Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

Machhammer, M. & Sommitsch, C., 2016, IOP Conf. Series: Materials Science and Engineering 159 (2016) 012001.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Deep drawing
Formability
Heat treatment
Heating
Temperature distribution

The interaction between short-term heat-treatment and the formability of an Al-Mg-Si alloy regarding deep drawing processes

Machhammer, M. & Sommitsch, C., 19 Dec 2016, In : IOP Conference Series / Materials Science and Engineering. 159, 2001, p. 1-8 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Thermo-mechanical Fatigue Behaviour of AlSi7Mg Alloy Processed by Selective Laser Melting

Sajedi, Z., Casati, R., Poletti, M. C., Skalon, M., Sommitsch, C. & Vedani, M., Oct 2019, (Submitted) Euro PM2019 - Congress and Exhibition. European Powder Metallurgy Association

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

File
Melting
Fatigue of materials
High temperature applications
Lasers
Cylinder heads

Thermomechanical Wear Testing of Metal Matrix Composite Cladding for Potential Application in Hot Rolling Mills

Domitner, J., Aigner, M., Stern, T., Paar, A., Sommitsch, C. & Elizondo, L., 20 Nov 2019, In : Steel research international. 10 p., 1900478.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
Hot rolling mills
metal matrix composites
Metals
Wear of materials
Tungsten carbide

Thermo-mechanische Simulation einer Pressstumpfschweißung von 26MnB5

Lemmerer, D., Kicin, M., Spachinger, S., Wagner, J., Enzinger, N. & Sommitsch, C., 2014, In : Berg- und hüttenmännische Monatshefte. 159, 7, p. 298-299

Research output: Contribution to journalArticleResearchpeer-review

Through-process simulation of aluminium casting A356-simulation of solidification and stress analysis during heat treatment

Unterreiter, G., Wlanis, T., Ludwig, A., Wu, M., Sommitsch, C. & Mayer, F., 2011, In : The International journal of multiphysics. Spec. Edit, p. 209-217

Research output: Contribution to journalArticleResearchpeer-review

Transmission Electron Microscopy Investigations of a 12 wt.% Martensitic Cr Steel Designed for High Temperature Service

Mendez Martin, F., Albu, M., Sonderegger, B., Mayr, P. & Sommitsch, C., 2010.

Research output: Contribution to conferencePosterResearch

Type IV cracking in advanced martensitic chromium steel

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Über die Bestimmung des rekristallisierten Anteils bei der Warmumformung

Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 2005, Verformungskundliches Kolloquium. ., p. 113-126

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Über die Bestimmung des rekristallisierten Anteils bei Warmumformung

Sommitsch, C., Walter, M., Kleber, S., Pölt, P. & Mitsche, S., 26 Feb 2005.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

ULTRA-FINE WIRE FABRICATING APPARATUS AND METHOD

Pourbashiri, M., Sedighi, M., Sommitsch, C., Pourbashiri, M., Sedighi, M. & Sommitsch, C., 7 Sep 2017, IPC No. B21C 1/ 04 A I, Patent No. US2017252788, Priority date 2 Mar 2016, Priority No. IR20161394301390

Research output: PatentResearch

Wire
Grain refinement
Mechanical properties
Plastic deformation
Raw materials

Untersuchung der mechanischen Materialeigenschaften in der Wärmeeinflusszone geschweißter EN AW-6063-Bleche

Silvayeh, Z., Götzinger, B., Fellner, B., Hartmann, M. & Sommitsch, C., 2018, Tagungsband der 10. Ranshofener Leichtmetalltage: Hochleistungsmetalle und Prozesse für den Leichtbau der Zukunft. Kraly, A., Chimani, C. & Uggowitzer, P. (eds.). p. 198-209

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Untersuchung des Warmwalzens der Al-Legierung 5083

Sherstnev, P. & Sommitsch, C., 27 Mar 2007.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Untersuchung des zweiten Duktilitätsminimums mikrolegierter Stähle mit einer neu entwickelten Heißzugprüfung

Djuric, D., Caliskanoglu, O., Sommitsch, C., Ilie, S. & Leidinger, D., 2012, In : Berg- und hüttenmännische Monatshefte. 157, 8-9, p. 296-300

Research output: Contribution to journalArticleResearchpeer-review

Validierung Computertomografie-Reinheitsgradmessung mittels automatisierter Lichtmikroskopie

Decker, C., Schützenhöfer, W., Plank, B., Plesiutschnig, E. & Sommitsch, C., 10 May 2016.

Research output: Contribution to conferencePosterResearch

Verarbeitungs- und Gebrauchseigenschaften von Werkstoffen

Sommitsch, C., 1997, In : Schweissen und Schneiden <Düsseldorf, 1949 ->. 8, p. 568-575

Research output: Contribution to journalArticleResearch

Vergleichende Charakterisierung mechanischer Kennwerte von Walzenwerkstoffen

Armin, P., Schneider, R., Han, Trickl, T., Brandner, M., Elizondo, L., Beal, C. & Sommitsch, C., 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Vergleichende Untersuchungen zum neutralen und reduzierenden Lochen an einem Versuchsschrägwalzwerk

Pschera, R., Klarner, J. & Sommitsch, C., 2008, In : Berg- und hüttenmännische Monatshefte. 153, 11, p. 418-422

Research output: Contribution to journalArticleResearchpeer-review

Vorhersage der lokalen Warmrissbildung beim industriellen Stahlguss

Hadžić, S., Hanus, R. & Sommitsch, C., 23 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 2011, Tagungsskript Gefüge und Bruch. ., p. 207-217

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 30 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Werkstoffmodellierung und Prozesssimulation in der Schweißtechnik

Sommitsch, C. & Enzinger, N., 5 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Zelluläre Automaten als Werkzeug zur Abbildung komplexer Systeme – Rekristallisation

Timoshenkov, A., Sommitsch, C. & Klarner, J., 12 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Zerstörende und zerstörungsfreie Prüfung der Kriechschädigung eines 9% Cr Stahles (Projekt "Hot Pipes")

Pein, C. & Sommitsch, C., 2012, Jahrestagung 2012 Zerstörungsfreie Materialprüfung, Kurzfassungen der Vorträge und Posterbeiträge. ., p. 48-48

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Zur Theorie der Gefügeänderungen in Metallen: Verfestigung, Erholung, Korngrenzenbewegung und Rekristallisation

Sommitsch, C., Reichmann, K. (ed.), Hofer, F. (ed.) & Mitter, W., 2010, 1 ed. Graz: Verlag der Technischen Universität Graz. (Monographic Series TU Graz : Advanced material science)

Research output: Book/ReportBookResearch

δ-Phase characterization of superalloy allvac 718 PlusTM

Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS Annual Meeting. ., p. 1-6

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

δ-phase characterization of superalloy Allvac 718 Plus™

Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 26 Sep 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

heat resistant alloys
Superalloys
High temperature properties
gas turbine engines
metallography

„Russian Way“ and Metallurgy

Timoshenkov, A., Sommitsch, C. & Klarner, J., 6 Dec 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch