Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

Article

Innovative surface modification of Ti6Al4V alloy by electron beam technique for biomedical application

Ramskogler, C., Warchomicka, F. G., Mostofi, S., Weinberg, A. & Sommitsch, C., 11 Apr 2017, In : Materials science and engineering / C. 78, p. 105 - 113

Research output: Contribution to journalArticleResearchpeer-review

In-situ-Aufschmelz-Methode zur Bestimmung der Hochtemperatureigenschaften von Stählen

Djuric, D., Höller, C., Oberroither, M., Sonderegger, B. & Sommitsch, C., 2012, In : MP Materials Testing. 54, 2, p. 75-79

Research output: Contribution to journalArticleResearchpeer-review

In Situ Formation of TiB2 in Fe-B System with Titanium Addition and Its Influence on Phase Composition, Sintering Process and Mechanical Properties

Skalon, M., Hebda, M., Schrode, B., Resel, R., Kazior, J. & Sommitsch, C., 13 Dec 2019, In : Materials. 12, 12 p., 4188.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Borides
Titanium
Phase composition
Boron
Sintering

Interaction of recrystallization and precipitation during hot forming of alloy 80A

Sommitsch, C., Pölt, P., Rüf, G., Mitsche, S. & Albu, M., 2007, In : Materials Science Forum. 539-543, p. 2988-2993

Research output: Contribution to journalArticleResearchpeer-review

Interaction of the Precipitation Kinetics of Delta and Gamma Prime Phases in Nickel-Base Superalloy ATI Allvac 718 Plus

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, In : Materials Science Forum. 638-642, p. 2712-2717

Research output: Contribution to journalArticleResearchpeer-review

Investigation of creep damage in advanced martensitic chromium steel weldments using synchrotron X-ray micro-tomography and EBSD

Schlacher, C., Pelzmann, T., Beal, C., Sommitsch, C., Gupta, C., Toda, H. & Mayr, P., 2015, In : Materials science and technology. 31, 5, p. 516-521

Research output: Contribution to journalArticleResearchpeer-review

Investigation of Retained Strains during Multipass Deformation

Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007, In : Materials Science Forum. 558/559, p. 485-490

Research output: Contribution to journalArticleResearchpeer-review

Investigation on the microstructural evolution in a Medium-Mn steel (X10Mn5) after intercritical annealing

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2015, In : HTM - journal of heat treatment and materials. 70, 1, p. 19-25

Research output: Contribution to journalArticleResearch

Investigations into the delayed fracture susceptibility of 34CrNiMo6 steel, and the opportunities for its application in ultra-high-strength bolts and fasteners

Kuduzovic, A., Poletti, M. C., Sommitsch, C., Domankova, M., Mitsche, S. & Kienreich, R., 2014, In : Materials science and engineering / A. 590, p. 66-73

Research output: Contribution to journalArticleResearchpeer-review

Lehrstuhl für Umformtechnik

Buchmayr, B., Harrer, O-K. & Sommitsch, C., 2006, In : Berg- und hüttenmännische Monatshefte. 151, 7, p. 271-275

Research output: Contribution to journalArticleResearchpeer-review

Lifetime evaluation of two different hot work tool steels in aluminium extrusion

Sommitsch, C., Sievert, R., Wlanis, T. & Redl, C., 2008, In : Computational materials science. 43, 1, p. 82-91

Research output: Contribution to journalArticleResearchpeer-review

Loss of Ductility Caused by AlN Precipitation in Hadfield Steel

Radis, R., Schlacher, C., Kozeschnik, E., Mayr, P., Enzinger, N., Schröttner, H. & Sommitsch, C., 2012, In : Metallurgical and materials transactions / A. 43, 4, p. 1132-1139

Research output: Contribution to journalArticleResearchpeer-review

Metadynamic recrystallization of the nickel-based superalloy Allvac 718PlusTM

Sommitsch, C., Huber, D. & Stockinger, M., 2010, In : Materials Science Forum. 638-642, p. 2327-2332

Research output: Contribution to journalArticleResearchpeer-review

Microstructure development in hot deformed AA6082

Poletti, M. C., Rodriguez-Hortalá, M., Hauser, M. & Sommitsch, C., 2011, In : Materials science and engineering / A. 528, p. 2423-2430

Research output: Contribution to journalArticleResearchpeer-review

Microstructure Evolution and Hardness Distribution in Al Wires Subjected to Simultaneous Tension-Torsion Deformation

Pourbashiri, M., Sedighi, M., Poletti, M. C. & Sommitsch, C., 2015, In : Key engineering materials. 651-653, p. 771-776

Research output: Contribution to journalArticleResearchpeer-review

Microstructure evolution and Precipitation modeling in Ni-based alloy C-263

Vujic, S., Beal, C., Di Martino, F., Hogg, S., Matera, S., Tassa, O., Zurek, J. & Sommitsch, C., 2014, In : Materials Science Forum. p. 2219-2224

Research output: Contribution to journalArticleResearchpeer-review

Mikrostrukturelle Modellierung der Warmumformung

Buchmayr, B., Auzinger, D., Samoilov, A. & Sommitsch, C., 2001, In : Berg- und hüttenmännische Monatshefte. 146, 9, p. 385-392

Research output: Contribution to journalArticleResearchpeer-review

Modeling and Investigation of Dynamic Recrystallisation in Nickel-Based Superalloys

Sommitsch, C., Walter, M., Wedl, F. & Kleber, S., 2003, In : Materials Science Forum. 426/432, p. 743-748

Research output: Contribution to journalArticleResearchpeer-review

Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2013, In : Materials Science Forum. 753, p. 353-356

Research output: Contribution to journalArticleResearchpeer-review

Modeling of grain growth in one and two phase materials by 2D cellular automata

Sommitsch, C., Krumphals, A., Candic, M., Tian, B. & Stockinger, M., 1 Sep 2012, In : Journal of Computational and Theoretical Nanoscience. 9, 9, p. 1515-1524 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Grain Growth
cellular automata
Cellular automata
Grain growth
Cellular Automata

Modeling of the Vacuum Arc Remelting process at Böhler Edelstahl GmbH

Sommitsch, C., 1 Jan 2004, PAMTalk, p. 12-13.

Research output: Contribution to specialist publicationArticleResearch

Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F. G., Stockinger, M. & Sommitsch, C., 2014, In : International journal for multiscale computational engineering. 12, 1, p. 23-31

Research output: Contribution to journalArticleResearchpeer-review

Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 2012, In : Materials Science Forum. 706-709, p. 1521-1526

Research output: Contribution to journalArticleResearchpeer-review

Modeling surface rolling contact fatigue crack initiation taking severe plastic shear deformation into account

Trummer, G., Marte, C., Dietmaier, P., Sommitsch, C. & Six, K., 17 Feb 2016, In : Wear. 352-353, p. 136 - 145

Research output: Contribution to journalArticleResearchpeer-review

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 15 Nov 2016, In : Wear. 366-367, p. 71-77 7 p.

Research output: Contribution to journalArticleResearchpeer-review

crack initiation
Crack initiation
rails
Wear of materials
Fatigue of materials

Modellierung der Rekristallisationskinetik während der Warmumformung der Aluminiumlegierung 5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, In : Berg- und hüttenmännische Monatshefte. 153, 11, p. 439-442

Research output: Contribution to journalArticleResearchpeer-review

Modelling ductile damage of a Ni-base alloy considering the microstructure evolution during hot working

Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, In : Steel grips. 4, 1, p. 56-63

Research output: Contribution to journalArticleResearch

Modelling of microstructure evolution in hot work tool steels during service

Krumphals, F., Wlanis, T., Sommitsch, C., Holzer, I., Sonderegger, B. & Wieser, V., 2009, In : Computer methods in materials science = Informatyka w technologii materialów. 9, p. 228-233

Research output: Contribution to journalArticleResearch

Modelling of recrystallization nucleation at hard inclusions

Mitter, W. & Sommitsch, C., 2012, In : Materials Science Forum. 715-716, p. 593-598

Research output: Contribution to journalArticleResearchpeer-review

Modelling the dynamic recrystallization in C–Mn micro-alloyed steel during thermo-mechanical treatment using cellular automata

Timoshenkov, A., Warczok, P., Albu, M., Klarner, J., Kozeschnik, E., Bureau, R. & Sommitsch, C., 2014, In : Computational materials science. p. 85-94

Research output: Contribution to journalArticleResearchpeer-review

Modelling the Forming Limit during Cross-Rolling of Seamless Pipes Using a modified Continuum Damage Mechanics Approach

Pschera, R., Klarner, J. & Sommitsch, C., 2010, In : Steel research international. 81, p. 686-690

Research output: Contribution to journalArticleResearchpeer-review

Multichannel diffusion vs TDS model on example of energy spectra of bound hydrogen in 34CrNiMo6 steel after a typical heat treatment

Belyaev, A. K., Polyanskiy, A. M., Polyanskiy, V. A., Sommitsch, C. & Yakovlev, Y. A., 2016, In : International Journal of Hydrogen Energy. 41 , 20, p. 8627-8634

Research output: Contribution to journalArticleResearchpeer-review

Neue Fügetechniken mit höherer Prozesssicherheit

Sommitsch, C., Posch, G., Weinberger, T. & Figner, G., 2010, In : Berg- und hüttenmännische Monatshefte. 155, 5, p. 213-220

Research output: Contribution to journalArticleResearchpeer-review

Numerical Simulation of Material Flow in AA6082 During Friction Stir Spot Welding

Gao, Z., Wang, P., Cheng, D., Niu, J. & Sommitsch, C., 2015, In : Engineering Review. Vol. 35, Issue 3, p. 283-289

Research output: Contribution to journalArticleResearchpeer-review

File
Spot welding
Friction
Computer simulation
Strain rate
Compaction

On modelling of dynamic recrystallisation of fcc materials with low stocking fault energy

Sommitsch, C. & Mitter, W., 2006, In : Acta materialia. 54, 2, p. 357-375

Research output: Contribution to journalArticleResearchpeer-review

On the Damage Behavior of a 0.1C6Mn Medium-Mn Steel

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 2018, In : Steel research international. 89, 9, 1700378.

Research output: Contribution to journalArticleResearchpeer-review

On the determination of recrystallised fraction during hot forming

Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, In : Steel grips. 3, p. 287-293

Research output: Contribution to journalArticleResearch

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 29 Jul 2017, In : Acta materialia. 139 (2017), p. 39 - 50 139 (2017).

Research output: Contribution to journalArticleResearchpeer-review

On the modelling of the interaction of materials softening and ductile damage during hot working of Alloy 80A

Sommitsch, C., Pölt, P., Mitsche, S. & Rüf, G., 2006, In : Journal of materials processing technology. 177, p. 282-286

Research output: Contribution to journalArticleResearchpeer-review

Optimized microstructure for an increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G. & Sommitsch, C., 2015, In : Materials at high temperatures. 32, 3;32.03, p. 318-322

Research output: Contribution to journalArticleResearchpeer-review

Physical and Numerical Simulations of the Microstructure Evolution in AA6082 During Friction Stir Processing by Means of Hot Torsion and FEM

Krumphals, F., Gao, Z., Zamani, H., Mitsche, S., Enzinger, N. & Sommitsch, C., 2013, In : Materials Science Forum. 762, p. 590-595

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Physical based microstructure modelling coupled with nucleation theory during and after hot forming of AA5083

Sherstnev, P., Sommitsch, C., Mitsche, S. & Melzer, C., 2010, In : Advanced Materials Research. 89-91, p. 509-514

Research output: Contribution to journalArticleResearchpeer-review

Physically based microstructure modelling of AA6082 during hot extrusion

Krumphals, F., Sherstnev, P., Mitsche, S., Randjelovic, S. & Sommitsch, C., 2010, In : Key engineering materials. 424, p. 27-34

Research output: Contribution to journalArticleResearchpeer-review

Physikalische Simulation der mehrstufigen Primärumformung von Alloy 80a

Wasle, G., Sommitsch, C., Kleber, S., Buchmayr, B. & Clemens, H., 2003, In : Berg- und hüttenmännische Monatshefte. 148, p. 293-298

Research output: Contribution to journalArticleResearchpeer-review

Precipitation evolution and creep strength modelling of 25Cr20NiNbN austenitic steel

Vujic, S., Sandström, R. & Sommitsch, C., 1 Nov 2015, In : Materials at high temperatures. 32, 6, p. 607-618 12 p.

Research output: Contribution to journalArticleResearchpeer-review

creep strength
Austenitic steel
hardening
Creep
steels

Prediction of precipitation kinetics during homogenisation and microstructure evolution during and after hot rolling of AA5083

Sherstnev, P., Melzer, C. & Sommitsch, C., 2012, In : International journal of mechanical sciences. 54, 1, p. 12-19

Research output: Contribution to journalArticleResearchpeer-review