No photo of Hans-Herwig Priebsch

Hans-Herwig Priebsch

Ao.Univ.-Prof.i.R. Dipl.-Ing. Dr.techn.

1979 …2016
If you made any changes in Pure these will be visible here soon.

Research Output 1979 2016

2016

Automotive NVH Technology

Fuchs, A., Nijman, E. & Priebsch, H-H., 2016, Springer. 117 p. (SpringerBriefs in Applied Sciences and Technology. Automotive Engineering: Simulation and Validation Methods)

Research output: Book/ReportAnthologyResearchpeer-review

Friction and wear in automotive journal bearings operating in today's severe conditions

Sander, D. E., Allmaier, H. & Priebsch, H-H., 26 Oct 2016, Advances in Tribology. Darji, P. H. (ed.). Rijeka: InTech, p. 143-172

Research output: Chapter in Book/Report/Conference proceedingChapterResearchpeer-review

2015

Edge loading and running-in wear in dynamically loaded journal bearings

Sander, D. E., Allmaier, H., Priebsch, H-H., Reich, F. M., Witt, M. & Skiadas, A., 2015, In : Tribology international. 92, p. 395-403

Research output: Contribution to journalArticleResearchpeer-review

Non-Newtonian and running-in wear effects in journal bearings operating under mixed lubrication

Allmaier, H., Sander, D. E., Priebsch, H-H., Witt, M., Füllenbach, T. & Skiadas, A., 2015, In : Proceedings of the Institution of Mechanical Engineers / J. 230, 2, p. 135-142

Research output: Contribution to journalArticleResearchpeer-review

Simulation of journal bearing friction in severe mixed lubrication – Validation and effect of surface smoothing due to running-in

Sander, D. E., Allmaier, H., Priebsch, H-H., Witt, M. & Skiadas, A., 2015, In : Tribology international. 96, p. 173-183

Research output: Contribution to journalArticleResearchpeer-review

2014

Impact of high pressure and shear thinning on journal bearing friction

Sander, D. E., Allmaier, H., Priebsch, H-H., Reich, F. M., Witt, M., Füllenbach, T., Skiadas, A., Brouwer, L. & Schwarze, H., 2014, In : Tribology international. 81, p. 29-37

Research output: Contribution to journalArticleResearchpeer-review

Towards a reliable friction prediction in automotive journal bearings

Sander, D. E., Allmaier, H., Priebsch, H-H., Reich, F. M., Witt, M., Füllenbach, N. V., Skiadas, A., Brouwer, L., Schwarze, H., Novotny-Farkas, F. & Priestner, C., 18 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2013

Possibilities for Improving the Drivability of Conventional and Hybrid Drivetrains

Girstmair, J., Priebsch, H-H. & Nijman, E., 2013, 13th Stuttgart International Symposium. Automotive and Engine Technology Volume 1 and 2. ., p. 79-96

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Predicting Friction Reliably and Accurately in Journal Bearings - Extending the EHD Simulation Model to TEHD

Allmaier, H., Priestner, C., Reich, F. M., Priebsch, H-H. & Novotny-Farkas, F., 2013, In : Tribology international. 58, p. 20-28

Research output: Contribution to journalArticleResearchpeer-review

2012

Application of the wave based technique for the exterior acoustic field of a simplified car mock-up

Parise, G., Silar, P., Priebsch, H-H., Miccoli, G., Bertolini, C. & Nizzoli, T., 2012, International Conference on Noise and Vibration Engineering. ., p. ?-?

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Application of the wave based technique for the exterior acoustic field of a simplified car mock-up

Parise, G., Silar, P., Priebsch, H-H., Miccoli, G., Bertolini, C. & Nizzoli, T., 17 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Optimierte Echtzeit- und Offline-Simulationsmodelle zur Analyse der Antriebsstrangdynamik und - akustik

Girstmair, J., Priebsch, H-H., Nijman, E. & Reich, F., 19 Mar 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Predicting Friction Reliably and Accuretely in Journal Bearings - The Importance of Extensive Oil-Models

Allmaier, H., Priestner, C., Priebsch, H-H., Forster, C. & Novotny - Farkas, F., 2012, In : Tribology international. 48, p. 93-101

Research output: Contribution to journalArticleResearchpeer-review

2011

Accurate and Reliable Friction Prediction in Journal Bearings: A Validated Approach

Allmaier, H., Priestner, C., Priebsch, H-H., Reich, F., Forstner, C. & Novotny-Farkas, F., 28 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Accurate and Reliable Friction Prediction in Journal Bearings: A Validated Approach

Allmaier, H., Priestner, C., Priebsch, H-H., Reich, F., Forstner, C. & Novotny-Farkas, F., 6 Sep 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Energy Efficiency Improvements in Large Stationary Gas Engines through Optimization of Oil Rheology supported by close-to-practice Simulation Methods

Priestner, C., Allmaier, H., Reich, F., Priebsch, H-H. & Novotny-Farkas, F., 6 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On the Use of the Wave Based Technique for a Three-Dimensional Noise Radiation Analysis of Coupled Vibro-Acoustic Problems

Rejlek, J. & Priebsch, H-H., 2011, SAE Paper-No. 2011-01-1713. ., p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Predicting Friction Reliably and Accurentely in Journal Bearings - A Systematic Validation of Simulation Results with Experimental Measurements

Allmaier, H., Priestner, C., Priebsch, H-H., Forstner, C. & Novotny-Farkas, F., 2011, In : Tribology international. 44, 10, p. 1151-1160

Research output: Contribution to journalArticleResearchpeer-review

Vibro-Acoustic Simulation of Aluminium Foam Parts Using Multiscale Technique

Karas, L., Jalics, K. & Priebsch, H-H., 2011, In : Advanced Engineering Materials. 11, 13, p. 1015-1018

Research output: Contribution to journalArticleResearchpeer-review

2010

Analysis of powertrain sound radiation behaviour by means of wave based technique

Rejlek, J., Priebsch, H-H. & Reich, F. M., 2010, Proceedings of the 6th International Styrian Noise, Vibration & Harshness Congress. ., p. 1-18

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Application of WBT for unbounded acoustic radiation problems with an approach for substitution of complex boundary shapes

Elbahnasy, I., Mocsai, T., Silar, P. & Priebsch, H-H., 2010, Proceedings of ISMA 2010. ., p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation and modelling of catalytic converter acoustical proberties in time domain

Elnemr, Y., Priebsch, H-H., Guo, Y., Dolinar, A. & Fairbrother, R., 2010, ICSV 17. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Multi-body Dynamics Based Gear Mesh Models for Prediction of Gear Dynamics and Transmission Error

Neusser, Z., Sopouch, M., Schaffner, T. & Priebsch, H-H., 2010, Transmission and Driveline 2010. ., p. 1-14

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Parameteridentifikation von visko-elasitischen Materialien und FE-Simulation für die Anwendung zur Geräuschminderung im Schienenverkehr

Jalics, K., Priebsch, H-H., Weidinger, P. & Schleinzer, G., 2010, Deutsche Jahrestagung für Akustik. ., p. 239-240

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Power train model refinement linked with parameter updating through nonlinear optimization

Girstmair, J., Priebsch, H-H., Reich, F. M. & Zehetner, J., 2010, 6th International Styrian Noise, Vibration & Harshness Congress. ., p. ?-?

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Reduzierung von Schwingungen und Geräuschen an Rad und Schiene - Modellentwicklung, Simulation und Optimierung

Jalics, K., Nemeth, I., Priebsch, H-H., Schleinzer, G., Ohenhen, G. & Weidinger, P., 2010, In : ZEVrail. 134, p. 2-9

Research output: Contribution to journalArticleResearch

Refined Simulation of Friction Power Loss in Crank Shaft Slider Bearings Considering Wear in the Mixed Lubrication Regime

Priestner, C., Allmaier, H., Priebsch, H-H. & Forstner, C., 2010, 37th Leeds-Lyon Symposium on Tribology. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulation der Schwingungsanregung im Bereich der Hinterachse am Beispiel eines 4WD Mitellklasse PKW

Girstmair, J., Priebsch, H-H. & Reich, F. M., 2010, Proceedings AAC 2010. ., p. 177-188

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulation von Ventiltriebsverlusten in Großmotoren

Priestner, C., Six, C., Priebsch, H-H., Reich, F. M., Calvert, I., Anderson, B. & Gebhard, T., 2010, Proceedings of the ECS Konferenz 2010. ., p. 1-26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The application of the Wave Based Technique for 3D free-field radiation calculation using a residual error controlled adaptive strategy

Mocsai, T., Diwoky, F. & Priebsch, H-H., 2010, Proceedings of ISMA 2010. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Vibro-acoustic simulation of aluminium foam parts multi-scale technique

Karas, L., Jalics, K. & Priebsch, H-H., 2010, Cellular Materials. Dresden: Fraunhofer IFAM, p. 245-251

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Wave based technique for the analysis of fully coupled structural-acoustic unbounded problems

Rejlek, J. & Priebsch, H-H., 2010, ISMA 2010. ., p. 2407-2424

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2009

Application of the Wave Based Technique to Predict the Engine Noise Radiation Under anechoic Conditions

Hepberger, A., Priebsch, H-H., Diwoky, F. & Pramberger, H., 2009, Proceedings of the Noise and Vibration Conference and Exhibition. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Effiziente und exakte Bestimmung der Übertragungscharakteristiken von Fahrzeugkarosserien

Priebsch, H-H., Brandl, F., Brandl, S., Höldrich, R. & Sontacchi, A., 2009, In : Automobiltechnische Zeitschrift. 11, 111, p. 818-825

Research output: Contribution to journalArticleResearch

Open Access
File

Elasto-Hydrodynamische Simulation von Gleitlagern

Priestner, C., Priebsch, H-H. & Calvert, I., 16 Jun 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Engine Noise Reduction Potential Applying High Damping Materials for Component Design

Jalics, K., Priebsch, H-H., Brandl, F., Andres, O. & Fingerhut, H-P., 24 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Engine Radiation Simulation up to 3 khz using the Wave Based Technique

Mocsai, T., Priebsch, H-H., Diwoky, F. & Hepberger, A., 2009, The 16th Int. Congress on Sound and Vibration. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Neues Verfahren zur Tonhaltigkeitsanalyse

Arndt, R., von Heymann, A., Priebsch, H-H. & Sontacchi, A., 15 Sep 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Potenzial zur Minderung des Motorgeräusches bei Verwendung von hochdämpfendem Material für die Bauteilkonstruktion

Jalics, K., Priebsch, H-H., Brandl, F., Andres, O. & Fingerhut, H-P., 2009, Aachener Akustik-Kolloquium. ., p. 69-77

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Power Train Model Characteristics for Vibration Analyses - Conflicting Demands in Off Line and HiL Environments

Girstmair, J., Priebsch, H-H., Reich, F. M. & Prezel, D., 2009, SAE 2009-01-2072. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Stochastic NVH-Calculation with Computing on Demand

Rabofsky, A., Böhler, E., Holthoff, H., Lauber, B., Bermann, W. & Priebsch, H-H., 26 May 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Wave Based Prediction Technique for Sound Radiation Analysis

Rejlek, J., Mocsai, T., Silar, P., Hepberger, A. & Priebsch, H-H., 2009, NAG/DAGA 2009. ., p. 206-209

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2008

(Kopie von) Investigations on potential improvements of the Wave Based Technique for the application to radiation problems under anechoic conditions

Mocsai, T., Hepberger, A., Diwoky, F. & Priebsch, H-H., 2008, (Kopie von) Proceedings of ISMA 2008. ., p. 1547-1561

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Alternative Fahrzeugkarosserien - Entwicklung eines Stahl-Spaceframe-Konzepts

Böhler, E., Kronsteiner, G., Priebsch, H-H., Bauer, M. & Wagner, G., 2008, In : Automobiltechnische Zeitschrift. 10, p. 878-884

Research output: Contribution to journalArticleResearch

Open Access
File

Application of the Wave Based Method to 3D Radiation Problems

Diwoky, F., Hepberger, A., Mocsai, T., Pramberger, H. & Priebsch, H-H., 2008, Proceedings of the 5th Int. Workshop on Trefftz Methods LSAME. ., p. 157-172

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Application of the Wave Based Technique for steady-state semi-infinite sound radiation analysis

Rejlek, J., Plymers, B., Hepberger, A., Priebsch, H-H. & Desmet, W., 2008, In : Computer assisted mechanics and engineering sciences. 15, p. 337-251

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Application of the Wave Based Technique for steady-state semi-infinite sound radiation analysis

Rejlek, J., Pluymers, B., Hepberger, A., Priebsch, H-H. & Desmet, W., 2008, Proceedings of the 5th Int. Workshop on Trefftz Methods, LSAME. ., p. 349-364

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Challenges and New Solutions for Transfer Path Analysis

Brandl, S., Priebsch, H-H., Brandl, F., Biermayer, W., Höldrich, R. & Sontacchi, A., 2008, Proceedings of ISMA 2008. ., p. 3627-3641

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File

Efficient Intake- and Exhaust Noise Optimisation based on Simulation Results

Biermayer, W., Brandl, F., Dolinar, A. & Priebsch, H-H., 2008, JSAE Annual Congress. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File