Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

Damage analysis of a cracked low-pressure steam turbine blade

Plesiutschnig, E., Vallant, R., Enzinger, N. & Sommitsch, C., 28 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Damage analysis of extrusion tools made from the austenitic hot work tool steel Böhler W750

Krumphals, F., Wlanis, T., Sievert, R., Wieser, V. & Sommitsch, C., 2011, In : Computational materials science. 50, p. 1250-1255

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Damage simulation of extrusion dies of different geometry and material

Wlanis, T., Sommitsch, C., Hatzenbichler, T. & Wieser, V., 25 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Das Kompetenznetzwerk für Fügetechnik JOIN4+

Enzinger, N. & Sommitsch, C., 2013, Graz: Verlag der Technischen Universität Graz. (TU Graz research)

Research output: Book/ReportOther reportResearch

Das österreichische Kompetenznetzwerk für Fügetechnik K-Porjekt JOIN4+

Enzinger, N. & Sommitsch, C., 2012, Tagungsband 8. Chemnitzer Symposium Füge- und Schweißtechnik. Chemnitz: Universitätsverlag Chemnitz, p. 27-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 6 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 2011, Proceedings of teh IWOTE'11: International Workshop on Thermal Forming and Welding Distortion. Bremen: BIAS Verlag, Vol. 41. p. 203-214 (Strahltechnik).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Deformation Behavior of High-Strength Steel Rivets for Self-Piercing Riveting Applications

Hönsch, F., Domitner, J. & Sommitsch, C., 2019, In : AIP Conference Proceedings. 2113, p. 050002-1-6

Research output: Contribution to journalConference articleResearchpeer-review

Open Access

Deformation behaviour of a ferritic hot-work tool steel with respect to the microstructure

Krumphals, F., Reggiani, B., Donati, L., Wlanis, T. & Sommitsch, C., 2012, In : Computational materials science. 52, p. 40-45

Research output: Contribution to journalArticleResearchpeer-review

Design of a roll test bench for investigating thermo-mechanical tool wear

Domitner, J., Stern, T., Leitner, A. T., Aigner, M., Paar, A., Trickl, T., Elizondo, L. & Sommitsch, C., 2019, Proceedings of the TOOLING 2019 Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Determination of isothermal flow curves and the dynamic recrystallization kinetic of the nickel-basis superalloy Allvac 718 PlusTM by means of rastegaev specimens

Stotter, C., Sommitsch, C., Mitsche, S., Pölt, P., Buchmayr, B. & Stockinger, M., 10 Sep 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Determination of parameters for modeling the fracture behavior of aluminum alloy welds in car body structures

Grünbart, F., Silvayeh, Z., Domitner, J., Fellner, B. & Sommitsch, C., 2019, Proceedings of the 72nd IIW Annual Assembly and International Conference. p. 147-1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

DEVELOPMENT OF A HYBRID DEEP DRAWING PROCESS TO REDUCE SPRINGBACK OF AHSS

Boskovic, V., Sommitsch, C. & Kicin, M., Jul 2017.

Research output: Contribution to conferencePaperResearchpeer-review

Development of high creep resistant MARBN steels for forged components in high efficient power plants

Plesiutschnig, E., Zeiler, G., Sommitsch, C. & Beal, C., 2017, Proceedings - 20th International Forgemasters Meeting - IFM 2017. p. 115-123

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Steel
Power plants
Creep
Heat treatment
Recovery

Development of microstructure in forging alloy 718

Harrer, O-K., Sommitsch, C., Wallner, S. & Wieser, V., 2005, International Conference of Simulation and Modelling of Metallurgical Processes in Steelmaking. ., p. 463-471

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Die hoch hinaus wollen

Sommitsch, C., 4 Oct 2006, Wirtschafts-Blatt, p. 10-11.

Research output: Contribution to specialist publicationArticleResearch

Direct observation of the crack tip deformation and the crack closure

Pippan, R., Bichler, C., Sommitsch, C. & Kolednik, O., 1996, Fatigue ´96 – Proceedings of the 6th International Fatigue Congress. Oxford: Pergamon, p. 411-416

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dislocation Density-Based Modeling of Dynamic Recrystallized Microstructure and Process in Friction Stir Spot Welding of AA6082

Gao, Z., Feng, J., Wang, Z., Niu, J. T. & Sommitsch, C., 2019, In : Metals. 9, 6, 672.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 2014, First International Conference on Structural Integrity.. ., p. 225-236

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 12 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 4 Feb 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dissimilar Electron Beam Welding of Nickel Base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 2014, In : Procedia engineering . 86, p. 184-194

Research output: Contribution to journalArticleResearchpeer-review

DualBeam FIB application of 3D EDXS for superalloy δ-phase characterization

Wagner, J., Schaffer, M., Schröttner, H., Mitsche, S., Letofsky-Papst, I., Stotter, C. & Sommitsch, C., 2008, European Microscopy Congress. Berlin: Springer, Vol. Volume1. p. 687-688 (Instrumentation and Methods).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ductile fracture analysis with damage models of effective stresses at high temperatures

Sommitsch, C. & Rüf, G., 2005, International Conference on Technology of Plasticity. ., p. 327-328

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Ductile fracture analysis with damage models of effective stresses at high temperatures

Sommitsch, C. & Rüf, G., 9 Oct 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Duktile Schädigung und Mikrostrukturentwicklung einer Nickelbasislegierung während der Warmumformung – Experiment und Modellierung

Rüf, G., Sommitsch, C. & Buchmayr, B., 27 Jun 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Dynamic recrystallization of Ni-base alloys - Experimental results and comparisons with simulations

Pölt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, In : Materials science and engineering / A. 420, p. 306-314

Research output: Contribution to journalArticleResearchpeer-review

Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

Sommitsch, C., Pölt, P., Mitsche, S. & Walter, M., 2005, Sommerschule Schmiedetechnik. Leoben: Lehrstuhl für Umformtechnik, p. 113-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Dynamische Rekristallisation von Nickelbasis-Legierungen, Bildanalytische Methoden und EBSD

Sommitsch, C., Pölt, P., Mitsche, S. & Walter, M., 13 Jul 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

EBSD Analysis of the recrystallization behaviour of the Nickel based alloy 80A during hot forming

Mitsche, S., Sommitsch, C. & Pölt, P., 2006, In : Practical metallography = Praktische Metallographie. Sonderheft, 38, p. 43-50

Research output: Contribution to journalArticleResearchpeer-review

EBSD-and the recrystallisation of Ni-base alloy

Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004.

Research output: Contribution to conferencePosterResearch

EBSD – and the recrystallisation of Ni-base-alloys

Pölt, P., Mitsche, S., Sommitsch, C. & Walter, M., 2004, Proceedings of the 13th European Microscopy Congress. Liège: Belgian Soc. for Microscopy, p. 695-696

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD - Some experimental and some fundamental problems

Pölt, P., Mitsche, S. & Sommitsch, C., 2007.

Research output: Contribution to conferencePosterResearch

EBSD - Some experimental and some fundamental problems

Pölt, P., Mitsche, S. & Sommitsch, C., 2007, Proc. Electron Backscatter Diffraction 2007. ., p. 1-2

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

EBSD-Untersuchungen des Rekristallisationsverhaltens der Nickelbasislegierung Alloy 80A während der Warmverformung

Mitsche, S., Sommitsch, C. & Pölt, P., 27 Sep 2006.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Effect of Friction Stir Welding on Microstructure and Properties of Micro-TiO_2 doped HSLA Steel

Pouriamanesh, R., Dehghani, K., Hütter, A., Vallant, R., Enzinger, N. & Sommitsch, C., 2016, 41th CWS International conference Welding 2016. Opatija, p. 46-55

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Effect of Manganese on the Structure-Properties Relationship of Cold Rolled AHSS Treated by a Quenching and Partitioning Process

Kaar, S., Krizan, D., Schneider, R., Beal, C. & Sommitsch, C., 19 Oct 2019, In : Metals. 9, 10, 1122.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Steel
Manganese
Martensite
Austenite
Quenching

Effect of Melting on the Hot Ductility of Continuously Cast Steels

Caliskanoglu, O., Zamberger, S., Beal, C. & Sommitsch, C., 2015, The 6th International Congress on the Science and Technology of Steelmaking (ICS2015). Peking: China Machine Press, p. 512-515

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Effect of Pass Number, Rotational and Traverse Speed on Particle Distribution and Microstructure of AZ31/SiC Composite Produced by Friction Stir Processing

Jabbari, A. H., Sedighi, M., Vallant, R., Hütter, A. & Sommitsch, C., 2015, In : Key engineering materials. 651-653, p. 765-770

Research output: Contribution to journalArticleResearchpeer-review

Effect of Process Parameters and High-Temperature Preheating on Residual Stress and Relative Density of Ti6Al4V Processed by Selective Laser Melting

Malý, M., Höller, C., Skalon, M., Meier, B., Koutný, D., Pichler, R., Sommitsch, C. & Paloušek, D., 20 Mar 2019, In : Materials. 12, 6, 13 p., 930.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
Preheating
Residual stresses
Melting
Hatches
Lasers

Effect of the heat treatment on the microstructure and mechanical properties of medium-Mn-steels

Schneider, R., Steineder, K., Krizan, D. & Sommitsch, C., 30 Nov 2018, In : Materials Science and Technology (United Kingdom).

Research output: Contribution to journalArticleResearchpeer-review

Steel
heat treatment
Heat treatment
steels
mechanical properties

Effect of the reuse of powder on material properties of Ti6Al4V processed by SLM

Meier, B., Skalon, M., Warchomicka, F. G., Belei Feliciano, C. A., Görtler, M., Kaindl, R. & Sommitsch, C., Jul 2019, In : AIP Conference Proceedings. 2113, 1, 150006.

Research output: Contribution to journalConference articleResearchpeer-review

reuse
titanium
powders
titanium alloys
tensile strength

Effect of V on the phase amounts and the composition of MC carbides in Indefinite Chill alloys.

Paar, A., Trickl, T., Aigner, M., Schneider, R. & Sommitsch, C., 2019, Proceedings of the 11th International Conference of Tooling, May 12-16 2019. p. paper nr. 26

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

casts
heat treatment
Heat treatment
microstructure
Microstructure

Einfluss des Umwandlungsverhaltens auf das Gefüge und die mechanischen Eigenschaften eines Q&P-Stahls mit 4,5 % Mn

Kaar, S., Schneider, R., Krizan, D., Béal, C. & Sommitsch, C., 1 Apr 2019, HTM - journal of heat treatment and materials, 74, 2, p. 70-84 15 p.

Research output: Contribution to specialist publicationArticleResearchpeer-review

Steel
Austenite
Quenching
Phase transitions
Martensite

Ein Verformungsmodell für das Rohrwalzen in hintereinanderliegenden Dreiwalzenkalibern

Timoshenkov, A., Sommitsch, C. & Klarner, J., 21 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron beam process for the production of model alloys

Sommitsch, C., Wiednig, C. A., Spenger, T., Enzinger, N., Hofer, F. & Simic, S., 2016, Beam Technologies & Laser Application. St. Petersburg: Publishing house SpbSPU, p. 75-81

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Electron Beam Processing for the Production of Model Alloys

Spenger, T., Enzinger, N., Hofer, F., Simic, S., Sommitsch, C. & Wiednig, C. A., 21 Sep 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron Beam Welding of thick walled Copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 3 Nov 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch