Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

2006

Simulation der Temperatur- und Gefügeentwicklung beim Stabwalzen von BSt 550

Sommitsch, C. & Buchmayr, B., 2006, .

Research output: Book/ReportOther reportResearch

Systematische Bestimmung des rekristallisierten Gefügeanteiles einer Nickelbasislegierung in Abhängigkeit vom Verformungsgrad

Mitsche, S., Sommitsch, C. & Pölt, P., 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2007

A Practical Approach to Preform Design for Different Materials

Harrer, O-K., Sommitsch, C., Rüf, G. & Buchmayr, B., 2007, ESAFORM Conference on Material Forming. Melville, NY: American Institute of Physics, Vol. 907. p. 15-20 (AIP Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Beurteilung der effektiven Dehnung bei der mehrstufigen Verformung von komplexen Legierungen

Candic, M., Tian, B. & Sommitsch, C., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Charakterisierung der Ni-Basis-Superlegierung Alloy 718 Plus

Stotter, C., Sommitsch, C. & Buchmayr, B., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Coupled Physical and Numerical Simulation to Optimize Thermo-mechanical Metal Forming Processes

Sommitsch, C. & Buchmayr, B., 2007, In : Steel research international. 78, 10/11, p. 740-744

Research output: Contribution to journalArticleResearchpeer-review

CRACK BEHAVIOUR OF THE NICKEL BASED ALLOY 80A DURING HOT FOMRING

Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007.

Research output: Contribution to conferencePosterResearch

Crack behaviour of the Nickel based alloy 80A during hot forming

Mitsche, S., Pölt, P., Sommitsch, C. & Albu, M., 2007, Modern developments and applications in Microbeam Analysis. ., p. 287-287

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep-fatigue of multi-part container during hot extrusion of copper – Simulation and experimental comparison

Krumphals, F., Wlanis, T., Sommitsch, C. & Redl, C., 14 Jan 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Determination of isothermal flow curves and the dynamic recrystallization kinetic of the nickel-basis superalloy Allvac 718 PlusTM by means of rastegaev specimens

Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 10 Sep 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EBSD - Some experimental and some fundamental problems

Pölt, P., Mitsche, S. & Sommitsch, C., 2007.

Research output: Contribution to conferencePosterResearch

EBSD - Some experimental and some fundamental problems

Pölt, P., Mitsche, S. & Sommitsch, C., 2007, Proc. Electron Backscatter Diffraction 2007. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Entwicklung der Gefügestruktur und Beurteilung der effektiven Dehnung bei der Warmumformung

Candic, M., Tian, B., Kleber, S. & Sommitsch, C., 2007, Verformungskundliches Kolloquium. ., p. 151-157

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Experimentelle Validierung von FEM-Rechnungen zur Spannungs- und Temperaturanalyse von Werkzeugen beim Kupfer-Strangpressen

Krumphals, F., Planitzer, F., Redl, C. & Sommitsch, C., 2007, Verformungskundliches Kolloquium. ., p. 35-41

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

FE-Modelling of the Cross-Rolling-Piercing Process with Discher Discs

Pschera, R., Klarner, J. & Sommitsch, C., 2007, International Conference of Simulation and Modelling of Metallurgical Processes in Steelmaking. ., p. 313-317

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Finite-Elemente-Analyse der Reibungsbedingungen beim Schrägwalzen mit Diescherscheiben

Pschera, R., Klarner, J. & Sommitsch, C., 2007, Seminar "Rohrherstellung und -verarbeitung". ., p. 59-69

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Finite-Elemente-Modellierung des Schrägwalzens

Pschera, R. & Sommitsch, C., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Finite-Elemente-Modellierung des Schrägwalzens

Pschera, R., Klarner, J. & Sommitsch, C., 2007, In : Berg- und hüttenmännische Monatshefte. 152, 7, p. 205-211

Research output: Contribution to journalArticleResearchpeer-review

Gekoppelte physikalische und numerische Simulation zur Optimierung von thermo-mechanischen Umformprozessen

Sommitsch, C. & Buchmayr, B., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung". Kurt Steinhoff, SFB/Transregio 30, Stahlinstitut VDEh, p. 89-99

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hot forming and heat treatment simulation in a steel mill

Redl, C., Tian, B., Wieser, V., Sommitsch, C. & Wlanis, T., 14 Jan 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Hot forming and heat treatment simulation in a steel mill

Redl, C., Tian, B., Wieser, V., Sommitsch, C. & Wlanis, T., 2007, In : Computer methods in materials science = Informatyka w technologii materialów. 7, 1, p. 47-53

Research output: Contribution to journalArticleResearch

Interaction of recrystallization and precipitation during hot forming of alloy 80A

Sommitsch, C., Pölt, P., Rüf, G., Mitsche, S. & Albu, M., 2007, In : Materials Science Forum. 539-543, p. 2988-2993

Research output: Contribution to journalArticleResearchpeer-review

Investigation of Retained Strains during Multipass Deformation

Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007, In : Materials Science Forum. 558/559, p. 485-490

Research output: Contribution to journalArticleResearchpeer-review

Investigation of the influence of homogenization parameters on the mechanical properties of 5083 alloy after hot rolling

Sherstnev, P., Sommitsch, C. & Hacksteiner, M., 10 Sep 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On the retained strain during multipass hot deformation for the austenitic stainless steel 304 L

Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007.

Research output: Contribution to conferencePosterResearch

Optical Surface Analysis of Steel during Hot Compression: A Test to Determine Crack Initiation

Pschera, R., Sommitsch, C. & Winter, G., 2007.

Research output: Contribution to conferencePosterResearch

Recrystallization behaviour of the nickel-based alloy 80A during hot forming

Mitsche, S., Pölt, P. & Sommitsch, C., 2007, In : Journal of microscopy. 3, 227, p. 267-274

Research output: Contribution to journalArticleResearchpeer-review

Recrystallization behaviour of the nickel-based alloy 80 a during hot forming

Mitsche, S., Poelt, P. & Sommitsch, C., 1 Sep 2007, In : Journal of microscopy. 227, 3, p. 267-274 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Nickel
Electrons
Temperature

Untersuchung des Warmwalzens der Al-Legierung 5083

Sherstnev, P. & Sommitsch, C., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2008

Ausscheidungskinetik während der Homogenisierung und Gefügeentwicklung während der Warmumformung der Aluminiumlegierung AA6082

Sherstnev, P., Sommitsch, C., Mitsche, S., Hacksteiner, M. & Ebner, T., 2008, Verformungskundliches Kolloquium. ., p. 123-130

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sherstnev, P., Sommitsch, C., Ebner, T. & Hacksteiner, T., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 579-580 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

Mitsche, S., Sommitsch, C., Ebner, T., Sherstnev, P. & Hacksteiner, M., 2008.

Research output: Contribution to conferencePosterResearch

Characterization of δ-phase in superalloy Allvac 718PlusTM

Stotter, C., Sommitsch, C., Wagner, J., Harald, L., Letofsky-Papst, I., Werner, P., Stockinger, M. & Zickler, G. A., 2008, In : International journal of materials research = Zeitschrift für Metallkunde. 4, 99, p. 376-380

Research output: Contribution to journalArticleResearchpeer-review

Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters

Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A. & Sommitsch, C., 2008, ESAFORM Conference on Material Forming. ., p. 1-4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep and Fatigue Damage in Hot Work Tools Steels during Copper and Aluminium Extrusion

Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Redl, C., 2008, In : Key engineering materials. 367, p. 169-176

Research output: Contribution to journalArticleResearchpeer-review

Creep fatigue in hot work tool steels during copper extrusion

Krumphals, F., Wlanis, T., Sommitsch, C., Buchner, B., Huber, D., Redl, C. & Wieser, V., 2008, International Conference on Low Cycle Fatigue. Berlin: Dt. Verband für Materialforschung und -prüfung, p. 721-726

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

DualBeam FIB application of 3D EDXS for superalloy δ-phase characterization

Wagner, J., Schaffer, M., Schröttner, H., Mitsche, S., Letofsky-Papst, I., Stotter, C. & Sommitsch, C., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 687-688 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

FEM Modelling of Cross Rolling using Damage Mechanics

Pschera, R., Klarner, J. & Sommitsch, C., 2008, Metal forming 2008. Düsseldorf: Verl. Stahleisen, p. 349-356 (Steel research international ; special ed.).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Gekoppelte Umform- und Gefügesimulation beim Radial- und Gesenkschmieden

Harrer, O-K., Sommitsch, C. & Buchmayr, B., 2008, Simulation von Umformprozessen. Inst. für Metallformung, p. 18-27

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of retained strains and microstructures for a hot deformed stainless steel

Candic, M., Tian, B., Kleber, S., Wießner, M., Kamaya, M. & Sommitsch, C., 1 Jan 2008, Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation - Selected, peer reviewed papers from the Int. Conf. on Stress Evaluation Using Neutrons and Synchrotron Radiation Proceedings. Pyzalla, A. R., Degischer, H. P. & Borbely, A. (eds.). Trans Tech Publications Ltd., p. 169-174 6 p. (Materials Science Forum; vol. 571-572).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Stainless Steel
stainless steels
Stainless steel
dwell
microstructure

Investigations of retained deformation energy after hot forming and its influence on the abnormal grain growth of the nickel based alloy 80A

Candic, M., Tian, B., Kleber, S., Mitsche, S. & Sommitsch, C., 2008, TMS Annual Meeting. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Lifetime comparison of different hot work tool steels for extrusion tools in aluminium extrusion

Sommitsch, C., Krumphals, F., Stotter, C., Dendl, D., Wlanis, T., Huber, D. & Redl, C., 2008, International Aluminum Extrusion Technology Seminar. ., p. CD-CD

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Lifetime evaluation of two different hot work tool steels in aluminium extrusion

Sommitsch, C., Sievert, R., Wlanis, T. & Redl, C., 2008, In : Computational materials science. 43, 1, p. 82-91

Research output: Contribution to journalArticleResearchpeer-review

Microstructure modeling of the dynamic recystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718Plus

Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 2008.

Research output: Contribution to conferencePosterResearch

Microstructure modeling of the dynamic recystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718Plus

Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Ebner, T., 2008, Superalloys2008. ., p. 855-861

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mikrostrukturentwicklung und duktile Schädigung beim Gesenkschmieden

Sommitsch, C., Harrer, O-K., Rüf, G. & Buchmayr, B., 2008, Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik. 1 ed. Bad Harzburg: Grips Media, Vol. 2. p. 113-123 (GRIPS' sparkling world of steel).

Research output: Chapter in Book/Report/Conference proceedingChapterResearch