Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

Filter
(Old data) Lecture or Presentation
(Old data) Lecture or Presentation

Abschlusspräsentation Modul 5: Schrägwalzen

Pschera, R., Klarner, J. & Sommitsch, C., 17 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

ADVANCED CREEP RESISTANT MARTENSITIC STEELS

Sommitsch, C., Mayr, P., Schlacher, C., Kobayashi, M. & Toda, H., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Advanced microstructures for increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Mitsche, S., Paul, S. & Zeiler, G., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A fracture mechanics investigation on crack growth in massive forming

Trattnig, G., Sommitsch, C. & Pippan, R., 23 Jun 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse

Timoshenkov, A., Sommitsch, C. & Klarner, J., 24 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Al-Mg-Sc Stringer: Von der Grundlagenuntersuchung zum Prototypen

Tändl, J., Anders, K., Janisch, S. D., Kerstan, H., Palm, F., Entelmann, W., Gradinger, R., Poletti, M. C. & Sommitsch, C., 9 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A method for measuring the electrical contact resistance during welding

Galler, M., Ernst, W. & Sommitsch, C., 2 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Analysis of material flow and stresses in a rolling mill for seamless tubes

Timoshenkov, A., Sommitsch, C. & Klarner, J., 30 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 28 Aug 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ansätze für die Bewertung der Formänderungsverhältnisse beim Schrägwalzen

Pschera, R., Klarner, J. & Sommitsch, C., 28 Feb 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A Precipitation Model for Multi-Component Multi-Phase Systems in Nickel-Base Superalloys

Sommitsch, C., Kozeschnik, E., Wasle, G. & Buchmayr, B., 4 Dec 2000.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Automated measurement of near-surface plastic shear strain

Trummer, G., Six, K., Marte, C., Meierhofer, A. & Sommitsch, C., 8 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 12 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Beurteilung der effektiven Dehnung bei der mehrstufigen Verformung von komplexen Legierungen

Candic, M., Tian, B. & Sommitsch, C., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Bruchmechanische Untersuchung des Risswachstums für die Massivumformung

Trattnig, G., Sommitsch, C. & Pippan, R., 17 Feb 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Charakterisierung der Ni-Basis-Superlegierung Alloy 718 Plus

Stotter, C., Sommitsch, C. & Buchmayr, B., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 25 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of cellular automata and phase field methods for mdelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 31 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of fracture criteria at high temperatures for nickel-based alloys

Rüf, G., Sommitsch, C. & Buchmayr, B., 25 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Co-ordination of European Research in Structural Materials for Power Generation Equipment

Sommitsch, C., Vanstone, R., Kern, T-U., Bernard, P., Mayr, P., Thomson, R. & Agüero, A., 14 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Crack Growth in Massive Forming: A Fracture Mechanics Approach

Trattnig, G., Sommitsch, C. & Pippan, R., 11 Aug 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Uesugi, K., Suzuki, Y. & Sommitsch, C., 4 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep damage investigation of advanced martensitic 9Cr steel weldments for high temperature applications

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 7 Jul 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep-fatigue of multi-part container during hot extrusion of copper – Simulation and experimental comparison

Krumphals, F., Wlanis, T., Sommitsch, C. & Redl, C., 14 Jan 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep properties and evolution of damage in advanced creep resistant martensitic steels

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Current developments of tooling technology in the area of hot stamping

Boskovic, V. & Sommitsch, C., 22 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Damage analysis of a cracked low-pressure steam turbine blade

Plesiutschnig, E., Vallant, R., Enzinger, N. & Sommitsch, C., 28 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Damage simulation of extrusion dies of different geometry and material

Wlanis, T., Sommitsch, C., Hatzenbichler, T. & Wieser, V., 25 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 6 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Determination of isothermal flow curves and the dynamic recrystallization kinetic of the nickel-basis superalloy Allvac 718 PlusTM by means of rastegaev specimens

Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 10 Sep 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 12 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 4 Feb 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ductile fracture analysis with damage models of effective stresses at high temperatures

Sommitsch, C. & Rüf, G., 9 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Duktile Schädigung und Mikrostrukturentwicklung einer Nickelbasislegierung während der Warmumformung – Experiment und Modellierung

Rüf, G., Sommitsch, C. & Buchmayr, B., 27 Jun 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

Sommitsch, C., Pölt, P., Mitsche, S. & Walter, M., 13 Jul 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EBSD-Untersuchungen des Rekristallisationsverhaltens der Nickelbasislegierung Alloy 80A während der Warmverformung

Mitsche, S., Sommitsch, C. & Pölt, P., 27 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ein Verformungsmodell für das Rohrwalzen in hintereinanderliegenden Dreiwalzenkalibern

Timoshenkov, A., Sommitsch, C. & Klarner, J., 21 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron Beam Processing for the Production of Model Alloys

Spenger, T., Enzinger, N., Hofer, F., Simic, S., Sommitsch, C. & Wiednig, C. A., 21 Sep 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron Beam Welding of thick walled Copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 3 Nov 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Elektronenstrahlschweißen - Schlüsseltechnologie für High-End Anwendungen

Tändl, J., Beal, C., Enzinger, N. & Sommitsch, C., 11 Oct 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Entwicklung eines Warmstauchversuchs als Grundlage für die Beschreibung des Schädigungsverhaltens einer Nickel-Basis-Superlegierung

Rüf, G., Sommitsch, C. & Buchmayr, B., 27 Feb 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Sommitsch, C. & Warchomicka, F., 18 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of creep damage in MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 29 Jun 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Experience with creep tested 9Cr3W3CoVNbBN welded joints

Mayr, P., Schlacher, C., Mitsche, S. & Sommitsch, C., 11 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fast automated 3D EDXS Mapping

Wagner, J., Mitsche, S., Letofsky-Papst, I., Schröttner, H. & Sommitsch, C., 30 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FEM - gekoppelte Simulation der Mikrostruktur bei Umformprozessen

Wasle, G., Buchmayr, B., Lind, C. & Sommitsch, C., 22 Feb 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Enzinger, N. & Sommitsch, C., 20 Feb 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Mitsche, S., Enzinger, N. & Sommitsch, C., 8 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ferritische Phasenumwandlung zur Verbesserung der Kriecheigenschaften von martensitischen 9 - 13 % Cr Stählen

Plesiutschnig, E. & Sommitsch, C., 27 Nov 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Finite-Elemente-Modellierung des Schrägwalzens

Pschera, R. & Sommitsch, C., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch