Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2012

Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse

Timoshenkov, A., Sommitsch, C. & Klarner, J., 2012, (Accepted/In press) Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse. Tscheljabinsk: .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of creep cavitation in advanced 9-12%Cr steels using 3-D characterization

Gupta, C., Toda, H., Hoshino, H., Yamauchi, S., Kobayashi, M., Schlacher, C., Sommitsch, C., Mayr, P., Adachi, A., Usegi, K., Suzuki, Y. & Takeuchi, A., 2012, 12th International Conference on Creep and Fracture of Engineering Materials and Structures. ., p. C17-C18

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of low-stress creep testing data and its implication on the life-time prediction for 9-12% Cr steels

Mayr, P., Schlacher, C., Mendez Martin, F., Radis, R. & Sommitsch, C., 2012, 12th International Conference on Creep and Fracture of Engineering Materials and Structures. ., Vol. 12. p. C24-C25 (Creep and Fracture of Engineering Materials and Structures).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 2012, Proceedings 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 344-351

Research output: Chapter in Book/Report/Conference proceedingConference contribution

CORROSION AND MECHANICAL PROPERTIES OF WELDED ALUMINIUM AND MAGNESIUM ALLOYS FOR REFRIGERATION COMPRESSORS IN COMPARISON WITH DEEP-DRAWING STEEL

Kerschbaumer, K. G., Vallant, R., Enzinger, N. & Sommitsch, C., 2012, 20th JUBILEE CONFERENCE ON MATERIALS AND TECHNOLOGY. ., p. 129-129

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Das österreichische Kompetenznetzwerk für Fügetechnik K-Porjekt JOIN4+

Enzinger, N. & Sommitsch, C., 2012, Tagungsband 8. Chemnitzer Symposium Füge- und Schweißtechnik. Chemnitz: Universitätsverlag Chemnitz, p. 27-32

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elektronenstrahlschweißen - Schlüsseltechnologie für High-End Anwendungen

Tändl, J., Beal, C., Enzinger, N. & Sommitsch, C., 2012, Internationaler Fachkongress der Schweiß- und Verbindungstechnik JOIN-EX. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evolution of beta grain size during beta phase processing of Ti-6A1-4V

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 493-496 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evolution of Beta Grain Size During Beta Phase Processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Proceedings of the 12th World Conference on Titanium. Beijing: Science Press, Vol. Volume I. p. 493-496

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of Micro-Crack propagation tn the Nickel based alloy 80A during hot forming by 3D-EBSD

Mitsche, S., Jantscher, K., Sommitsch, C. & Pölt, P., 2012, Electron Probe Microanalysis of Materials Today. ., p. 358-358

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Microstructure and Strength Evolution in G-AlSi7Cu0.5Mg According to Different Heat Treatment Parameters

Krumphals, F., Poletti, M. C., Albu, M., STAUDER, B., Radis, R. & Sommitsch, C., 2012, MMM 2012 -6th International Conference on Multiscale Materials Modeling. ., p. 5-5

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata

Krumphals, A., Sommitsch, C. & Stockinger, M., 2012, (Accepted/In press) 6th European Congress on Computational Methods in Applied Sciences and Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical and experimental investigation of laser assisted side milling of Ti6A14v alloy

Zamani, H., Hermani, J. P., Sonderegger, B. & Sommitsch, C., 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 2. p. 1526-1533 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF LASER ASSISTED SIDE MILLING OF Ti6Al4V ALLOY

Zamani, H., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2012, The Materials Science & Technology 2012 Conference and Exhibition proceedings. Pittsburgh Pennsylvania: Materials Science and Technology (MS&T) 2012, p. 1526-1533

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Prediction of Hot Tearing in Permanent Mold Steel Casting Using a viscoplastic Model with Damage

Hadzic, S. & Sommitsch, C., 2012, Materials Science & Technology Conference and Exhibition. Pittsburgh Pennsylvania: ., p. 86-86

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Zerstörende und zerstörungsfreie Prüfung der Kriechschädigung eines 9% Cr Stahles (Projekt "Hot Pipes")

Pein, C. & Sommitsch, C., 2012, Jahrestagung 2012 Zerstörungsfreie Materialprüfung, Kurzfassungen der Vorträge und Posterbeiträge. ., p. 48-48

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 2011, Proceedings of teh IWOTE'11: International Workshop on Thermal Forming and Welding Distortion. Bremen: BIAS Verlag, Vol. 41. p. 203-214 (Strahltechnik).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction stir welding of magnesium and steel in car body engineering

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 2011, Joining in Car Body Engineering 2011. ., p. 113-128

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 2011, Erfahrungsausstausch Reibschweißen. ., p. 1-17

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten

Krumphals, A., Stockinger, M. & Sommitsch, C., 2011, XXX. Verformungskundliches Kolloquium. ., p. 31-36

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 2011, Tagungsskript Gefüge und Bruch. ., p. 207-217

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 2010, Proceedings EuroSuperalloys 2010 - European Symposium on Superalloys and their Application. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparison of cellular automata and phase field methods for modelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 2010, MMM2010. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Creep strength and microstructural evolution of 9-12% Cr heat resistant steels during creep exposure at 600°C and 650°C

Mendez Martin, F., Panait, C. G., Bendick, W., Albu, M., Sonderegger, B., Sommitsch, C., Gourgues-Lorenzon, A-F., Besson, J. & Fuchsmann, A., 2010, 9th Liege Conference on Materials for Advance Power Engineering. ., p. 261-271

Research output: Chapter in Book/Report/Conference proceedingConference contribution

INFLUENCING WELDING RESIDUAL STRESSES OF HSS BY MECHANICAL POST WELD TREATMENTS

Rahman, M. M., Hütter, A., Enzinger, N. & Sommitsch, C., 2010, (Accepted/In press) IDDRG Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Interaction of the precipitation kinetics of δ and γ' phases in nickel-base superalloy ATI Allvac® 718Plus™

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 9 Feb 2010, THERMEC 2009. p. 2712-2717 6 p. (Materials Science Forum; vol. 638-642).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metadynamic recrystallization of the nickel-based superalloy Allvac 718Plus™

Sommitsch, C., Huber, D. & Stockinger, M., 9 Feb 2010, THERMEC 2009. p. 2327-2332 6 p. (Materials Science Forum; vol. 638-642).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modellierung von Ausscheidungs-Abstandsverteilungen und Anwendung für die Ausscheidungsverfestigung

Sonderegger, B., Sommitsch, C., Holzer, I. & Kozeschnik, E., 2010, High Performance Materials. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling of diffusional creep in polycrystals

Pein, C. & Sommitsch, C., 2010, Proceedings of the 9th Liège Conference on Materials for Advanced Power Engineering. ., p. &-&

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modelling the microstructure evolution of a ferritic hot work tool steel during short-term creep

Krumphals, F., Wurmbauer, H., Wieser, V. & Sommitsch, C., 2010, Proceeding MMM2010. ., p. 458-461

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical analysis of the influence of rolling conditions on the microstructure evolution during hot rolling of aluminium alloy 5083 using a physical model

Sherstnev, P., Melzer, C. & Sommitsch, C., 2010, Proceeding 12th International Conference on Aluminium Alloys. ., p. 542-547

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical Simulation of the Simultaneous Precipitation of Delta and Gamma Prime Phases in the Ni-Base Superalloy ATI Allvac 718 Plus

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, Superalloy 718 and Derivatives. New Jersey, USA: Wiley, p. 569-578

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical simulation of the simultaneous precipitation of δ and γ′ phases in the Ni-base superalloy ATI Allvac®718 Plus™

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 1 Dec 2010, 7th International Symposium on Superalloy 718 and Derivatives 2010. p. 569-578 10 p. (7th International Symposium on Superalloy 718 and Derivatives 2010; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Process Simulation of Aluminium Sheet Metal Deep Drawing at Elevated Temperatures

Winklhofer, J., Trattnig, G., Lind, C., Sommitsch, C. & Feuerhuber, H., 2010, NUMIFORM 2010 Proceedings of the10th International Conference on Numerical Methods in Industrial Forming Processes. American Institute of Physics, p. 927-934

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Rührreibschweißen - Ein innovatives Fügeverfahren für ungleiche Werkstoffpaarungen

Sommitsch, C. & Weinberger, T., 2010, JOIN-EX 2010. Wien: ., p. 120-129

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulation Based Process Optimization of Aluminium Sheet Metal Deep Drawing at Elevated Temperatures

Winklhofer, J., Trattnig, G., Lind, C., Sommitsch, C. & Feuerhuber, H., 2010, Tools and Technologies for the Processing of Ultra High Strength Steels. Verlag der Technischen Universität Graz, p. 789-798

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Simulation of Aluminium Sheet Metal Deep Drawing at Elevated Temperatures using LS-Dyna

Winklhofer, J., Trattnig, G., Lind, C., Sommitsch, C. & Feuerhuber, H., 2010, LS-DYNA Forum. DYNAmore GmbH, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

Ansätze für die Bewertung der Formänderungsverhältnisse beim Schrägwalzen

Pschera, R., Klarner, J. & Sommitsch, C., 2009, Verformungskundliches Kolloquium. ., p. 2215-228

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fast automated 3D EDXS Mapping

Wagner, J., Mitsche, S., Letofsky-Papst, I., Schröttner, H. & Sommitsch, C., 2009, Instrumentation and Methodology. Wien: Facultas, p. 81-82

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grain-subgrain structure analyses of hot deformed superalloy Allvac 718plusTM by EBSD

Mitsche, S., Sommitsch, C., Huber, D., Pölt, P. & Stockinger, M., 2009, Materials Science. Wien: Facultas, p. 257-258

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Interaction of the Precipitation Kinetics of Delta and Gamma Prime Phases in Ni-Base Superalloy ATI Allvac 718 Plus

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2009, Proceedings Thermec 2009 - International Conference on Processing & Manufacturing of Advanced Materials. ., p. 2712-2717

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microstructure evaluation of 12% Cr steel using TEM technique

Mendez Martin, F., Albu, M., Sonderegger, B. & Sommitsch, C., 2009, Matreial Science. Wien: Facultas, p. 233-234

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling the Critical Conditions for the Rolling of Seamless Pipes

Pschera, R., Klarner, J. & Sommitsch, C., 2009, (Accepted/In press) TMS Annual Meeting. .

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modellierung der Strukturentwicklung während des Warmwalzens

Sommitsch, C. & Sherstnev, P., 2009, Proceedings MEFORM 2009 - Herstellung und Weiterverarbeitung von Flachprodukten. ., p. 50-64

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical Modeling of Innovative Joining Processes

Enzinger, N. & Sommitsch, C., 2009, Proceedings of the paper and poster abstract of the first IIW International Congress in Central and East European Region. ., p. 37-37

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Physically based microstructure modelling of AA6082 during hot extrusion

Krumphals, F., Sherstnev, P., Mitsche, S., Randjelovic, S. & Sommitsch, C., 2009, Proceeding International Conference on Extrusion and Benchmark. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulation of the grain structure evolution by cellular automata

Candic, M., Tian, B., Kamaya, M., Winter, G. & Sommitsch, C., 2009, Proceedings 2nd International Conference on Hot Forming of Steels and Product Properties. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2008

Ausscheidungskinetik während der Homogenisierung und Gefügeentwicklung während der Warmumformung der Aluminiumlegierung AA6082

Sherstnev, P., Sommitsch, C., Mitsche, S., Hacksteiner, M. & Ebner, T., 2008, Verformungskundliches Kolloquium. ., p. 123-130

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sherstnev, P., Sommitsch, C., Ebner, T. & Hacksteiner, T., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 579-580 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters

Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A. & Sommitsch, C., 2008, ESAFORM Conference on Material Forming. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contribution