Georg Brasseur

Univ.-Prof. Dipl.-Ing. Dr.techn.

19992019
If you made any changes in Pure these will be visible here soon.

Research Output 1999 2019

2019

Analysis of autoregressive coefficients of knock sensor signals for misfire detection in internal combustion engines

Rath, M., Wegleiter, H., Brasseur, G. & Basso, R., 1 May 2019, I2MTC 2019 - 2019 IEEE International Instrumentation and Measurement Technology Conference, Proceedings. Institute of Electrical and Electronics Engineers, 8827127. (Conference Record - IEEE Instrumentation and Measurement Technology Conference; vol. 2019-May).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Combustion knock
Internal combustion engines
Engines
Sensors
Polynomials
2018

Ion current measurement for parameter estimation in small two stroke engines

Gruber, G., Schweighofer, B., Brasseur, G. & Basso, R., 10 Jul 2018, I2MTC 2018 - 2018 IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement, Proceedings. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electric current measurement
strokes
Parameter estimation
ion currents
engines
2017

AC power measurements of electric drives: a method incorporating calorimetry and DC measurements only

Lindenthaler, D. & Brasseur, G., Apr 2017, In : e&i - Elektrotechnik und Informationstechnik. 134, 2, p. 197-202 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Electric drives
Calorimetry

A model-based design approach for an electro-hydraulic system within automatic transmissions

Ebner, W., Fuchs, J. & Brasseur, G., 2017, p. 7868. 7873 p.

Research output: Contribution to conference(Old data) Lecture or PresentationResearchpeer-review

A model-based design approach for an optimal electro-hydraulic system within automatic transmissions

Ebner, W., Fuchs, J. & Brasseur, G., 1 Jul 2017, In : IFAC-PapersOnLine. 50, 1, p. 7606-7612 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Hydraulics
Lubrication
Cooling
Clutches
Multiobjective optimization

Wirkleistungsmessung im elektrischen Antrieb zwischen Motor und Umrichter

Lindenthaler, D. & Brasseur, G., 26 Apr 2017.

Research output: Contribution to conferencePosterResearch

2016

Model Based Monitoring of Ice Accretion on Overhead Power Lines

Bretterklieber, T., Neumayer, M., Flatscher, M., Becke, A. & Brasseur, G., 2016, I2MTC 2016 Proceedings. p. 803 807 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Signal-Bandwidth Evaluation for Power Measurements in Electric Automotive Drives

Lindenthaler, D. & Brasseur, G., 2015, In : IEEE Transactions on Instrumentation and Measurement. 64, 6, p. 1336-1343

Research output: Contribution to journalArticleResearchpeer-review

2014

Biomass measurement of living Lumbriculus variegatus with impedance spectroscopy

Sammer, M., Laarhoven, B., Mejias, E., Yntema, D., Fuchs, E., Holler, G., Brasseur, G. & Lankmayr, E., 2014, In : Journal of Electrical Bioimpedance. 5, p. 92-98

Research output: Contribution to journalArticleResearch

2011

Comparison of Electric Energy Storages for Hybrid Racing Vehicles

Brasseur, G., Schweighofer, B. & Wegleiter, H., 2011, (Accepted/In press) 13th EAEC European Automotive Congress. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Model Verification and Parameter Evaluation for a Pneumatic Gauging Method for Vented Tanks

Brunnader, R., Holler, G. & Brasseur, G., 2011, Proceedings of the Instrumentation and Measurement Technology Conference (I2MTC). ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Vergleich unterschiedlicher Energiespeichersysteme für Hybridnahverkehrsbusse

Wegleiter, H., Schweighofer, B. & Brasseur, G., 27 Sep 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2010

A Combined Inductive–Capacitive Proximity Sensor for Seat Occupancy Detection

George, B., Zangl, H., Bretterklieber, T. & Brasseur, G., 2010, In : IEEE Transactions on Instrumentation and Measurement. 59, 5, p. 1463-1470

Research output: Contribution to journalArticleResearchpeer-review

Capacitive Icing Measurement in a 220 kV Overhead Power Line Environment

Moser, M. J., Bretterklieber, T., Zangl, H. & Brasseur, G., 2010, IEEE International Conference on Sensors. ., p. 1754-1757

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Flywheels for Drive Systems

Brasseur, G., Schweighofer, B. & Wegleiter, H., 18 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Robust sensing of human proximity for safety applications

Neumayer, M., George, B., Bretterklieber, T., Zangl, H. & Brasseur, G., 2010, IEEE Instrumentation and Measurement Technology Conference. ., p. 458-463

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Untersuchung der Machbarkeit der Online-Erkennung von Rissdefekten an Wellen

Deinhammer, C., Brandner, M., Fulmek, P., Schweighofer, B., Wegleiter, H. & Brasseur, G., 2010, .

Research output: Book/ReportOther reportResearch

2009

A Combined Inductive-Capacitive Proximity Sensor and Its Application to Seat Occupancy Sensing

George, B., Zangl, H., Bretterklieber, T. & Brasseur, G., 2009, IEEE Instrumentation and Measurement Technology Conference. Piscataway, NJ: Institute of Electrical and Electronics Engineers, p. 13-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

A Laboratory Prototype for an Icing Detection Measurement System on High Voltage Overhead Power Lines

Moser, M. J., George, B., Bretterklieber, T., Zangl, H. & Brasseur, G., 2009, .

Research output: Book/ReportOther reportResearch

An Autonomous Sensor System for Monitoring of High Voltage Overhead Power Supply Lines

Moser, M. J., Zangl, H., Bretterklieber, T. & Brasseur, G., 2009, In : e&i - Elektrotechnik und Informationstechnik. 126, 5, p. 214-219

Research output: Contribution to journalArticleResearchpeer-review

Application of a combined capacitive flow velocity and density sensor for the measurement of liquid hydrogen mass flow

Holler, G., Hrach, D., Fuchs, A. & Brasseur, G., 2009, I2MTC 2009 - IEEE International Instrumentation and Measurement Technology Conference Proceedings. ., p. 1444-1448

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Capacitance Mismatch Correction for a Fluidic Inclinometer

Bretterklieber, T., Zangl, H. & Brasseur, G., 2009, IEEE Instrumentation and Measurement Technology Conference. ., p. 646-651

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Condition monitoring of Lithium-Ion Batteries for electric and hybrid electric vehicles

Sternad, M., Cifrain, M., Watzenig, D., Brasseur, G. & Winter, M., 2009, In : e&i - Elektrotechnik und Informationstechnik. 5, p. 186-193

Research output: Contribution to journalArticleResearchpeer-review

Icing Detector for Overhead Power Transmission Lines

Moser, M. J., Zangl, H. & Brasseur, G., 2009, IEEE Instrumentation and Measurement Technology Conference. ., p. 1105-1109

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Online Condition Monitoring of High Voltage Overhead Power Lines

Moser, M. J., George, B., Zangl, H., Bretterklieber, T. & Brasseur, G., 2009.

Research output: Contribution to conferencePosterResearch

Particulate Solids Sensing Techniques

Brasseur, G. & Fuchs, A., 2009, (Accepted/In press) International Conference on Bulk Materials Storage, Handling and Transportation. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Seat Occupancy Detection based on Capacitive Sensing

George, B., Zangl, H., Bretterklieber, T. & Brasseur, G., 2009, In : IEEE Transactions on Instrumentation and Measurement. 58, 5, p. 1487-1494

Research output: Contribution to journalArticleResearchpeer-review

2008

A Novel Seat Occupancy Detection System Based on Capacitive Sensing Technology

George, B., Zangl, H., Bretterklieber, T. & Brasseur, G., 2008, IEEE Instrumentation and Measurement Technology Conference. ., p. 1515-1519

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Design and analysis of a capacitive moisture sensor for municipal solid waste.

Fuchs, A., Zangl, H., Holler, G. & Brasseur, G., 2008, In : Measurement science & technology. 19, 2, p. 9-pp

Research output: Contribution to journalArticleResearchpeer-review

Energy Storage Systems for Hybrid Vehicles; from Racing to Production cars

Brasseur, G., Sternad, M. & Kren, H., 21 Oct 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Feldstudie Röthis zur Funktionsweise des WLM-SYSTEMs

Kölbl, J., Wallinger, C. F., Zangl, H., Fuchs, A., Brasseur, G. & Kainz, H., 2008, Graz: .

Research output: Book/ReportOther reportResearch

Fill level measurement in a closed vessel by monitoring pressure variations due to thermodynamic equilibrium perturbation

Holler, G., Fuchs, A. & Brasseur, G., 2008, IEEE Instrumentation and Measurement Technology Conference Proceedings. ., p. 641-646

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Online Condition Monitoring of High Voltage Overhead Power Lines

Zangl, H., Bretterklieber, T. & Brasseur, G., 2008, IEEE Instrumentation and Measurement Technology Conference. ., p. 1364-1369

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Vorrichtung zum Detektieren eines nahen Objektes

Zangl, H., George, B., Bretterklieber, T. & Brasseur, G., 23 Oct 2008, (Submitted)

Research output: PatentResearch

Capacitive flowmeter for industrial dense-phase pneumatic conveying application

Fuchs, A., Zangl, H., Watzenig, D., Holler, G. & Brasseur, G., 2007, Sensor - Internationale Messe mit Kongress für Sensoren, Messsysteme und Solutions. ., p. 185-195

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Capacitive Sensor and Measurement System

Zangl, H., Bretterklieber, T., Brasseur, G., Holler, G., Hammerschmidt, D., Motz, M. & Werth, T., 1 Dec 2007, (Submitted) Patent No. DE 102008061225 A1

Research output: PatentResearch

Förderparameterbestimmung in Pneumatischen Dünnstrom Transportanwendungen

Fuchs, A., Zangl, H. & Brasseur, G., 2007, In : Technisches Messen. 74, 4, p. 185-195

Research output: Contribution to journalArticleResearchpeer-review

Kapazitätssensor

Zangl, H., Bretterklieber, T., Brasseur, G., Holler, G., Hammerschmidt, D., Motz, M. & Werth, T., 1 Dec 2007, (Submitted) Patent No. DE 102007058707 A1

Research output: PatentResearch

Mass flowmeter for screw conveyors based on capacitive sensing

Fuchs, A., Zangl, H. & Brasseur, G., 2007, IEEE Instrumentation and Measurement Technology Conference. ., p. 1-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On-line Estimation of Process Parameters in Multi-Phase Flows from Measured Electrical Capacitance Data

Watzenig, D., Steiner, G., Fuchs, A. & Brasseur, G., 2007, Proceedings of the International Trade Fair and Conference. ., p. 223-228

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Online measurement of the moisture content in waste by means of capacitive sensing.

Fuchs, A., Holler, G., Zangl, H., Wegleiter, H., Hrach, D. & Brasseur, G., 2007, ISEMA 2007. ., p. 97-104

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Verfahren und Vorrichtung zur Bestimmung der Füllmenge

Brasseur, G., Fuchs, A., Holler, G. & Zangl, H., 13 Apr 2007, (Submitted)

Research output: PatentResearch

Verfahren zur automatischen Kalibrierung kapazitiver Sensoren

Zangl, H., Bretterklieber, T. & Brasseur, G., 1 Aug 2007, (Submitted) Patent No. WO 2009/015404 A2

Research output: PatentResearch

Vorrichtung zum Messen der Strömungsgeschwindigkeit eines Massenflusses

Brasseur, G. & Fuchs, A., 15 Jan 2007, Patent No. AT 500674

Research output: PatentResearch