Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Untersuchung des zweiten Duktilitätsminimums mikrolegierter Stähle mit einer neu entwickelten Heißzugprüfung

Djuric, D., Caliskanoglu, O., Sommitsch, C., Ilie, S. & Leidinger, D., 2012, In : Berg- und hüttenmännische Monatshefte. 157, 8-9, p. 296-300

Research output: Contribution to journalArticleResearchpeer-review

Zelluläre Automaten als Werkzeug zur Abbildung komplexer Systeme – Rekristallisation

Timoshenkov, A., Sommitsch, C. & Klarner, J., 12 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Zerstörende und zerstörungsfreie Prüfung der Kriechschädigung eines 9% Cr Stahles (Projekt "Hot Pipes")

Pein, C. & Sommitsch, C., 2012, Jahrestagung 2012 Zerstörungsfreie Materialprüfung, Kurzfassungen der Vorträge und Posterbeiträge. ., p. 48-48

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

„Russian Way“ and Metallurgy

Timoshenkov, A., Sommitsch, C. & Klarner, J., 6 Dec 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2011

ADVANCED CREEP RESISTANT MARTENSITIC STEELS

Sommitsch, C., Mayr, P., Schlacher, C., Kobayashi, M. & Toda, H., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Analysis of material flow and stresses in a rolling mill for seamless tubes

Timoshenkov, A., Sommitsch, C. & Klarner, J., 30 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Assessment of dynamic softening mechanisms in Allvac® 718PlusTM by EBSD analysis

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2011, In : Materials science and engineering / A. 528, p. 3754-3760

Research output: Contribution to journalArticleResearchpeer-review

Assessment of dynamic softening mechanisms in Allvac® 718Plus™ by EBSD analysis

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 25 Apr 2011, In : Materials Science and Engineering A. 528, 10-11, p. 3754-3760 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Comparison between microstructure evolution in IN718 and ATI Allvac® 718PlusTM - Simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 2011, In : Advanced Materials Research. 278, p. 168-173

Research output: Contribution to journalArticleResearchpeer-review

Damage analysis of extrusion tools made from the austenitic hot work tool steel Böhler W750

Krumphals, F., Wlanis, T., Sievert, R., Wieser, V. & Sommitsch, C., 2011, In : Computational materials science. 50, p. 1250-1255

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 2011, Proceedings of teh IWOTE'11: International Workshop on Thermal Forming and Welding Distortion. Bremen: BIAS Verlag, Vol. 41. p. 203-214 (Strahltechnik).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Deformation and distortion induced by pneumatic impact treatment (PIT) in a welded joint for HS steel

Rahman, M. M., Enzinger, N. & Sommitsch, C., 6 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ein Verformungsmodell für das Rohrwalzen in hintereinanderliegenden Dreiwalzenkalibern

Timoshenkov, A., Sommitsch, C. & Klarner, J., 21 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Sommitsch, C. & Warchomicka, F., 18 Jun 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Experience with creep tested 9Cr3W3CoVNbBN welded joints

Mayr, P., Schlacher, C., Mitsche, S. & Sommitsch, C., 11 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction Stir Welding of dissimilar material combinations

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 6 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Friction stir welding of magnesium and steel in car body engineering

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 2011, Joining in Car Body Engineering 2011. ., p. 113-128

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Friction stir welding of magnesium and steel in car body engineering

Figner, G., Weinberger, T., Schneider, C., Sommitsch, C., Enzinger, N. & Cerjak, H-H., 12 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Hot deformation of AA6082 containing fine intermetallic inclusions

Poletti, M. C. & Sommitsch, C., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Impact of Mg, Cu and Si distribution on the microhardness of Al dendrites after casting, homogenization and continuous cooling of G-AlSi7MgCu0.5

Krumphals, F., Mittermayr, F., Gumpl Philipp, N. V., Stauder, B., Sommitsch, C. & Radis, R., 4 Oct 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Influence of temperature and strain rate on the softening processes in Allvac 718Plus

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Innovative Fügetechniken am Beispiel des Rührreibschweißens

Sommitsch, C. & Enzinger, N., 6 Oct 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Loss of ductility caused by AlN precipitates in Hadfield steel

Radis, R., Schlacher, C., Mayr, P., Enzinger, N., Kozeschnik, E. & Sommitsch, C., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Microstructure development in hot deformed AA6082

Poletti, M. C., Rodriguez-Hortalá, M., Hauser, M. & Sommitsch, C., 2011, In : Materials science and engineering / A. 528, p. 2423-2430

Research output: Contribution to journalArticleResearchpeer-review

Mikrostrukturentwicklung beim Friction Stir Processing von Ti-6Al-4V

Ramskogler, C., Krumphals, A. & Sommitsch, C., 2011.

Research output: Contribution to conferencePosterResearch

Mikrostrukturmodellierung in Ti-6Al-4V während der thermo-mechanischen Behandlung

Krumphals, A. & Sommitsch, C., 4 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of beta grain size during beta phase processing of Ti-6Al-4V

Krumphals, A., Sommitsch, C. & Stockinger, M., 17 Nov 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 1 Aug 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modellierung von Ausscheidungs – Abständen in komplexen Systemen

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 13 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 2011, Erfahrungsausstausch Reibschweißen. ., p. 1-17

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Numerische Simulation von reibungsbasierten Fügeprozessen

Enzinger, N. & Sommitsch, C., 1 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

On the Theory of Microstructure Changes in Metals: Hardening, Recovery, Grain Boundary Motion, and Recrystallization

Mitter, W. & Sommitsch, C., 2011, 1 ed. Graz: Verlag der Technischen Universität Graz. (Advanced Materials Science)

Research output: Book/ReportBookResearch

Particle distance distributions and their effect on precipitate strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 2 May 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Particle Distance Distributions and Their Effect on Precipitate Strengthening

Sonderegger, B., Holzer, I., Kozeschnik, E. & Sommitsch, C., 17 Jan 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physical Simulation of Hot Ductility of Continuous Cast Steels with in-situ solidified Hot Tensile Test

Djuric, D., Sommitsch, C., Zamberger, S. & Stiefler, F., 2011.

Research output: Contribution to conferencePosterResearch

Open Access
File

Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten

Krumphals, A., Stockinger, M. & Sommitsch, C., 2011, XXX. Verformungskundliches Kolloquium. ., p. 31-36

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Simulation der Gefügeentwicklung während der Verarbeitung von Ti-6Al-4V im Zweiphasengebiet unter Verwendung von zellulären Automaten

Krumphals, A., Sommitsch, C. & Stockinger, M., 26 Feb 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Study of the transformation kinetics during hot rolling

Timoshenkov, A., Sommitsch, C. & Klarner, J., 6 Dec 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Through-process simulation of aluminium casting A356-simulation of solidification and stress analysis during heat treatment

Unterreiter, G., Wlanis, T., Ludwig, A., Wu, M., Sommitsch, C. & Mayer, F., 2011, In : The International journal of multiphysics. Spec. Edit, p. 209-217

Research output: Contribution to journalArticleResearchpeer-review

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 2011, Tagungsskript Gefüge und Bruch. ., p. 207-217

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Wasserstoffinduzierte Kaltrissbildung bei hochfesten Stählen

Sommitsch, C. & Enzinger, N., 30 Mar 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Werkstoffmodellierung und Prozesssimulation in der Schweißtechnik

Sommitsch, C. & Enzinger, N., 5 Apr 2011.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 2010, Proceedings EuroSuperalloys 2010 - European Symposium on Superalloys and their Application. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Comparison between microstructure evolution in IN718 and ATI AllvacR 718PlusTM - simulation and trial forgings

Huber, D., Sommitsch, C. & Stockinger, M., 25 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of cellular automata and phase field methods for mdelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 31 May 2010.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Comparison of cellular automata and phase field methods for modelling of annealing

Singh, B., Candic, M., Sommitsch, C. & Tian, B., 2010, MMM2010. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep strength and microstructural evolution of 9-12% Cr hear resistant steels during creep exposure at 600°C and 650°C

Mendez Martin, F., Panait, C. G., Bendick, W., Albu, M., Sonderegger, B., Sommitsch, C., Gourgues-Lorenzon, A-F., Besson, J. & Fuchsmann, A., 2010.

Research output: Contribution to conferencePosterResearch