Photo of Franz Haas

Franz Haas

Univ.-Prof. Dipl.-Ing. Dr.techn.

1991 …2022
If you made any changes in Pure these will be visible here soon.

Research Output 1991 2019

2019

3D-Druck von Natriumacetat-Trihydrat: produktiv, einfach, ressourcenschonend

Brillinger, M., Fuchs, C., Haas, F. & Pichlkastner, C., 12 Sep 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Adaptive Assembly Approach for E-Axles

Abdul Hadi, M., Brillinger, M. & Haas, F. (ed.), 10 Oct 2019, (Accepted/In press). 12 p.

Research output: Contribution to conferencePaperResearchpeer-review

Axles
Flexible manufacturing systems
Costs

Adaptive Assembly Concepts for Low Volume Production Based on Two Case Studies

Abdul Hadi, M., 15 Oct 2019, 133 p.

Research output: ThesisMaster's ThesisResearch

Automation
Costs

Adaptive Smart Assembly Concept in e-Mobility - A Research Direction

Brillinger, M., Abdul Hadi, M., Haas, F. & Weinzerl, M., 16 May 2019. 14 p.

Research output: Contribution to conferencePaperResearch

Adaptive Smart Production: Cognitive aspects in low volume high flexibility e-powertrain production

Brillinger, M., Haas, F., Hick, H. & Weinzerl, M., 26 Feb 2019.

Research output: Contribution to conferencePosterResearch

Direct Machining of selective laser melted components with optimized support structures

Höller, C., Hinterbuchner, T., Schwemberger, P., Zopf, P., Pichler, R. & Haas, F., 24 Jun 2019, Procedia CIRP. Vol. 81. p. 375-380 6 p. (Procedia CIRP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access

LEISTBARE E-MOBILITÄT: Kostensenkung durch neue Ansätze in der Produktion

Brillinger, M., Abdul Hadi, M., Kassem, A., Haas, F. & Weinzerl, M., 18 Jun 2019.

Research output: Contribution to conferencePosterResearchpeer-review

LOW-COST E-MOBILITY: Cost Reduction Through New Approaches in Production

Brillinger, M., Abdul Hadi, M., Haas, F. & Weinzerl, M., 16 May 2019.

Research output: Contribution to conferencePosterResearch

Neue Augmented-Reality-Lösung reduziert Stillstandszeit im Störfall

Viehberger, J., Vorraber, W., Eisele, P. S. & Haas, F., Jun 2019, In : VDI-Z integrierte Produktion. 2019, 6, p. 20-22 3 p.

Research output: Contribution to journalArticleResearch

Optimierung der Kühlschmierstoff-Zuführung an eine CBN-Schleifscheibe mittels 3D-Druck

Zopf, P., Höller, C., Potocnik, C., Schwemberger, P., Spenger, T., Steffan, M. & Haas, F., 13 Feb 2019.

Research output: Contribution to conferencePosterResearchpeer-review

Platform for Monitoring and Comparing Machining Processes in Terms of Energy Efficiency

Haas, F., Suarez Gonzalez, A., Cus, F. & Zuperl, U., 22 Jul 2019, In : Transactions of FAMENA. 43, 2, p. 31 - 47 17 p.

Research output: Contribution to journalArticleResearchpeer-review

energy efficiency
Energy efficiency
Machining
Energy utilization
Monitoring

RPM-SYNCHRONOUS GRINDING - Investigation and comparison of surface topography of Synchro-Finish manufactured workpieces

Spenger, T., Haas, F., Cihak-Bayr, U., Eder, S. J., Weiss, M., Weinzerl, M. & Schneider, M., 2019, Procedia CIRP: 52nd CIRP Conference on Manufacturing Systems (CMS). Butala, P., Govekar, E. & Vrabič, R. (eds.). Elsevier B.V., Vol. 81. p. 476-481 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
2018

3D-DRUCK VON NATRIUMACETAT-TRIHYDRAT: Verfahren und Vorrichtung zur Herstellung eines dreidimensionalen Objekts

Brillinger, M., Haas, F., Trummer, A., Peters, S., Pichlkastner, C., Fuchs, C., Liebl, R., Achatz, A. & Egger, P., 22 Nov 2018, Patent No. WO 2018/210437 A1, Priority date 16 May 2017, Priority No. 17171234.2

Research output: PatentResearch

3D-Druck von Natriumacetat-Trihydrat als Ergebnis eines konsequenten Entwicklungsprozesses

Brillinger, M., 31 Jul 2018, 134 p.

Research output: ThesisDoctoral ThesisResearch

File

Drehzahlsynchron-Schleifprozess: Auftretende Prozesskräfte beim Schruppschleifen

Spenger, T., Steffan, M. & Haas, F., 23 Jan 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Drehzahlsynchron-Schleifprozess: Erreichbare Oberflächenqualitäten beim Schlichtschleifen

Steffan, M., Haas, F. & Spenger, T., 15 May 2018, p. 1. 1 p.

Research output: Contribution to conferencePosterResearchpeer-review

E-Achse 2030: „Design for Manufacturing“ im Kontext von I4.0

Brillinger, M. & Haas, F., 21 Jun 2018.

Research output: Contribution to conferencePosterResearch

Machine-Tool for Research in Synchronous Grinding

Steffan, M., 15 Jan 2018, 151 p.

Research output: ThesisDoctoral ThesisResearch

2017

Adaptive Grinding Process (AGriPro) – Prevention of Thermal Damage using OPC UA Technique and in-Situ Metrology

Steffan, M., Haas, F., Pierer, A. & Gentzen, J., 30 Aug 2017, In : Journal of Manufacturing Science and Engineering. 139, 12

Research output: Contribution to journalArticleResearchpeer-review

ANALYSIS OF THE CUTTING FORCE WITH ULTRASONIC ASSISTED MANUFACTURING OF STEEL (S235JR)

Zopf, P. & Haas, F., 6 Nov 2017. 8 p.

Research output: Contribution to conferencePaperResearchpeer-review

Einsatz von OPC UA zur Optimierung der Prozessregelung in der Schleifbearbeitung

Steffan, M. & Haas, F., 1 Feb 2017.

Research output: Contribution to conferencePosterResearch

File

Energy Consumption Factor as a new Classification Figure to compare Production Processes

Haas, F., 2017, Jahrbuch Instandhaltungstage 2017. Isopp, J. & Dankl, A. (eds.). p. 139-142 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Optimierung der Schleifbearbeitung mittels OPC UA: Neue Prozessregelung zur Vermeidung von thermischer Randzonenschädigung

Steffan, M., Haas, F., Zopf, P. & Edler, J., 1 Mar 2017, In : Zeitschrift für wirtschaftlichen Fabrikbetrieb. 112, 3/2017, p. 137 140 p.

Research output: Contribution to journalArticleResearchpeer-review

RPM-SYNCHRONOUS GRINDING – CONTROL CONCEPTS TO IMPROVE SURFACE QUALITIES FOR A HIGHLY EFFICIENT NON-CIRCULAR GRINDING APPROACH

Steffan, M., Haas, F. & Spenger, T., 10 Sep 2017, (Accepted/In press).

Research output: Contribution to conferencePaperResearchpeer-review

Ultraschallunterstütztes Bearbeiten von Hartmetall-Bauteilen (HB30F)

Zopf, P. & Haas, F., 1 Feb 2017.

Research output: Contribution to conferencePosterResearch

File
2016

Basic Characterisation of 17-4PH structure manufactured by Selective Laser Melting

Brillinger, M., Haas, F., Enzinger, N. & Pfanner, S., 25 Nov 2016, Industrial perspectives in Additive Technologies. p. 157-162 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Entwicklungsmethodik mit Berücksichtigung der Fertigungsaspekte für die Entwicklung von Baugruppen und Bauteilen in der Beschlägeindustrie.

Haas, F., Gerstgrasser, M., Netzer, E. & Küng, D., May 2016, In : Konstruktion. 05-2016, p. 84 - 87

Research output: Contribution to journalArticleResearch

Progress in Titanium Machining

Haas, F., Zopf, P. & Edler, J., 2 Jun 2016. 6 p.

Research output: Contribution to conferencePaperResearchpeer-review

Open Access
File
Machining
Titanium
Titanium alloys
Force measurement
Milling (machining)
2015

Basic Characterisation of 17-4PH structure manufactured by Selective Laser Melting

Brillinger, M., Enzinger, N., Haas, F. & Pfanner, S., 2015.

Research output: Contribution to conferencePosterResearch

Open Access
File

Flexible Fertigungssysteme und 3D-Druck

Haas, F., 2015, In : WING-Business. 2/15, p. 28-30

Research output: Contribution to journalArticleResearch

Open Access
File
2014

Energy optimized machine tools and processes with advanced measuring technology and evaluation

Redecker, M. E., Haas, F. & Schmiedhofer, B., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Energy optimized machine tools and processes with advanced measuring technology and evaluation

Redecker, M. E., Haas, F. & Schmiedhofer, B., 2014, Trends in the Development of Machinery and Associated Technology. Fojnica: Stamparija Fojnica, Vol. 18. p. 433-436 (Trends in the Development of Machinery and Associated Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2013

New Force and Torque Measurement Adapter for Robot Applications

Haas, F., Bratl, M. & Sommer, R., 6 Jun 2013.

Research output: Contribution to conferencePaperResearch

2012

Innovativer Drehmomentsensor als Schlüsselkomponente zur „Intelligenten Produktion“

Haas, F. & Brandl, M., 2012.

Research output: Contribution to conferencePosterResearch

2011

Didaktik mit 3D-Modellen

Haas, F., 2011, In : RapidX. 1, p. 24-27

Research output: Contribution to journalArticleResearch

Präzises, schnelles Messgerät für mobiles Condition Monitoring von Zerspanungsprozessen

Haas, F. & Nuspl, E., 24 Feb 2011.

Research output: Contribution to conferencePaperResearch

2010

Neues Messinstrument zur Analyse und Überwachung von Zerspanungsprozessen

Haas, F. & Blaha, J., 2010.

Research output: Contribution to conferencePosterResearch

2009

Contactless Torque Sensor - Mechatronic Principle and Prototype Development

Haas, F. & Brandl, M., 2 Jul 2009, p. 55-61.

Research output: Contribution to conferencePaperResearchpeer-review

2008

Computational Fluid Dynamics (CFD) for the Optimization of Products and Processes

Haas, F. & Pauritsch, M., 1 May 2008.

Research output: Contribution to conferencePaperResearch

2003

Hydrauliksimulation einer Zerkleinerungsanlage

Haas, F. & Grabmeier, A., 13 Nov 2003.

Research output: Contribution to conferencePaperResearch

1998

Messvorrichtung zur Kontrolle der geometrischen und dynamischen Genauigkeit von NC-Werkzeugmaschinen und Industrierobotern

Haas, F., 5 Aug 1998, IPC No. EP 0 729 005 B1, Priority date 23 Feb 1995

Research output: PatentResearch

1995

Related test methods for robot performance identification

Kovac, I., Haas, F. & Frank, A., 1995, ISMCR '95 : proceedings of the Fourth international symposium. Bratislava: Slovak Technical University, p. 255-260 (Slovak Technical University: Slovak Academy of Sciences and Slovak Metrological Society).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1994

Wie genau arbeitet Ihre CNC-Maschine? - Die Dynamik im Brennpunkt

Haas, F., 1994, In : Technikreport. 9a/94, p. 27-31

Research output: Contribution to journalArticleResearch

1993

Circular Test: A new method for testing industrial robots

Haas, F. & Frank, A., 13 Jun 1993.

Research output: Contribution to conferencePaperResearch

Dynamische Roboterprüfung - Der Kreisformtest nun auch für Industrieroboter

Haas, F., 1993, In : Technikreport. 9a/93, p. 17-19

Research output: Contribution to journalArticleResearch

1991

Automatisierung einer CVS-Anlage für Nutzfahrzeuge

Haas, F., 1991

Research output: ThesisDiploma ThesisResearch