Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

Filter
(Old data) Lecture or Presentation
2012

Simulation der Produktion von Nahtlosrohren entlang der Prozesskette

Timoshenkov, A., Sommitsch, C. & Klarner, J., 4 May 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Zelluläre Automaten als Werkzeug zur Abbildung komplexer Systeme – Rekristallisation

Timoshenkov, A., Sommitsch, C. & Klarner, J., 12 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

„Russian Way“ and Metallurgy

Timoshenkov, A., Sommitsch, C. & Klarner, J., 6 Dec 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

ADVANCED CREEP RESISTANT MARTENSITIC STEELS

Sommitsch, C., Mayr, P., Schlacher, C., Kobayashi, M. & Toda, H., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Analysis of material flow and stresses in a rolling mill for seamless tubes

Timoshenkov, A., Sommitsch, C. & Klarner, J., 30 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 6 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ein Verformungsmodell für das Rohrwalzen in hintereinanderliegenden Dreiwalzenkalibern

Timoshenkov, A., Sommitsch, C. & Klarner, J., 21 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Sommitsch, C. & Warchomicka, F., 18 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Experience with creep tested 9Cr3W3CoVNbBN welded joints

Mayr, P., Schlacher, C., Mitsche, S. & Sommitsch, C., 11 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction Stir Welding of dissimilar material combinations

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 6 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction stir welding of magnesium and steel in car body engineering

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 12 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Impact of Mg, Cu and Si distribution on the microhardness of Al dendrites after casting, homogenization and continuous cooling of G-AlSi7MgCu0.5

Krumphals, F., Mittermayr, F., Gumpl Philipp, N. V., Stauder, B., Sommitsch, C. & Radis, R., 4 Oct 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of temperature and strain rate on the softening processes in Allvac 718Plus

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Innovative Fügetechniken am Beispiel des Rührreibschweißens

Sommitsch, C. & Enzinger, N., 6 Oct 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Loss of ductility caused by AlN precipitates in Hadfield steel

Radis, R., Schlacher, C., Mayr, P., Enzinger, N., Kozeschnik, E. & Sommitsch, C., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Mikrostrukturmodellierung in Ti-6Al-4V während der thermo-mechanischen Behandlung

Krumphals, A. & Sommitsch, C., 4 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Sommitsch, C. & Stockinger, M., 17 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung von Ausscheidungs – Abständen in komplexen Systemen

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 13 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 1 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Particle distance distributions and their effect on precipitate strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 2 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Particle Distance Distributions and Their Effect on Precipitate Strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 17 Jan 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten

Krumphals, A., Sommitsch, C. & Stockinger, M., 26 Feb 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Study of the transformation kinetics during hot rolling

Timoshenkov, A., Sommitsch, C. & Klarner, J., 6 Dec 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 30 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Werkstoffmodellierung und Prozesssimulation in der Schweißtechnik

Sommitsch, C. & Enzinger, N., 5 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2010

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 25 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of cellular automata and phase field methods for mdelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 31 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Grain growth during annealing: experiments vs. modelling

Sommitsch, C., Candic, M. & Tian, B., 4 Jul 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Lifetime prediction of tools made of hot work steels

Krumphals, F. & Sommitsch, C., 26 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Microstructure modelling of Ti-6Al-4V during thermomechanical treatment

Krumphals, A. & Sommitsch, C., 8 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung von Ausscheidungs-Abstandsverteilungen und Anwendung für die Ausscheidungsverfestigung

Sonderegger, B., Sommitsch, C., Holzer, I. & Kozeschnik, E., 4 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of recrystallization nucleation at hard inclusions

Mitter, W. & Sommitsch, C., 4 Jul 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of structure evolution and mechanical properties during thermo-mechanic processing of the α−β titanium alloy Ti-6Al-4V

Krumphals, A. & Sommitsch, C., 25 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Analysis of the influence of rolling conditions on the microstructure evolution during hot rolling of aluminium alloy 5083 using a physical model

Sherstnev, P., Melzer, C. & Sommitsch, C., 5 Sep 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Simulation of the Simultaneous Precipitation of Delta and Gamma Prime Phases in the Ni-Base Superalloy ATI Allvac 718 Plus

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 9 Oct 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Online-Simulation der Produktion von Nahtlosrohren entlang der Prozesskette mit einer CPE - Stoßbankanlage

Timoshenkov, A., Sommitsch, C. & Sonderegger, B., 16 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Process Simulation of Aluminium Sheet Metal Deep Drawing at Elevated Temperatures

Trattnig, G., Lind, C., Sommitsch, C., Feuerhuber, H. & Winklhofer, J., 13 Jun 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Simulation Based Process Optimization of Aluminium Sheet Metal Deep Drawing at Elevated Temperatures

Winklhofer, J., Trattnig, G., Lind, C., Sommitsch, C. & Feuerhuber, H., 31 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2009

Abschlusspräsentation Modul 5: Schrägwalzen

Pschera, R., Klarner, J. & Sommitsch, C., 17 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A method for measuring the electrical contact resistance during welding

Galler, M., Ernst, W. & Sommitsch, C., 2 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Ansätze für die Bewertung der Formänderungsverhältnisse beim Schrägwalzen

Pschera, R., Klarner, J. & Sommitsch, C., 28 Feb 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fast automated 3D EDXS Mapping

Wagner, J., Mitsche, S., Letofsky-Papst, I., Schröttner, H. & Sommitsch, C., 30 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Gefügecharakterisierung der Superlegierung Allvac 718 PlusTM mittels elektronenmikroskopischer Methoden

Mitsche, S., Huber, D., Wagner, J., Letofsky-Papst, I., Sommitsch, C. & Stockinger, M., 15 Apr 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Interaction of the Precipitation Kinetics of Delta and Gamma Prime Phases in Nickel-Base Superalloy ATI Allvac 718 Plus

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 24 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Metadynamic recrystallization of the nickel-based superalloy Allvac 718PlusTM

Sommitsch, C., Huber, D. & Stockinger, M., 25 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Microstructure characterization and simulations of 12%Cr martensitic steel for fossil power plants

Mendez Martin, F., Albu, M., Sonderegger, B. & Sommitsch, C., 2 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der duktilen Schädigung in der Warmumformung und Parameteridentifikation mittels inverser Analyse

Pschera, R. & Sommitsch, C., 2 Oct 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der Strukturentwicklung während des Warmwalzens

Sommitsch, C. & Sherstnev, P., 25 Mar 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of ductile damage during cross-rolling of seamless pipes

Pschera, R., Klarner, J. & Sommitsch, C., 18 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch