Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

Filter
(Old data) Lecture or Presentation

Abschlusspräsentation Modul 5: Schrägwalzen

Pschera, R., Klarner, J. & Sommitsch, C., 17 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

ADVANCED CREEP RESISTANT MARTENSITIC STEELS

Sommitsch, C., Mayr, P., Schlacher, C., Kobayashi, M. & Toda, H., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Advanced microstructures for increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Mitsche, S., Paul, S. & Zeiler, G., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A fracture mechanics investigation on crack growth in massive forming

Trattnig, G., Sommitsch, C. & Pippan, R., 23 Jun 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse

Timoshenkov, A., Sommitsch, C. & Klarner, J., 24 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Al-Mg-Sc Stringer: Von der Grundlagenuntersuchung zum Prototypen

Tändl, J., Anders, K., Janisch, S. D., Kerstan, H., Palm, F., Entelmann, W., Gradinger, R., Poletti, M. C. & Sommitsch, C., 9 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A method for measuring the electrical contact resistance during welding

Galler, M., Ernst, W. & Sommitsch, C., 2 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Analysis of material flow and stresses in a rolling mill for seamless tubes

Timoshenkov, A., Sommitsch, C. & Klarner, J., 30 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 28 Aug 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ansätze für die Bewertung der Formänderungsverhältnisse beim Schrägwalzen

Pschera, R., Klarner, J. & Sommitsch, C., 28 Feb 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A Precipitation Model for Multi-Component Multi-Phase Systems in Nickel-Base Superalloys

Sommitsch, C., Kozeschnik, E., Wasle, G. & Buchmayr, B., 4 Dec 2000.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Automated measurement of near-surface plastic shear strain

Trummer, G., Six, K., Marte, C., Meierhofer, A. & Sommitsch, C., 8 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Beschreibung der Subkornmissorientierung in der Nähe von harten Teilchen von plastisch verformten Metallen

Loidolt, P., Ulz, M. H., Mitter, W. & Sommitsch, C., 12 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Beurteilung der effektiven Dehnung bei der mehrstufigen Verformung von komplexen Legierungen

Candic, M., Tian, B. & Sommitsch, C., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Bruchmechanische Untersuchung des Risswachstums für die Massivumformung

Trattnig, G., Sommitsch, C. & Pippan, R., 17 Feb 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Charakterisierung der Ni-Basis-Superlegierung Alloy 718 Plus

Stotter, C., Sommitsch, C. & Buchmayr, B., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 25 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of cellular automata and phase field methods for mdelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 31 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of fracture criteria at high temperatures for nickel-based alloys

Rüf, G., Sommitsch, C. & Buchmayr, B., 25 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Co-ordination of European Research in Structural Materials for Power Generation Equipment

Sommitsch, C., Vanstone, R., Kern, T-U., Bernard, P., Mayr, P., Thomson, R. & Agüero, A., 14 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Crack Growth in Massive Forming: A Fracture Mechanics Approach

Trattnig, G., Sommitsch, C. & Pippan, R., 11 Aug 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Uesugi, K., Suzuki, Y. & Sommitsch, C., 4 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep damage investigation of advanced martensitic 9Cr steel weldments for high temperature applications

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 7 Jul 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep-fatigue of multi-part container during hot extrusion of copper – Simulation and experimental comparison

Krumphals, F., Wlanis, T., Sommitsch, C. & Redl, C., 14 Jan 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Creep properties and evolution of damage in advanced creep resistant martensitic steels

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Current developments of tooling technology in the area of hot stamping

Boskovic, V. & Sommitsch, C., 22 Sep 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Damage analysis of a cracked low-pressure steam turbine blade

Plesiutschnig, E., Vallant, R., Enzinger, N. & Sommitsch, C., 28 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Damage simulation of extrusion dies of different geometry and material

Wlanis, T., Sommitsch, C., Hatzenbichler, T. & Wieser, V., 25 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 6 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Determination of isothermal flow curves and the dynamic recrystallization kinetic of the nickel-basis superalloy Allvac 718 PlusTM by means of rastegaev specimens

Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 10 Sep 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 4 Feb 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 12 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ductile fracture analysis with damage models of effective stresses at high temperatures

Sommitsch, C. & Rüf, G., 9 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Duktile Schädigung und Mikrostrukturentwicklung einer Nickelbasislegierung während der Warmumformung – Experiment und Modellierung

Rüf, G., Sommitsch, C. & Buchmayr, B., 27 Jun 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

Sommitsch, C., Pölt, P., Mitsche, S. & Walter, M., 13 Jul 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EBSD-Untersuchungen des Rekristallisationsverhaltens der Nickelbasislegierung Alloy 80A während der Warmverformung

Mitsche, S., Sommitsch, C. & Pölt, P., 27 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ein Verformungsmodell für das Rohrwalzen in hintereinanderliegenden Dreiwalzenkalibern

Timoshenkov, A., Sommitsch, C. & Klarner, J., 21 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron Beam Processing for the Production of Model Alloys

Spenger, T., Enzinger, N., Hofer, F., Simic, S., Sommitsch, C. & Wiednig, C. A., 21 Sep 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron Beam Welding of thick walled Copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 3 Nov 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Elektronenstrahlschweißen - Schlüsseltechnologie für High-End Anwendungen

Tändl, J., Beal, C., Enzinger, N. & Sommitsch, C., 11 Oct 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Entwicklung eines Warmstauchversuchs als Grundlage für die Beschreibung des Schädigungsverhaltens einer Nickel-Basis-Superlegierung

Rüf, G., Sommitsch, C. & Buchmayr, B., 27 Feb 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Sommitsch, C. & Warchomicka, F., 18 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of creep damage in MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 29 Jun 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Experience with creep tested 9Cr3W3CoVNbBN welded joints

Mayr, P., Schlacher, C., Mitsche, S. & Sommitsch, C., 11 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Fast automated 3D EDXS Mapping

Wagner, J., Mitsche, S., Letofsky-Papst, I., Schröttner, H. & Sommitsch, C., 30 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FEM - gekoppelte Simulation der Mikrostruktur bei Umformprozessen

Wasle, G., Buchmayr, B., Lind, C. & Sommitsch, C., 22 Feb 2002.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Enzinger, N. & Sommitsch, C., 20 Feb 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Mitsche, S., Enzinger, N. & Sommitsch, C., 8 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ferritische Phasenumwandlung zur Verbesserung der Kriecheigenschaften von martensitischen 9 - 13 % Cr Stählen

Plesiutschnig, E. & Sommitsch, C., 27 Nov 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Finite-Elemente-Modellierung des Schrägwalzens

Pschera, R. & Sommitsch, C., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch