Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

Numerical simulation and experimental validation of self-piercing riveting (SPR) of 6xxx aluminium alloys for automotive applications

Hönsch, F., Domitner, J., Sommitsch, C., Götzinger, B. & Kölz, M., 2018, In : Journal of Physics / Conference Series. 1063, p. 012081-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Numerical Modelling of Innovative Joining Processes

Enzinger, N. & Sommitsch, C., 14 Oct 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Modeling of the Delta Phase Precipitation Kinetic in the Superalloy Allvac718Plus

Stockinger, M., Stotter, C., Sommitsch, C., Kozeschnik, E., Radis, R. & Huber, D., 23 Jun 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Modeling of Innovative Joining Processes

Enzinger, N. & Sommitsch, C., 2009, Proceedings of the paper and poster abstract of the first IIW International Congress in Central and East European Region. ., p. 37-37

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF LASER ASSISTED SIDE MILLING OF Ti6Al4V ALLOY

Zamani, H., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2012, The Materials Science & Technology 2012 Conference and Exhibition proceedings. Pittsburgh Pennsylvania: Materials Science and Technology (MS&T) 2012, p. 1526-1533

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical and experimental investigation of laser assisted side milling of Ti6A14v alloy

Zamani, H., Hermani, J. P., Sonderegger, B. & Sommitsch, C., 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 2. p. 1526-1533 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Milling (machining)
Lasers
Laser beams
Wear of materials
Constitutive models

Numerical Analysis of the influence of rolling conditions on the microstructure evolution during hot rolling of aluminium alloy 5083 using a physical model

Sherstnev, P., Melzer, C. & Sommitsch, C., 5 Sep 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical analysis of the influence of rolling conditions on the microstructure evolution during hot rolling of aluminium alloy 5083 using a physical model

Sherstnev, P., Melzer, C. & Sommitsch, C., 2010, Proceeding 12th International Conference on Aluminium Alloys. ., p. 542-547

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

New Developments in the Design and Production of Container Assemblies

Wieser, V., Sommitsch, C., Haberfellner, K. & Lehofer, H., 2004, International Aluminum Extrusion Technology Seminar. ., p. 309-316

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

New Developments in the Design and Production of Container Assemblies

Wieser, V., Sommitsch, C., Haberfellner, K. & Lehofer, H., 18 May 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Neue Fügetechniken mit höherer Prozesssicherheit

Sommitsch, C., Posch, G., Weinberger, T. & Figner, G., 2010, In : Berg- und hüttenmännische Monatshefte. 155, 5, p. 213-220

Research output: Contribution to journalArticleResearchpeer-review

Multichannel diffusion vs TDS model on example of energy spectra of bound hydrogen in 34CrNiMo6 steel after a typical heat treatment

Belyaev, A. K., Polyanskiy, A. M., Polyanskiy, V. A., Sommitsch, C. & Yakovlev, Y. A., 2016, In : International Journal of Hydrogen Energy. 41 , 20, p. 8627-8634

Research output: Contribution to journalArticleResearchpeer-review

Modelling the microstructure evolution of a ferritic hot work tool steel during short-term creep

Krumphals, F., Wurmbauer, H., Wieser, V. & Sommitsch, C., 2010, Proceeding MMM2010. ., p. 458-461

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling the Forming Limit during Cross-Rolling of Seamless Pipes Using a modified Continuum Damage Mechanics Approach

Pschera, R., Klarner, J. & Sommitsch, C., 2010, In : Steel research international. 81, p. 686-690

Research output: Contribution to journalArticleResearchpeer-review

Modelling the Forming Limit during Cross-Rolling of Seamless Pipes using a Modified Continuum Damage Mechanics Approach

Pschera, R., Klarner, J. & Sommitsch, C., 8 Sep 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling the flow stress of aluminum alloys during hot and cold deformation

Bureau, R., Poletti, M. C. & Sommitsch, C., 11 Jan 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling the dynamic recrystallization in C–Mn micro-alloyed steel during thermo-mechanical treatment using cellular automata

Timoshenkov, A., Warczok, P., Albu, M., Klarner, J., Kozeschnik, E., Bureau, R. & Sommitsch, C., 2014, In : Computational materials science. p. 85-94

Research output: Contribution to journalArticleResearchpeer-review

Modelling Recrystallization of Nickel-Base Alloys

Sommitsch, C., Mitter, W. & Kleber, S., 2000, Werkstoffwoche. ., p. Internet-Internet

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of the Vacuum Arc Remelting with calcosoft-2D

Sommitsch, C., Maronnier, V., Reiter, G., Gäumann, M. & Schützenhöfer, W., 16 Oct 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of the Vacuum Arc Remelting with calcosoft-2D

Sommitsch, C., Maronnier, V., Reiter, G., Gäumann, M. & Schützenhöfer, W., 2003, European Conference & Exhibition on Digital Simulation for Virtual Prototyping, Virtual Manufacturing and Virtual Environment. ., p. CD-CD

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

Halici, D., Prodinger, D., Poletti, M. C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Advanced Materials Research. Trans Tech Publications Ltd., Vol. 783-786. p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

hot working
Hot working
titanium alloys
Titanium alloys
damage

Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

Halici, D., Prodinger, D., Poletti, M. C., Huber, D., Stockinger, M. & Sommitsch, C., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of Structure Evolution during Hot Working of AA5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, Aluminium Alloys - their Physical and Mechanical Properties ; Vol. 1. Wiley-VCH , p. 1077-1084

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of Structure Evolution during Hot Working of AA5083

Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 22 Sep 2008.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of structure evolution and mechanical properties during thermo-mechanic processing of the α−β titanium alloy Ti-6Al-4V

Krumphals, A. & Sommitsch, C., 25 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of recrystallization nucleation at hard inclusions

Mitter, W. & Sommitsch, C., 2012, In : Materials Science Forum. 715-716, p. 593-598

Research output: Contribution to journalArticleResearchpeer-review

Modelling of recrystallization nucleation at hard inclusions

Mitter, W. & Sommitsch, C., 4 Jul 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of microstructure evolution in hot work tool steels during service

Krumphals, F., Wlanis, T., Sommitsch, C., Holzer, I., Sonderegger, B. & Wieser, V., 2009, In : Computer methods in materials science = Informatyka w technologii materialów. 9, p. 228-233

Research output: Contribution to journalArticleResearch

Modelling of ductile damage during cross-rolling of seamless pipes

Pschera, R., Klarner, J. & Sommitsch, C., 18 Nov 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of diffusional creep in polycrystals - Poster

Pein, C. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Modelling of diffusional creep in polycrystals

Pein, C. & Sommitsch, C., 2010, Proceedings of the 9th Liège Conference on Materials for Advanced Power Engineering. ., p. &-&

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of creep-fatigue in extrusion dies

Sommitsch, C., Wlanis, T. & Wieser, V., 7 Mar 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of creep-fatigue in containers during aluminium and copper extrusion

Sommitsch, C., Sievert, R., Wlanis, T., Günther, B. & Wieser, V., 19 Sep 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of Beta Grain Coarsening in Ti-6Al-4V during Isothermal Heat Treatment

Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 2010.

Research output: Contribution to conferencePosterResearch

Modelling ductile damage of a Ni-base alloy considering the microstructure evolution during hot working

Rüf, G., Sommitsch, C. & Buchmayr, B., 2006, In : Steel grips. 4, 1, p. 56-63

Research output: Contribution to journalArticleResearch

Modelling and Simulation of Strengthening in Complex Martensitic 9-12% Cr Steel and a Binary Fe-Cu Alloy

Holzer, I., Sommitsch, C. (ed.), Reichmann, K. (ed.) & Hofer, F. (ed.), 2010, 1 ed. Graz: Verlag der Technischen Universität Graz. (Monographic series TU Graz : Advanced materials science ; vol. 2)

Research output: Book/ReportBookResearch

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 22 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Stojan, V., Coline, B., Christof, S., Farooq, M., Rolf, S. & Joanna, Z., 1 Jan 2014, p. 1163-1172. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

Austenitic steel
Precipitates
Creep
Optical microscopy
Aging of materials

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 2014, (Accepted/In press) Electric Power Research Institute (EPRI). .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modellierung von Ausscheidungs-Abstandsverteilungen und Anwendung für die Ausscheidungsverfestigung

Sonderegger, B., Sommitsch, C., Holzer, I. & Kozeschnik, E., 4 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung von Ausscheidungs-Abstandsverteilungen und Anwendung für die Ausscheidungsverfestigung

Sonderegger, B., Sommitsch, C., Holzer, I. & Kozeschnik, E., 2010, High Performance Materials. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modellierung von Ausscheidungs – Abständen in komplexen Systemen

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 13 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung und Simulation des Lochbildungsprozesses während des Schrägwalzens unter Nutzung eines Schädigungsmodells in Forge2007

Pschera, R., Klarner, J. & Sommitsch, C., 2008, Simulation von Umformprozessen. ., p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modellierung des Warmwalzens von Nickel-Basis-Legierungen

Sommitsch, C. & Buchmayr, B., 1998, Verformungskundliches Kolloquium. Leoben: VKH, p. NN-NN

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modellierung des Aluminium- und Kupfer-Strangpressens unter dem Aspekt der Lebensdauervorhersage der Werkzeuge und Rezipienten – Teil 2

Sommitsch, C., Wlanis, T., Krumphals, F. & Planitzer, F., 2006, .

Research output: Book/ReportOther reportResearch

Modellierung der Werkstoffschädigung während der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 29 Feb 2004.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung der Werkstoffschädigung während der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 2004, Verformungskundliches Kolloquium. ., p. 165-176

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Modellierung der Strukturentwicklung während des Warmwalzens

Sommitsch, C. & Sherstnev, P., 25 Mar 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch