Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

Poster

EBSD-and the recrystallisation of Ni-base alloy

Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004.

Research output: Contribution to conferencePosterResearch

EBSD - Some experimental and some fundamental problems

Pölt, P., Mitsche, S. & Sommitsch, C., 2007.

Research output: Contribution to conferencePosterResearch

Ermittlung von diffusiblem Wasserstoff in hochfestem Schweißgut

Kapl, S., Zwettler, F., Rauch, R., Duchaczek, H., Enzinger, N. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Ermittlung von Materialparameter für Umformverfahren

Hoflehner, C., Sommitsch, C., Eckersdorfer, D. & Hausmann, F., 11 May 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File

Experimentelle Untersuchung und statistische Analyse wesentlicher Prozessparameter beim Stanznieten von 6xxx Aluminiumblechen

Hönsch, F., Domitner, J., Sommitsch, C. & Götzinger, B., 2018.

Research output: Contribution to conferencePosterResearch

Grain-subgrain structure analyses of hot deformed superalloy Allvac 718plusTM by EBSD

Mitsche, S., Sommitsch, C., Huber, D., Pölt, P. & Stockinger, M., 2009.

Research output: Contribution to conferencePosterResearch

Hot Cracking by welding and Casting

Djuric, D., Hadzic, S. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Hot deformation of AA6082 containing fine intermetallic inclusions

Poletti, M. C. & Sommitsch, C., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Hot torsion tests of 100Cr6 steel to simulate the cross-roll piercing process

Fauland, G., Beal, C., Sommitsch, C., Nunner, G. & Winter, G., 26 Sep 2019.

Research output: Contribution to conferencePosterResearch

Impacts on the mechanical properties of aluminum base material due to pin welding

Wittwer, L., Enzinger, N. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File

In Situ Phase Investigations of X20Cr13 High Cr Steel

Mitsche, S., Plesiutschnig, E. & Sommitsch, C., 2016.

Research output: Contribution to conferencePosterResearch

Investigation of Creep Damage in Martensitic 9‐12% Cr Steel Crosswelds using Synchrotron X‐ray Micro‐tomography

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Usegi, K., Suzuki, Y. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Microstructure and Strength Evolution in G-AlSi7Cu0.5Mg According to Different Heat Treatment Parameters

Krumphals, F., Poletti, M. C., Albu, M., STAUDER, B., Radis, R. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Microstructure evaluation of 12% Cr steel using TEM technique

Mendez Martin, F., Albu, M., Sonderegger, B. & Sommitsch, C., 2009.

Research output: Contribution to conferencePosterResearch

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014.

Research output: Contribution to conferencePosterResearch

Microstructure modeling of the dynamic recystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718Plus

Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 2008.

Research output: Contribution to conferencePosterResearch

Mikrostrukturentwicklung beim Friction Stir Processing von Ti-6Al-4V

Ramskogler, C., Krumphals, A. & Sommitsch, C., 2011.

Research output: Contribution to conferencePosterResearch

Modellierung der duktilen Schädigung während der Warmumformung

Rüf, G., Sommitsch, C. & Buchmayr, B., 2006.

Research output: Contribution to conferencePosterResearch

Modelling of Beta Grain Coarsening in Ti-6Al-4V during Isothermal Heat Treatment

Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 2010.

Research output: Contribution to conferencePosterResearch

Modelling of diffusional creep in polycrystals - Poster

Pein, C. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

On Modelling the Microstructure Evolution of a Ferritic Hot-Work Tool Steel during Short-Term Creep

Krumphals, F., Wurmbauer, H., Wieser, V. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

On the retained strain during multipass hot deformation for the austenitic stainless steel 304 L

Candic, M., Tian, B., Kleber, S., Wießner, M. & Sommitsch, C., 2007.

Research output: Contribution to conferencePosterResearch

Optical Surface Analysis of Steel during Hot Compression: A Test to Determine Crack Initiation

Pschera, R., Sommitsch, C. & Winter, G., 2007.

Research output: Contribution to conferencePosterResearch

Physical Simulation of Hot Ductility of Continuous Cast Steels with in-situ solidified Hot Tensile Test

Djuric, D., Sommitsch, C., Zamberger, S. & Stiefler, F., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Quantification of the recrystallized fraction in a nickel-base-alloy from EBSD-data

Mitsche, S., Pölt, P., Sommitsch, C. & Walter, M., 2003.

Research output: Contribution to conferencePosterResearch

Open Access
File

Relation between prior austenite grain size creep rupture life and pore evolution of 9% Cr steels

Plesiutschnig, E., Dikovits, M., Prodinger, D., Sommitsch, C., Wallner, S. & Zeiler, G., 2015.

Research output: Contribution to conferencePosterResearch

Stress Relaxation Measurements of Metadynamic and Static Recrystallisation of Alloy 80A

Kleber, S., Sommitsch, C. & Wiessner, M., 2004.

Research output: Contribution to conferencePosterResearch

Open Access
File

Surface Structuring by Electron Beam Technique in Titanium Alloys for Biomedical Applications

Ramskogler, C., Warchomicka, F., Sommitsch, C., Mostofi, S. & Weinberg, A., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Surface Structuring of Biomaterials by Electron Beam Technique

Stütz, M., Warchomicka, F. G., Ramskogler, C., Poletti, M. C. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Systematic Materials Selection for Warehouse Shuttle Vehicles

Aigner, M., Caliskanoglu, O. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Transmission Electron Microscopy Investigations of a 12 wt.% Martensitic Cr Steel Designed for High Temperature Service

Mendez Martin, F., Albu, M., Sonderegger, B., Mayr, P. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Validierung Computertomografie-Reinheitsgradmessung mittels automatisierter Lichtmikroskopie

Decker, C., Schützenhöfer, W., Plank, B., Plesiutschnig, E. & Sommitsch, C., 10 May 2016.

Research output: Contribution to conferencePosterResearch