Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F. G., Stockinger, M. & Sommitsch, C., 2014, In : International journal for multiscale computational engineering. 12, 1, p. 23-31

Research output: Contribution to journalArticleResearchpeer-review

Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata

Krumphals, A., Sommitsch, C. & Stockinger, M., 2012, (Accepted/In press) 6th European Congress on Computational Methods in Applied Sciences and Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 15 Oct 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata

Krumphals, A., Stockinger, M. & Sommitsch, C., 10 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 2012, In : Materials Science Forum. 706-709, p. 1521-1526

Research output: Contribution to journalArticleResearchpeer-review

Modeling single-side inflating of flow channels in roll-bonded aluminum panels

Domitner, J., Auer, P., Eckhard, R., Ferčec, J. & Sommitsch, C., 2019, (Submitted) Proceedings of the 13th International Conference on Numerical Methods in Industrial Forming Processes.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling surface rolling contact fatigue crack initiation taking severe plastic shear deformation into account

Trummer, G., Marte, C., Dietmaier, P., Sommitsch, C. & Six, K., 17 Feb 2016, In : Wear. 352-353, p. 136 - 145

Research output: Contribution to journalArticleResearchpeer-review

Modeling the Critical Conditions for the Rolling of Seamless Pipes

Pschera, R., Klarner, J. & Sommitsch, C., 2009, (Accepted/In press) TMS Annual Meeting. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 30 Aug 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 2015, International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modellierung der duktilen Schädigung einer Nickelbasislegierung unter Berücksichtigung der Werkstoffentfestigung bei der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 4 Mar 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der duktilen Schädigung in der Warmumformung und Parameteridentifikation mittels inverser Analyse

Pschera, R. & Sommitsch, C., 2 Oct 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der duktilen Schädigung während der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 2006.

Research output: Contribution to conferencePosterResearch

Modellierung der Kinetik von Korn- und Phasengrenzen im Zweiphasengebiet von Ti-6Al-4V zur Vorhersage der Kornvergröberung mittels zellularem Automaten

Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 16 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der Rekristallisationskinetik während der Warmumformung der Aluminiumlegierung 5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, In : Berg- und hüttenmännische Monatshefte. 153, 11, p. 439-442

Research output: Contribution to journalArticleResearchpeer-review

Modellierung der Strukturentwicklung während des Warmwalzens

Sommitsch, C. & Sherstnev, P., 2009, Proceedings MEFORM 2009 - Herstellung und Weiterverarbeitung von Flachprodukten. ., p. 50-64

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modellierung der Strukturentwicklung während des Warmwalzens

Sommitsch, C. & Sherstnev, P., 25 Mar 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der Werkstoffschädigung während der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 29 Feb 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der Werkstoffschädigung während der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 2004, Verformungskundliches Kolloquium. ., p. 165-176

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Modellierung des Warmwalzens von Nickel-Basis-Legierungen

Sommitsch, C. & Buchmayr, B., 1998, Verformungskundliches Kolloquium. Leoben: VKH, p. NN-NN

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modellierung und Simulation des Lochbildungsprozesses während des Schrägwalzens unter Nutzung eines Schädigungsmodells in Forge2007

Pschera, R., Klarner, J. & Sommitsch, C., 2008, Simulation von Umformprozessen. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modellierung von Ausscheidungs – Abständen in komplexen Systemen

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 13 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung von Ausscheidungs-Abstandsverteilungen und Anwendung für die Ausscheidungsverfestigung

Sonderegger, B., Sommitsch, C., Holzer, I. & Kozeschnik, E., 4 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung von Ausscheidungs-Abstandsverteilungen und Anwendung für die Ausscheidungsverfestigung

Sonderegger, B., Sommitsch, C., Holzer, I. & Kozeschnik, E., 2010, High Performance Materials. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 2014, (Accepted/In press) Electric Power Research Institute (EPRI). .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 22 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling and Simulation of Strengthening in Complex Martensitic 9-12% Cr Steel and a Binary Fe-Cu Alloy

Holzer, I., Sommitsch, C. (ed.), Reichmann, K. (ed.) & Hofer, F. (ed.), 2010, 1 ed. Graz: Verlag der Technischen Universität Graz. (Monographic series TU Graz : Advanced materials science ; vol. 2)

Research output: Book/ReportBookResearch

Modelling ductile damage of a Ni-base alloy considering the microstructure evolution during hot working

Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, In : Steel grips. 4, 1, p. 56-63

Research output: Contribution to journalArticleResearch

Modelling of Beta Grain Coarsening in Ti-6Al-4V during Isothermal Heat Treatment

Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 2010.

Research output: Contribution to conferencePosterResearch

Modelling of creep-fatigue in containers during aluminium and copper extrusion

Sommitsch, C., Sievert, R., Wlanis, T., Günther, B. & Wieser, V., 19 Sep 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of creep-fatigue in extrusion dies

Sommitsch, C., Wlanis, T. & Wieser, V., 7 Mar 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of diffusional creep in polycrystals

Pein, C. & Sommitsch, C., 2010, Proceedings of the 9th Liège Conference on Materials for Advanced Power Engineering. ., p. &-&

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of diffusional creep in polycrystals - Poster

Pein, C. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Modelling of ductile damage during cross-rolling of seamless pipes

Pschera, R., Klarner, J. & Sommitsch, C., 18 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of microstructure evolution in hot work tool steels during service

Krumphals, F., Wlanis, T., Sommitsch, C., Holzer, I., Sonderegger, B. & Wieser, V., 2009, In : Computer methods in materials science = Informatyka w technologii materialów. 9, p. 228-233

Research output: Contribution to journalArticleResearch

Modelling of recrystallization nucleation at hard inclusions

Mitter, W. & Sommitsch, C., 4 Jul 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of recrystallization nucleation at hard inclusions

Mitter, W. & Sommitsch, C., 2012, In : Materials Science Forum. 715-716, p. 593-598

Research output: Contribution to journalArticleResearchpeer-review

Modelling of structure evolution and mechanical properties during thermo-mechanic processing of the α−β titanium alloy Ti-6Al-4V

Krumphals, A. & Sommitsch, C., 25 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of Structure Evolution during Hot Working of AA5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, Aluminium Alloys - their Physical and Mechanical Properties ; Vol. 1. Wiley-VCH , p. 1077-1084

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of Structure Evolution during Hot Working of AA5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 22 Sep 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

Halici, D., Prodinger, D., Poletti, M. C., Huber, D., Stockinger, M. & Sommitsch, C., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

Halici, D., Prodinger, D., Poletti, M. C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Advanced Materials Research. Trans Tech Publications Ltd., Vol. 783-786. p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

hot working
Hot working
titanium alloys
Titanium alloys
damage

Modelling of the Vacuum Arc Remelting with calcosoft-2D

Sommitsch, C., Maronnier, V., Reiter, G., Gäumann, M. & Schützenhöfer, W., 2003, European Conference & Exhibition on Digital Simulation for Virtual Prototyping, Virtual Manufacturing and Virtual Environment. ., p. CD-CD

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of the Vacuum Arc Remelting with calcosoft-2D

Sommitsch, C., Maronnier, V., Reiter, G., Gäumann, M. & Schützenhöfer, W., 16 Oct 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling Recrystallization of Nickel-Base Alloys

Sommitsch, C., Mitter, W. & Kleber, S., 2000, Werkstoffwoche. ., p. Internet-Internet

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling the dynamic recrystallization in C–Mn micro-alloyed steel during thermo-mechanical treatment using cellular automata

Timoshenkov, A., Warczok, P., Albu, M., Klarner, J., Kozeschnik, E., Bureau, R. & Sommitsch, C., 2014, In : Computational materials science. p. 85-94

Research output: Contribution to journalArticleResearchpeer-review

Modelling the flow stress of aluminum alloys during hot and cold deformation

Bureau, R., Poletti, M. C. & Sommitsch, C., 11 Jan 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling the Forming Limit during Cross-Rolling of Seamless Pipes using a Modified Continuum Damage Mechanics Approach

Pschera, R., Klarner, J. & Sommitsch, C., 8 Sep 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch