger, B. & Priebsch, H-H., 2004, Multi-body dynamics: monitoring and simulation techniques - III. London: Professional Engineering Publ., p. 101-112

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2003

Advantages of Prediction Techniques up to 1 kHz for Vehicle Development

Priebsch, H-H. & Fankhauser, C., 2003, Styrian Noise, Vibration & Harshness Congress. Graz: ., p. 14-1-14-15 (Sound in Motion).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Simulation and Optimisation of Engine Noise – Predictive Input for the Development Process

Priebsch, H-H. & Resch, T., 2003, Proceedings of 16th Rieter Automotive Conference. ., p. A1401-A1417

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2002

Application of the Wave Based Method for the Steady-state Acoustic Response Prediction of a Car Cavity in the Mid-frequency Range

Hepberger, A., Priebsch, H-H., Desmet, W., van Hal, B., Pluymers, B. & Sas, P., 2002, Noise and Vibration Engineering. Sas, P. (ed.). Haverlee: Katholieke Univ. Leuven, Dep. Werktuigkunde, p. 877-884 (Proceedings of ISMA).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

High performance implementation and conceptual development of the wave based method for steady-state dynamic analysis of acoustic problems

van Hal, B., Hepberger, A., Priebsch, H-H., Desmet, W. & Sas, P., 2002, Noise and Vibration Engineering. Sas, P. (ed.). Haverlee: Katholieke Univ. Leuven, Dep. Werktuigkunde, p. 817-826 (Proceedings of ISMA).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Numerical Simulation and Verification of Mechanical Noise Generation in Combustion Engines

Priebsch, H-H., Herbst, H., Offner, G. & Sopouch, M., 2002, Noise and Vibration Engineering. Sas, P. (ed.). Haverlee: Katholieke Univ. Leuven, Dep. Werktuigkunde, p. 2021-2030 (Proceedings of ISMA).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File
2001

A Methodology to Simulate Piston Secondary Movement under Lubricated Contact Conditions

Offner, G., Herbst, H. & Priebsch, H-H., 2001, SAE TEchnical Paper series. Society of Automotive Engineers, p. 1-10 (Sae 2001 World Congress).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Numerical Simulation of Vehicle Interior Noise up to 250 Hz

Priebsch, H-H., Fellner, H., Hauer, I., Polt, G. & Brandl, F., 2001, Proceedings od Styrian Noise, Vibration & Harshness Congress. Graz: ., Vol. 1. p. 149-162 (Sound in Motion).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File