Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

Preface

Ofenheimer, A., Poletti, C., Schalk-Kitting, D. & Sommitsch, C., 2015, In : Key engineering materials. 651-653

Research output: Contribution to journalEditorialResearchpeer-review

Preface

Sommitsch, C., Ionescu, M., Mishra, B., Kozeschnik, E. & Chandra, T., 1 Jan 2017, In : Materials Science Forum. 879

Research output: Contribution to journalEditorialResearch

Prediction of precipitation kinetics during homogenisation and microstructure evolution during and after hot rolling of AA5083

Sherstnev, P., Melzer, C. & Sommitsch, C., 2012, In : International journal of mechanical sciences. 54, 1, p. 12-19

Research output: Contribution to journalArticleResearchpeer-review

Prediction of Hot Tearing in Permanent Mold Steel Casting Using a viscoplastic Model with Damage

Hadzic, S. & Sommitsch, C., 2012, Materials Science & Technology Conference and Exhibition. Pittsburgh Pennsylvania: ., p. 86-86

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Precipitation evolution and creep strength modelling of 25Cr20NiNbN austenitic steel

Vujic, S., Sandström, R. & Sommitsch, C., 1 Nov 2015, In : Materials at high temperatures. 32, 6, p. 607-618 12 p.

Research output: Contribution to journalArticleResearchpeer-review

creep strength
Austenitic steel
hardening
Creep
steels

Pitting corrosion behaviour of stainless steel AISI 304 with different tinting colours

Godavarthy Anantha Venkata, R. K. P., Gsellmann, B., Vallant, R. & Sommitsch, C., 25 May 2017, ESSC & DUPLEX 2017: 9th European Stainless Steel Conference - Science & Market / 5th European Duplex Stainless Steel Conference & Exhibition. Bergamo, p. 1-9 9 p. 026

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Open Access
File
Pitting
Stainless steel
Corrosion
Color
Corrosion resistance

Physikalische und numerische Simulation der mehrstufigen Primärumformung (Cogging) einer Nickel-Basis-Superlegierung

Wasle, G., Buchmayr, B., Clemens, H., Sommitsch, C. & Kleber, S., 2003, Werkstofftagung. ., p. 65-78 (Modellbildung und Simulation in der Werkstoff-, Schweiß- und Umformtechnik).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Physikalische und numerische Simulation der mehrstufigen Primärumformung

Wasle, G., Buchmayr, B., Sommitsch, C., Clemens, H. & Kleber, S., 19 Apr 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physikalische Simulation der mehrstufigen Primärumformung von Alloy 80a

Wasle, G., Sommitsch, C., Kleber, S., Buchmayr, B. & Clemens, H., 2003, In : Berg- und hüttenmännische Monatshefte. 148, p. 293-298

Research output: Contribution to journalArticleResearchpeer-review

Physikalisch basierte Modellierung der Gefügeentwicklung während des Warmwalzens von Aluminiumlegierungen

Sherstnev, P. & Sommitsch, C., 2 Oct 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physical Simulation of the Hot Ductility of In-situ Solidified Steels

Caliskanoglu, O., Ilie, S., Beal, C. & Sommitsch, C., 16 Jun 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physical Simulation of Hot Ductility of Continuous Cast Steels with in-situ solidified Hot Tensile Test

Djuric, D., Sommitsch, C., Zamberger, S. & Stiefler, F., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Physically based microstructure modelling of AA6082 during hot extrusion

Krumphals, F., Sherstnev, P., Mitsche, S., Randjelovic, S. & Sommitsch, C., 2009, Proceeding International Conference on Extrusion and Benchmark. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Physically based microstructure modelling of AA6082 during hot extrusion

Krumphals, F., Sherstnev, P., Mitsche, S., Randjelovic, S. & Sommitsch, C., 2010, In : Key engineering materials. 424, p. 27-34

Research output: Contribution to journalArticleResearchpeer-review

Physical based microstructure modelling during the hot rolling of aluminium alloys

Sherstnev, P. & Sommitsch, C., 1 Oct 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physical based microstructure modelling coupled with nucleation theory during and after hot forming of AA5083

Sherstnev, P., Sommitsch, C., Mitsche, S. & Melzer, C., 2010, In : Advanced Materials Research. 89-91, p. 509-514

Research output: Contribution to journalArticleResearchpeer-review

Physical based microstructure modelling coupled with nucleation theory during and after hot forming of AA5083

Sherstnev, P., Sommitsch, C., Mitsche, S. & Melzer, C., 25 Aug 2009.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physical based creep strain modelling of 9%Cr martensitic steel

Yadav, S. D., Schuler, M., Sommitsch, C. & Poletti, M. C., 2014, (Accepted/In press) ECCC International Conference on Creep and Fracture in High Temperature Components: Design & Life Assessment Issues. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Physical and Numerical Simulations of the Microstructure Evolution in AA6082 During Friction Stir Processing by Means of Hot Torsion and FEM

Krumphals, F., Gao, Z., Zamani, H., Mitsche, S., Enzinger, N. & Sommitsch, C., 2013, In : Materials Science Forum. 762, p. 590-595

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Particle Distance Distributions and Their Effect on Precipitate Strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 17 Jan 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Particle distance distributions and their effect on precipitate strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 2 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Osteoblastic cell behaviour on surface structured titanium alloys obtained by electron beam technique

Ramskogler, C., Mostofi, S., Warchomicka, F. G., Weinberg, A. & Sommitsch, C., 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Optimized rod rolling to achieve desired mechanical properties

Sommitsch, C., Roveda, M., Gaudenzi, N. & Buchmayr, B., 25 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Optimized rod rolling to achieve desired mechanical properties

Sommitsch, C., Roveda, M., Gaudenzi, N. & Buchmayr, B., 2005, International Conference of Simulation and Modelling of Metallurgical Processes in Steelmaking. ., p. 407-419

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Optimized microstructure for an increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G. & Sommitsch, C., 11 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Optimized microstructure for an increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G. & Sommitsch, C., 2015, In : Materials at high temperatures. 32, 3;32.03, p. 318-322

Research output: Contribution to journalArticleResearchpeer-review

Optical Surface Analysis of Steel during Hot Compression: A Test to Determine Crack Initiation

Pschera, R., Sommitsch, C. & Winter, G., 2007.

Research output: Contribution to conferencePosterResearch

On the Theory of Microstructure Changes in Metals: Hardening, Recovery, Grain Boundary Motion, and Recrystallization

Mitter, W. & Sommitsch, C., 2011, 1 ed. Graz: Verlag der Technischen Universität Graz. (Advanced Materials Science)

Research output: Book/ReportBookResearch

On the retained strain during multipass hot deformation for the austenitic stainless steel 304 L

Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007.

Research output: Contribution to conferencePosterResearch

On the modelling of the interaction of materials softening and ductile damage during hot working of Alloy 80A

Sommitsch, C., Pölt, P., Mitsche, S. & Rüf, G., 2006, In : Journal of materials processing technology. 177, p. 282-286

Research output: Contribution to journalArticleResearchpeer-review

On the microstructural characteristics influencing the yielding behavior of ultra-fine grained medium-Mn steels

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 29 Jul 2017, In : Acta materialia. 139 (2017), p. 39 - 50 139 (2017).

Research output: Contribution to journalArticleResearchpeer-review

On the determination of recrystallised fraction during hot forming

Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, In : Steel grips. 3, p. 287-293

Research output: Contribution to journalArticleResearch

On the Damage Behavior of a 0.1C6Mn Medium-Mn Steel

Steineder, K., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 2018, In : Steel research international. 89, 9, 1700378.

Research output: Contribution to journalArticleResearchpeer-review

On Modelling the Microstructure Evolution of a Ferritic Hot-Work Tool Steel during Short-Term Creep

Krumphals, F., Wurmbauer, H., Wieser, V. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

On modelling of dynamic recrystallisation of fcc materials with low stocking fault energy

Sommitsch, C. & Mitter, W., 2006, In : Acta materialia. 54, 2, p. 357-375

Research output: Contribution to journalArticleResearchpeer-review

On meta-dynamic and static recrystallisation of the nickel based alloy 80a

Sommitsch, C., Pölt, P., Mitsche, S. & Kleber, S., 12 Sep 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Online-Simulation der Produktion von Nahtlosrohren entlang der Prozesskette mit einer CPE - Stoßbankanlage

Timoshenkov, A., Sommitsch, C. & Sonderegger, B., 16 Nov 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 2011, Erfahrungsausstausch Reibschweißen. ., p. 1-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 1 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical study on destructive testing of self-piercing rivet joints

Domitner, J., Woltsche, C., Hönsch, F. & Sommitsch, C., 2018, Proceedings of the International Conference on Experimental Solid Mechanics 2018.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Numerical Simulation of the VAR Process with calcosoft-2D and its Validation

Reiter, G., Maronnier, V., Sommitsch, C., Gäumann, M., Schützenhöfer, W. & Schneider, R., 21 Sep 2003.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Simulation of the VAR Process with calcosoft-2D and its Validation

Reiter, G., Maronnier, V., Sommitsch, C., Gäumann, M., Schützenhöfer, W. & Schneider, R., 2003, LMPC 2003 - Proceedings. ., p. 77-86

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical simulation of the simultaneous precipitation of δ and γ′ phases in the Ni-base superalloy ATI Allvac®718 Plus™

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 1 Dec 2010, 7th International Symposium on Superalloy 718 and Derivatives 2010. p. 569-578 10 p. (7th International Symposium on Superalloy 718 and Derivatives 2010; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Superalloys
Interfacial energy
Kinetics
Precipitates
Computer simulation

Numerical Simulation of the Simultaneous Precipitation of Delta and Gamma Prime Phases in the Ni-Base Superalloy ATI Allvac 718 Plus

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 2010, Superalloy 718 and Derivatives. New Jersey, USA: Wiley, p. 569-578

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical Simulation of the Simultaneous Precipitation of Delta and Gamma Prime Phases in the Ni-Base Superalloy ATI Allvac 718 Plus

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C. & Kozeschnik, E., 9 Oct 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Simulation of the Precipitation Kinetics of Nitrides and Carbides in Microalloyed Steel

Radis, R., Sommitsch, C. (ed.), Reichmann, K. (ed.) & Hofer, F. (ed.), 2010, 1 ed. Graz: Verlag der Technischen Universität Graz. (Monographic series TU Graz : Advanced materials science ; vol. 3)

Research output: Book/ReportBookResearch

Numerical Simulation of the Microstructure Evolution in Friction Stir Spot Welding of AA6082 and Physical Model Validation by Means of Hot Torsion

Krumphals, F., Poletti, M. C., Gao, Z., Enzinger, N. & Sommitsch, C., 2 Nov 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch