Franz Heitmeir

Univ.-Prof. Dr.-Ing.

19952020
If you made any changes in Pure these will be visible here soon.

Research Output 2002 2018

2018

Acoustic, Aerodynamic and Aeroelastic Comparison of Different Low Pressure Turbine Exit Guide Vane Designs

Zenz, M., Simonassi, L., Selic, T., Schönleitner, F., Heitmeir, F. & Marn, A., 13 Jun 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Aerodynamic performance of turbine center frames with purge flows-part I: The influence of turbine purge flow rates

Zerobin, S., Peters, A., Bauinger, S., Ramesh, A. B., Steiner, M., Heitmeir, F. & Göttlich, E., 1 May 2018, In : Journal of Turbomachinery. 140, 6, 061009.

Research output: Contribution to journalArticleResearchpeer-review

Aerodynamics
Turbines
Flow rate
Struts
Ducts

Aerodynamic performance of turbine center frames with purge flows-part II: The influence of individual hub and tip purge flows

Zerobin, S., Aldrian, C., Peters, A., Heitmeir, F. & Göttlich, E., 1 May 2018, In : Journal of Turbomachinery. 140, 6, 061010.

Research output: Contribution to journalArticleResearchpeer-review

Aerodynamics
Turbines
Ducts
Rotors
Flow rate

Experimental Investigation of Boundary Layer Relaminarization in Accelerated Flow

Bader, P., Pschernig, M., Sanz, W., Woisetschläger, J., Heitmeir, F., Brenn, G. & Meile, W., 2018, In : Journal of Fluids Engineering. 140, 8, 15 p., 081201.

Research output: Contribution to journalArticleResearchpeer-review

Impact of Purge Flows on the Unsteady HPT Stator-Rotor Interaction

Zerobin, S., Peters, A., Marn, A., Heitmeir, F. & Göttlich, E., 2018, Proceedings of GPPS Forum 18. 10 p. GPPS2018-0026

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the Influence of an Acoustically Optimized Turbine Exit Casing onto the Unsteady Flow Field Downstream of a Low Pressure Turbine Rotor

Simonassi, L., Zenz, M., Zerobin, S., Selic, T., Heitmeir, F. & Marn, A., Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers (ASME), Vol. 2A: Turbomachinery. 12 p. Paper No. GT2018-76725

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Unsteady flow
Flow fields
Turbines
Rotors
Aerodynamics

On the Modal Analysis of Fast Response Aerodynamic Pressure Probe Data

Simonassi, L., Zenz, M., Zerobin, S., Selic, T., Heitmeir, F. & Marn, A., Aug 2018. 8 p.

Research output: Contribution to conferencePaperResearch

Modal analysis
Aerodynamics
Turbines
Rotors
Secondary flow

Steady CFD Simulation of a High Pressure Turbine Rotor with Hub and Shroud Purge Flow

Sanz, W., Zerobin, S., Egger, M., Pieringer, P., Göttlich, E. & Heitmeir, F., 2018.

Research output: Contribution to conferencePaperResearchpeer-review

2017

Comparison of numerical forced response predictions with experimental results obtained in a subsonic test turbine facility

Marn, A., Schönleitner, F., Mayr, M. & Heitmeir, F., 2017, In : Technische Mechanik. 37, 2-5, p. 139-150 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Turbines
Rotors
Engines
Turbomachine blades
Stators

Experimental Determination of the Effectiveness of a Sound Absorbing Turbine Exit Casing

Zenz, M., Schönleitner, F., Simonassi, L., Bauinger, S., Broszat, D., Heitmeir, F. & Marn, A., 2017, Proceedings of 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Impact of Individual High-Pressure Turbine Rotor Purge Flows on Turbine Center Frame Aerodynamics

Zerobin, S., Aldrian, C., Peters, A., Heitmeir, F. & Göttlich, E., 2017, Proceedings of the ASME Turbo Expo. American Society of Mechanical Engineers (ASME), Vol. 2A. GT2017-63616

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of backward-and forward-facing steps on the flow through a turning mid turbine frame

Bauinger, S., Goettlich, E., Heitmeir, F. & Malzacher, F., 1 Dec 2017, In : Journal of Turbomachinery. 139, 12, 121005.

Research output: Contribution to journalArticleResearchpeer-review

Turbines
Rotors
Ducts
Engines
3D printers

Influence of measurement grid resolution on duct loss evaluation

Zerobin, S., Steiner, M., Bauinger, S., Marn, A., Göttlich, E. & Heitmeir, F., 2017, 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics. ETC2017-150

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Influence of Operational Geometry Changes on Turbine Acoustics

Bauinger, S., Zerobin, S., Marn, A., Göttlich, E. & Heitmeir, F., 2017, Proceedungs of the ASME Turbo Expo.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the influence of a five-hole-probe on the vibration characteristics of a low pressure turbine rotor while performing aerodynamic measurements

Schönleitner, F., Selic, T., Zenz, M., Heitmeir, F. & Marn, A., 2017, In : Technische Mechanik. 37, 2-5, p. 196-207 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Aerodynamics
Turbines
Rotors
Channel flow
Acoustics

On Turbulence Measurements and Analyses in a Two-Stage Two-Spool Turbine Rig

Bauinger, S., Behre, S., Lengani, D., Guendogdu, Y., Heitmeir, F. & Göttlich, E., Jul 2017, In : Journal of Turbomachinery. 139, 7, p. 071008-1-071008-11 11 p.

Research output: Contribution to journalArticleResearchpeer-review

The Behavior of Turbine Center Frames under the Presence of Purge Flows

Zerobin, S., Peters, A., Bauinger, S., Bhadravati Ramesh, A., Steiner, M., Heitmeir, F. & Göttlich, E., 2017, Proceedings of the ASME Turbo Expo. Vol. 2A-2017. GT2017-63606

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

The Unsteady Flow Field of a Purged High Pressure Turbine based on Mode Detection

Zerobin, S., Bauinger, S., Marn, A., Peters, A., Heitmeir, F. & Göttlich, E., 2017, Proceedings of the ASME Turbo Expo. Vol. 2D-2017. GT2017-63619

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2016

Acoustic Mode Analysis: Numerical and Experimental Results of a Turning Mid Turbine Frame

Zerobin, S., Bader, P., Faustmann, C., Marn, A., Göttlich, E. & Heitmeir, F., 2016, Proceedings of the ASME Turbo Expo. Vol. Volume 2A-2016. GT2016-57754

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of Flame Transfer Functions acquired by Chemiluminescence and Density Fluctuation Measurements

Peterleithner, J., Basso, R., Heitmeir, F., Woisetschläger, J., Schlüßler, R., Czarske, J. & Fischer, A., 2016, p. GT2016-57490.

Research output: Contribution to conferencePaperResearchpeer-review

Comparison of Measured and Computational Turbulence Data in a Two-Stage Two-Spool Turbine Test Rig

Bauinger, S., Bader, P., Göttlich, E., Sanz, W. & Heitmeir, F., Sep 2016.

Research output: Contribution to conferencePaperResearch

Detecting Transition in Flat Plate Flow with Laser Interferometric Vibrometry

Bader, P., Sanz, W., Peterleithner, J., Woisetschläger, J., Heitmeir, F., Meile, W. & Brenn, G., Jun 2016, p. ASME Paper GT2016-56043.

Research output: Contribution to conferencePaperResearchpeer-review

Detecting Transition in Flat Plate Flow with Laser Interferometric Vibrometry (LIV)

Bader, P., Sanz, W., Peterleithner, J., Woisetschläger, J., Heitmeir, F., Meile, W. & Brenn, G., Jun 2016, Proceedings of ASME Turbo Expo 2016: Turbine Technical Conference and Exposition GT2016. GT2016-56043

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Flat-plate boundary layers in accelerated flow

Bader, P., Pschernig, M., Sanz, W., Woisetschläger, J., Heitmeir, F., Meile, W. & Brenn, G., Jun 2016, Proceedings of ASME Turbo Expo 2016: Turbine Technical Conference and Exposition GT2016. GT2016-56044

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Introduction of a Project-Based-Course in Turbine Stage Design for Undergraduate Students at Graz University of Technology

Marn, A., Schönleitner, F., Peterleithner, J., Woisetschläger, J. & Heitmeir, F., 2016, Proceedings of the ASME Turbo Expo. p. GT2016-56071

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical and Experimental Results of a Turning Mid Turbine Frame with Embedded Design in terms of Acoustic Mode Analysis

Zerobin, S., Bader, P., Faustmann, C., Marn, A., Heitmeir, F. & Göttlich, E., 2016, 22nd AIAA/CEAS Aeroacoustics Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2015

Acoustic Comparison of Different Turbine Exit Guide Vane Designs- Part 1: Design Philosophy and Numerical Predictions

Broszat, D., Marn, A., Hoeger, M., Selic, T., Schönleitner, F. & Heitmeir, F., 2015, 21st AIAA/CEAS Aeroacosutic Conference. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Acoustic Comparison of Different Turbine Exit Guide Vane Designs- Part2: Experimental Analysis

Marn, A., Selic, T., Schönleitner, F., Zerobin, S., Broszat, D., Hoeger, M. & Heitmeir, F., 2015, 21st AIAA/CEAS Aeroacoustics Conference 2015. ., p. 1-11

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of an Acoustically Optimized and an Aerodynamically Optimized Exit Guide Vane

Selic, T., Marn, A., Schönleitner, F., Broszat, D., Hoeger, M. & Heitmeir, F., 23 Mar 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of an Acoustically Optimized and an Aerodynamically Optimized Exit Guide Vane

Selic, T., Marn, A., Schönleitner, F., Broszat, D., Hoeger, M. & Heitmeir, F., 2015, 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison of the Aerodynamics of Acoustically Designed EGVs and a State-of-the-Art EGV

Marn, A., Broszat, D., Selic, T., Schönleitner, F. & Heitmeir, F., 2015, In : Journal of Turbomachinery. 137, p. 041002-1-041002-10

Research output: Contribution to journalArticleResearchpeer-review

Cracks on the Roots of Turbine Blades of the Low-Pressure Turbine in a Steam Power Plant

Plesiutschnig, E., Vallant, R., Stöfan, G., Sommitsch, C., Mayr, M., Marn, A. & Heitmeir, F., 2015, In : Practical metallography = Praktische Metallographie. 52, 4, p. 214-225

Research output: Contribution to journalArticleResearchpeer-review

Detection of blade mistuning in a low pressure turbine rotor resulting from manufacturing tolerances and differences in blade mounting

Schönleitner, F., Traußnig, L. M., Marn, A. & Heitmeir, F., 2015, SIRM. ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Detection of blade mistuning in a low pressure turbine rotor resulting from manufacturing tolerances and differences in blade mounting

Schönleitner, F., Traußnig, L. M., Marn, A. & Heitmeir, F., 23 Feb 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Experimental Blade Vibration Measurements on Rotating Turbomachinery Blades

Schönleitner, F., Selic, T., Traußnig, L. M., Heitmeir, F. & Marn, A., 8 Sep 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modal characterization, strain gauge setup and 1-way FSI of a low pressure turbine rotor blading

Schönleitner, F., Traußnig, L. M., Heitmeir, F. & Marn, A., 15 Jun 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modal characterization, strain gauge setup and 1-way FSI of a low pressure turbine rotor blading

Schönleitner, F., Traußnig, L. M., Heitmeir, F. & Marn, A., 2015, ASME Turbo Expo. ., p. 1-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On the Acoustics of a Turning Mid Turbine Frame with Embedded Design in a Two-Stage Test-Turbine

Faustmann, C., Zerobin, S., Spataro, R., Marn, A., Heitmeir, F. & Göttlich, E., 2015, In : Proceedings of the Institution of Mechanical Engineers / A. p. 1-10

Research output: Contribution to journalArticleResearchpeer-review

On the Acoustics of a Turning Mid Turning Frame with Embedded Design in a Two-Stage Test-Turbine

Faustmann, C., Zerobin, S., Spataro, R., Marn, A., Heitmeir, F. & Göttlich, E., 2015, (Accepted/In press) European Conference on Turbomachinery Fluid Dynamics and Thermodynamics. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

On Turbulence Measurements and Analyses in a Two-Stage Two-Spool Turbine Rig

Bauinger, S., Behre, S., Lengani, D., Gündogdu, Y., Heitmeir, F. & Göttlich, E., 2015, ASME Turbo Expo 2015. ., p. 42698-1-42698-13

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Turbine Noise Reduction: Axial Spacing and Embedded Design

Faustmann, C., Zerobin, S., Bauinger, S., Marn, A., Heitmeir, F. & Göttlich, E., 2015, Proceedings of ASME Turbo Expo. ., p. 43565-1-43565-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2014

Comparison of the Aerodynamics of Acoustically Designed EGVs and a State-of-the-Art EGV

Marn, A., Broszat, D., Selic, T., Schönleitner, F. & Heitmeir, F., 16 Jun 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of the Aerodynamics of Acoustically Designed EGVs and a State-of-the-Art EGV

Marn, A., Broszat, D., Selic, T., Schönleitner, F. & Heitmeir, F., 2014, ASME Turbo Expo. ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of a Turning Mid Turbine Frame With Embedded Design - Part I: Design and Steady Measurements

Spataro, R., Göttlich, E., Lengani, D., Faustmann, C. & Heitmeir, F., 2014, In : Journal of Turbomachinery. 136, 7, p. 071008-1-071008-9

Research output: Contribution to journalArticleResearchpeer-review

Development of a Turning Mid Turbine Frame With Embedded Design - Part II: Unsteady Measurements

Spataro, R., Göttlich, E., Lengani, D., Faustmann, C. & Heitmeir, F., 2014, In : Journal of Turbomachinery. 136, 7, p. 071012-1-071012-8

Research output: Contribution to journalArticleResearchpeer-review

Experimental investigation of a vortex-generator-controlled intermediate turbine duct under the influence of rotating wakes

Steiner, M., Göttlich, E., Spataro, R. & Heitmeir, F., 2014, 32nd AIAA Applied Aerodynamics Conference. ., p. 1-12

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Investigation on Noise Generation and Propagation for Different Vane-Vane Positions in a Two-Stage Two-Spool Test Turbine

Bauinger, S., Faustmann, C. & Heitmeir, F., 2014.

Research output: Contribution to conferencePosterResearchpeer-review

Measurement and Decomposition of Periodic Flow Structures of a Test Turbine

Lengani, D., Kindermann, S., Selic, T., Marn, A. & Heitmeir, F., 2014, In : Experiments in fluids. p. 1-15

Research output: Contribution to journalArticleResearchpeer-review

Numerical investigation regarding contact modeling for evaluating the modal characteristics of a low pressure turbine rotor

Justl, M., Traußnig, L. M., Schönleitner, F., Marn, A. & Heitmeir, F., 2014.

Research output: Contribution to conferencePosterResearch