No photo of Gerhard Schickhofer

Gerhard Schickhofer

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2020
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

2019

Basic steel properties of self-tapping timber screws exposed to cyclic axial loading

Ringhofer, A., Augustin, M. & Schickhofer, G., 30 Jun 2019, In : Construction & building materials. 211, p. 207-216 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Steel
Timber
Fatigue of materials
Load limits
Bearing capacity

Investigations concerning screw press gluing (SPG) with special focus on CLT/GLT ribbed plates

Bratulic, K., Augustin, M. & Schickhofer, G., 2019, (Submitted).

Research output: Contribution to conferencePosterResearch

2018

[M]odul und Raster - Das n*[M] der Standardisierung und Vorfertigung

Schickhofer, G. & Ganster, K., 30 Aug 2018, Vorfertigen und Modularisieren im Holzbau. p. A-1-A-40 40 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Eurocode 5:2022 – Einführung in die neuen Abschnitte Brettsperrholz und Verstärkungen

Dietsch, P., Schickhofer, G., Brunauer, A., Tomasi, R., Hübner, U., Krenn, H., Mestek, P., Moosbrugger, T. & Wiegand, T., 5 Oct 2018, Karlsruher Tage 2018 - Holzbau: Forschung für die Praxis. Görlacher, R. & Sandhaas, C. (eds.). Karlsruhe, p. 65-84

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access

Influence of number of layers on embedment strength of dowel-type connections for glulam and cross-laminated timber

Tuhkanen, E., Mölder, J. & Schickhofer, G., 18 Sep 2018, In : Engineering Structures. 176, p. 361-368 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Modelling of a traditional bow and arrow: Material modelling and dynamic simulation

Baumann, G., Feist, F., Schickhofer, G. & Zimmer, S., 17 Oct 2018.

Research output: Contribution to conferencePaperResearch

Raumzellenbau in Holz-Massivbauweise: Ein aktuelles Forschungsthema an der TU Graz - gemeinschaftliches Forschungsprojekt

Schickhofer, G., 31 Aug 2018, Holz-Zentralblatt, 144, 34, p. 788-789 2 p.

Research output: Contribution to specialist publicationArticleResearch

2017

Axially Loaded Self-Tapping Screws in Solid Timber and Laminated Timber Products

Ringhofer, A., 22 May 2017, 599 p.

Research output: ThesisDoctoral ThesisResearch

Axially-loaded self-tapping screws in solid timber and laminated timber products

Ringhofer, A., Schickhofer, G. (ed.) & Brandner, R. (ed.), 2017, Graz: Verlag der Technischen Universität Graz. (Monographic Series TU Graz: Timber Engineering & Technology; vol. TET 5)

Research output: Book/ReportBookResearchpeer-review

Evaluation and approximation of timber connection properties for displacement-based analysis of CLT wall systems

Flatscher, G., May 2017

Research output: ThesisDoctoral ThesisResearch

Evaluation and approximation of timber connection properties for displacement-based analysis of CLT wall systems

Flatscher, G., Schickhofer, G. (ed.) & Brandner, R. (ed.), 2017, Graz: Verlag der Technischen Universität Graz. (Monographic Series TU Graz: Timber Engineering & Technology; vol. TET 6)

Research output: Book/ReportBookResearchpeer-review

Hauptkuppel der TU Graz nutzbar gemacht: Erhebliches Nutzungspotenzial in 130 Jahre altem Gebäude neu erschlossen

Schickhofer, G., 29 Sep 2017, Holz-Zentralblatt, 143, 39, p. 898 899 p.

Research output: Contribution to specialist publicationArticleResearch

Hygrothermische Langzeitmessung innerhalb einer Brettsperrholzwand im Sockelbereich – erste Ergebnisse

Ganster, K. & Schickhofer, G., 2017, Stahlbau, Holzbau und Verbundbau. p. 355-368 14 p.

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

2016

Basic and Special Design Concepts of CLT Elements loaded out-of-plane

Schickhofer, G., Thiel, A. & Dröscher, J., 25 Feb 2016. 46 p.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

BIRCH | GLT+CLT - Mechanical properties of Glued Laminated Timber and Cross Laminated Timber produced with the wood species birch

Jeitler, G., Augustin, M. & Schickhofer, G., 22 Aug 2016, WCTE 2016: World Conference on Timber Engineering. Technische Universität Wien, 8 p. MS1-07:2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Building a building inside a building - CLT pre-fab solutions for fast growing cities are on the rise

Schickhofer, G., Flatscher, G. & Ringhofer, A., 24 Feb 2016. 50 p.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Building Services for Multi-Storey Residential Buildings and Detached Houses in CLT

Schickhofer, G., 26 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Combinded loading of self-tapping screws

Laggner, T. M., Flatscher, G. & Schickhofer, G., Aug 2016. 9 p.

Research output: Contribution to conferencePaperResearch

Comparison of Verification and Reinforcement Concepts for Timber Beams with Large Round Holes

Dröscher, J., Augustin, M. & Schickhofer, G., 24 Aug 2016. 10 p.

Research output: Contribution to conferencePaperResearch

Cross laminated timber (CLT): overview and development

Brandner, R., Flatscher, G., Ringhofer, A., Schickhofer, G. & Thiel, A., Mar 2016, In : European Journal of Wood and Wood Products. 74, 3

Research output: Contribution to journalArticleResearchpeer-review

Der Einsatz des Götterbaums im Baubereich

Müller, U., Brandner, R. & Schickhofer, G., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Displacement-Based Determination of Laterally Loaded Cross Laminated Timber (CLT) Wall Systems

Flatscher, G. & Schickhofer, G., 17 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Displacement-Based Determination of Laterally Loaded Cross Laminated Timber (CLT) Wall Systems

Flatscher, G. & Schickhofer, G., 2016, INTER - International Network on Timber Engineering Research. 19 p. INTER/49-12-1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Durchbrüche in Tragstrukturen aus BSH und BSP

Dröscher, J., Schickhofer, G. & Augustin, M., 2016, Graz: .

Research output: Book/ReportOther reportResearch

Durchbrüche in Tragstrukturen aus BSH und BSP

Dröscher, J., Augustin, M. & Schickhofer, G., 1 Sep 2016, VERSORGEN und UMHÜLLEN im Holzbau: Schnittstellen des Holzbaus zur Gebäude- und Fassadentechnik. 170 ed. Verlag der Technischen Universität Graz, 20 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Durchbrüche in Tragstrukturen aus BSH und BSP

Dröscher, J., Augustin, M. & Schickhofer, G., 1 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Elastic Constants of Cross Laminated Timber Panels of Industrial Size: Non-Destructive Measurement and Verification

Zhou, J., Chui, Y. H., Schickhofer, G. & Frappier, J., 24 Aug 2016, WCTE 2016: World Conference on Timber Engineering. Technische Universität Wien, 8 p. 461_a

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimental investigations and design provisions of steel-to-timber joints with annular-ringed shank nails for Cross-Laminated Timber structures

Izzi, M., Flatscher, G., Fragiacomo, M. & Schickhofer, G., 2016, In : Construction & building materials. 122, p. 446-457 12 p.

Research output: Contribution to journalArticleResearchpeer-review

External thermal insulation composite systems in solid timber construction

Günther, S., Ringhofer, A. & Schickhofer, G., 23 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

External thermal insulation composite systems in solid timber construction

Günther, S., Ringhofer, A. & Schickhofer, G., 22 Aug 2016, CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016). Eberhardsteiner, J., Winter, W., Fadai, A. & Pöll, M. (eds.). Technische Universität Wien, p. 1-10 10 p. GS3-02:5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Finite element modelling of the cyclic behaviour of CLT connectors and walls

Aranha, C., Branco, J., Lorenco, P., Flatscher, G. & Schickhofer, G., Aug 2016. 8 p.

Research output: Contribution to conferencePaperResearch

Hyllningsskrift till: Modularization of solid timber construction with CLT - analysis and assembly - Module "building services"

Ganster, K. & Schickhofer, G., 2016, Hyllningsskrift till. p. 43-55 13 p.

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Intoduction, Production and Technology of Cross Laminated Timber (CLT)

Schickhofer, G., 26 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Introduction to CLT, Product Properties, Strength Classes

Schickhofer, G., Brandner, R. & Bauer, H., Mar 2016, Cross laminated Timber – a competitive wood product for visionary and fire safe buildings: Joint Conference of COST Actions FP1402 and FP1404.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Introduction to CLT – product properties – strength classes

Schickhofer, G., Brandner, R. & Bauer, H., 10 Mar 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Lehre in Graz: Grundlagenfächer mit mehr Gewicht: Lehre und Forschung am Institut für Holzbau und Holztechnologie der TU Graz

Schickhofer, G., 26 Aug 2016, Holz-Zentralblatt, ISSN: 0018-3792, Verlag Weinbrenner, Leinfelden-Echterdingen, 142, 34, p. 840 841 p.

Research output: Contribution to specialist publicationArticleResearch

Mechanical characterisation of structural laminated bamboo

Sharma, B., Bauer, H., Schickhofer, G. & Ramage, M., 10 Oct 2016, In : Proceedings of the Institution of Civil Engineers / Structures and buildings. 169, 11, 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Methods of Forming Veneer Structures

Grabner, M., Wolf, A., Schwabl, E. & Schickhofer, G., 22 Aug 2016, WCTE 2016: World Conference on Timber Engineering. 10 p. 1027_a

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Methods of Forming Veneer Structures

Grabner, M., Wolf, A., Schwabl, E. & Schickhofer, G., 24 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Multi-Storey Residential Buildings in CLT - Interdisciplinary Principles of Design and Construction

Schickhofer, G., 26 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Product Properties and Strength Classes of CLT

Schickhofer, G., 26 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Reinforcement Concepts for Timber Beams with Large Round Holes

Dröscher, J., Augustin, M. & Schickhofer, G., 24 Aug 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Shear properties of cross laminated timber (CLT) under in-plane load: test configuration and experimental study

Brandner, R., Dietsch, P., Dröscher, J., Schulte-Wrede, M., Kreuzinger, H., Sieder, M., Schickhofer, G. & Winter, S., 2016, In : New Zealand Timber Design Journal. 24, 3, p. 14-27

Research output: Contribution to journalArticleResearchpeer-review

Test Configurations and Analysis for Determining Characteristic Properties of Cross Laminated Timber (CLT)

Schickhofer, G., 24 Aug 2016. 7 p.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

Test Configurations and Analysis for Determining Characteristic Properties of Cross Laminated Timber (CLT)

Bauer, H. & Schickhofer, G., 24 Aug 2016, WCTE 2016: World Conference on Timber Engineering. Technische Universität Wien, 7 p. GS1-01D:1

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The influences of moisture content variation, number and width of gaps on the withdrawal resistance of self tapping screws inserted in cross laminated timber

Silva, C., Branco, J., Ringhofer, A., Lourenco, P. B. & Schickhofer, G., 9 Sep 2016, In : Construction & building materials. 125, p. 1205-1215 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Verformungsbasierte Berechnung von lateral beanspruchten BSP Wandsystemen

Flatscher, G. & Schickhofer, G., 19 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Verformungsbasierte Berechnung von lateral beanspruchten BSP Wandsystemen

Flatscher, G. & Schickhofer, G., 20 Oct 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch