Georg Brasseur

Univ.-Prof. Dipl.-Ing. Dr.techn.

19992019
If you made any changes in Pure these will be visible here soon.

Research Output 1999 2019

Filter
Conference contribution
2019

Analysis of autoregressive coefficients of knock sensor signals for misfire detection in internal combustion engines

Rath, M., Wegleiter, H., Brasseur, G. & Basso, R., 1 May 2019, I2MTC 2019 - 2019 IEEE International Instrumentation and Measurement Technology Conference, Proceedings. Institute of Electrical and Electronics Engineers, 8827127. (Conference Record - IEEE Instrumentation and Measurement Technology Conference; vol. 2019-May).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Combustion knock
Internal combustion engines
Engines
Sensors
Polynomials
2018

Ion current measurement for parameter estimation in small two stroke engines

Gruber, G., Schweighofer, B., Brasseur, G. & Basso, R., 10 Jul 2018, I2MTC 2018 - 2018 IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement, Proceedings. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electric current measurement
strokes
Parameter estimation
ion currents
engines
2016

Model Based Monitoring of Ice Accretion on Overhead Power Lines

Bretterklieber, T., Neumayer, M., Flatscher, M., Becke, A. & Brasseur, G., 2016, I2MTC 2016 Proceedings. p. 803 807 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Comparison of Electric Energy Storages for Hybrid Racing Vehicles

Brasseur, G., Schweighofer, B. & Wegleiter, H., 2011, (Accepted/In press) 13th EAEC European Automotive Congress. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Model Verification and Parameter Evaluation for a Pneumatic Gauging Method for Vented Tanks

Brunnader, R., Holler, G. & Brasseur, G., 2011, Proceedings of the Instrumentation and Measurement Technology Conference (I2MTC). ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

Capacitive Icing Measurement in a 220 kV Overhead Power Line Environment

Moser, M. J., Bretterklieber, T., Zangl, H. & Brasseur, G., 2010, IEEE International Conference on Sensors. ., p. 1754-1757

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Robust sensing of human proximity for safety applications

Neumayer, M., George, B., Bretterklieber, T., Zangl, H. & Brasseur, G., 2010, IEEE Instrumentation and Measurement Technology Conference. ., p. 458-463

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2009

A Combined Inductive-Capacitive Proximity Sensor and Its Application to Seat Occupancy Sensing

George, B., Zangl, H., Bretterklieber, T. & Brasseur, G., 2009, IEEE Instrumentation and Measurement Technology Conference. Piscataway, NJ: Institute of Electrical and Electronics Engineers, p. 13-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of a combined capacitive flow velocity and density sensor for the measurement of liquid hydrogen mass flow

Holler, G., Hrach, D., Fuchs, A. & Brasseur, G., 2009, I2MTC 2009 - IEEE International Instrumentation and Measurement Technology Conference Proceedings. ., p. 1444-1448

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Capacitance Mismatch Correction for a Fluidic Inclinometer

Bretterklieber, T., Zangl, H. & Brasseur, G., 2009, IEEE Instrumentation and Measurement Technology Conference. ., p. 646-651

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Icing Detector for Overhead Power Transmission Lines

Moser, M. J., Zangl, H. & Brasseur, G., 2009, IEEE Instrumentation and Measurement Technology Conference. ., p. 1105-1109

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Particulate Solids Sensing Techniques

Brasseur, G. & Fuchs, A., 2009, (Accepted/In press) International Conference on Bulk Materials Storage, Handling and Transportation. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

A Novel Seat Occupancy Detection System Based on Capacitive Sensing Technology

George, B., Zangl, H., Bretterklieber, T. & Brasseur, G., 2008, IEEE Instrumentation and Measurement Technology Conference. ., p. 1515-1519

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Fill level measurement in a closed vessel by monitoring pressure variations due to thermodynamic equilibrium perturbation

Holler, G., Fuchs, A. & Brasseur, G., 2008, IEEE Instrumentation and Measurement Technology Conference Proceedings. ., p. 641-646

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Online Condition Monitoring of High Voltage Overhead Power Lines

Zangl, H., Bretterklieber, T. & Brasseur, G., 2008, IEEE Instrumentation and Measurement Technology Conference. ., p. 1364-1369

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Capacitive flowmeter for industrial dense-phase pneumatic conveying application

Fuchs, A., Zangl, H., Watzenig, D., Holler, G. & Brasseur, G., 2007, Sensor - Internationale Messe mit Kongress für Sensoren, Messsysteme und Solutions. ., p. 185-195

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mass flowmeter for screw conveyors based on capacitive sensing

Fuchs, A., Zangl, H. & Brasseur, G., 2007, IEEE Instrumentation and Measurement Technology Conference. ., p. 1-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On-line Estimation of Process Parameters in Multi-Phase Flows from Measured Electrical Capacitance Data

Watzenig, D., Steiner, G., Fuchs, A. & Brasseur, G., 2007, Proceedings of the International Trade Fair and Conference. ., p. 223-228

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Online measurement of the moisture content in waste by means of capacitive sensing.

Fuchs, A., Holler, G., Zangl, H., Wegleiter, H., Hrach, D. & Brasseur, G., 2007, ISEMA 2007. ., p. 97-104

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

Flow Property Determination in Homogeneous Media by Means of Perturbation Injection

Fuchs, A., Kortschak, B., Holler, G., Wegleiter, H. & Brasseur, G., 2005, IEEE International Conference on Sensors. ., p. 680-683

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Random-Data Cross-Correlator for Flow Measurement of Bulk Solids in Pneumatic Conveyor Pipes

Zangl, H., Fuchs, A., Brasseur, G. & Petriu, E., 2005, IEEE Instrumentation and Measurement Technology Conference. ., p. 1773-1778

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Robust inclination measurement with liquid based capacitive sensors

Bretterklieber, T., Zangl, H. & Brasseur, G., 2005, Proceedings of the 12th International Conference Sensor 2005. ., p. 399-404

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2004

A non-contact multi-turn angular position sensor

Zangl, H., Brasseur, G., Gallbrunner, M. & Griesser, G., 2004, ISA/IEEE Sensors for Industry Conference. ., p. 2-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Sensor Fusion Conception for Precise Mass Flow Measurement of Powdery Buld Material in Dense Phase Applications

Fuchs, A., Zangl, H. & Brasseur, G., 2004, International Conference on Bulk Materials Storage, Handling and Transportation. ., p. 266-370

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Tuning Transformer for the Automatic Adjustment of Resonant Loop Antennas in RFID Systems

Steiner, G., Zangl, H., Fulmek, P. & Brasseur, G., 2004, Proceedings of the IEEE International Conference on Industrial Technology (ICIT). ., Vol. Vol. 2. p. 912-916

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of Measurement Results and Simulations Based on Finite Element Method for an Electrical Capacitance Tomography System

Holler, G., Fuchs, A., Schweighofer, B. & Brasseur, G., 2004, ISA/IEEE Sensors for Industry Conference. ., p. 109-115

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Cross-Sectional Profile and Mass Measurement of Particulate Solids

Fuchs, A., Zangl, H. & Brasseur, G., 2004, ISA/IEEE Sensors for Industry Conference. ., p. 17-22

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design of an Eddy Current Based Crack Detection Sensor for Wire Precessing Application

Fuchs, A., Brasseur, G. & Häuselhofer, W., 2004, IEEE International Conference on Sensors. ., p. 840-843

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Random-Data Correlator Architecture for Flow Velocity Measurement Applications

Fuchs, A., Zangl, H., Brasseur, G. & Petriu, E., 2004, Robotics in the automotive industry. Piscataway, NJ: IEEE Service Center, p. 14-19

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2003

A bem-approach for simulation and optimization of capacitive sensor topologies

Zangl, H., Cermak, S., Brandstätter, B., Gruber, G. & Brasseur, G., 2003, (Submitted) Metrology in the 3rd millenium - XVII IMEKO World Congress ; proceedings. Dubrovnik: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Robust Planar Capacitive Sensor for Angular Measurement

Zangl, H., Cermak, S., Gruber, G. & Brasseur, G., 2003, Proceedings of the 11th International Conference Sensor 2003. ., p. 47-51

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mass Flow and Velocity Measurement of Amorphous Solids

Fuchs, A., Brandstätter, B., Schweighofer, B. & Brasseur, G., 2003, Sensor - Internationale Messe mit Kongress für Sensoren, Messsysteme und Solutions. ., p. 9-25

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mass Measurement on Non-Newtonian Substances in a Conveyor Pipe Based on Pulse Response Acquisition

Fuchs, A., Zangl, H., Brasseur, G. & Gölles, M., 2003, International Conference on Industrial Technology. ., p. 339-343

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Measurement of Velocity and Mass Flow of Powders

Fuchs, A., Brandstätter, B., Schweighofer, B. & Brasseur, G., 2003, IMEKO World Congress. ., p. 22-27

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical simulation of coherent light diffracted from rough surfaces

Thurner, T., Brandstätter, B. & Brasseur, G., 2003, (Submitted) Proceedings of the 20th IEEE Instrumentation and Measurement Technology Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

State of the Art of Robust Capacitive Sensors

Brasseur, G., Brandstätter, B. & Zangl, H., 2003, IEEE International Workshop on Robotic and Sensors Environments. ., p. 4-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2002

An incremental capacitive sensor for harsh environment

Brandstätter, B., Brasseur, G., Cermak, S., Zangl, H. & Fulmek, P. L., 2002, IEEE International Conference on Sensors. ., Vol. 2. p. 841-842

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Capacitive Blade Tip Clearance Measurement for a Micro Gas Turbine

Fabian, T., Kang, S., Tsuru, H., Prinz, F. & Brasseur, G., 2002, Frontier of instrumentation and measurement. ., p. 1011-1015

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Capacitive sensor for incremental angular measurement

Cermak, S., Brasseur, G., Zangl, H. & Fulmek, P. L., 2002, Proceedings of the ISA/IEEE Sensors for Industry Conference. Research Triangle Park, NC: ISA, Vol. 436. p. 115-118 (ISA volume).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design and Optimization of a Multi-Induction-Loop Access Control System

Brandstätter, B., Zangl, H., Cermak, S., Brasseur, G., Hollaus, K. & Biro, O., 2002, Proceedings of the International Symposium on Electromagnetic Compatibility. ., p. 883-888

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Inertial tracking for mobile augmented reality

Lang, P., Kusej, A., Pinz, A. & Brasseur, G., 2002, IEEE Instrumentation and Measurement Technology Conference. ., p. 1583-1587

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2001

Multispectral, spatially registered unwrapping of 3d surfaces applied to industrial inspection of fruits

Nestler, M., Ganster, H., Pinz, A. & Brasseur, G., 2001, International Conference on Quality Control by Artificial Vision. ., p. 153-157

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Novel industrial inspection with CMOS-cameras

Ganster, H., Nestler, M., Pinz, A. & Brasseur, G., 2001, Le Creusot, volume1. ., p. 214-218

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Signal Processing for Capacitive Angular Position Sensors by the Discrete Fourier Transform

Thurner, T., Cermak, S., Brasseur, G. & Fulmek, P. L., 2001, Proceedings of the 18th IEEE Instrumentation and Measurement Technology Conference. ., p. 1135-1138

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2000

Capacitive Sensor for Relative Angle Measurement

Cermak, S., Wandling, F., Zdiasky, W., Fulmek, P. & Brasseur, G., 2000, IEEE Instrumentation and Measurement Technology Conference. ., p. 830-833

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Cpacitive Sensor for Torque Measurement

Cermak, S., Wandling, F., Zdiarsky, W., Fulmek, P. & Brasseur, G., 2000, IMEKO World Congress. ., p. 25-28

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Defect detection for real-time grading of apples

Nestler, M., Ganster, H., Pinz, A. & Brasseur, G., 2000, Applikation of 3D-Imaging and Graph-Based Modeling. ., p. 161-168

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1999

HYC - A Hybrid Concept with Small Lean Burn Engine, Electrically Heated Catalyst and Asyncronous Motor for Enhanced Performance and ULEV Level Emissions

Laimböck, F. J., Kirchberger, R., Meister, G. F., Dorfstätter, M., Brasseur, G. & Trigg, R. V., 1999, (Submitted) SAE International. SAE International

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review