Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

2013

Study of creep cavitation behavior in tempered martensitic steel using synchrotron micro-tomography and serial sectioning techniques

Gupta, C., Toda, H., Schlacher, C., Adachi, Y., Mayr, P., Sommitsch, C., Usegi, K., Suzuki, Y., Takeuchi, A. & Kobayashi, M., 2013, In : Materials science and engineering / A. A564, p. 525-538

Research output: Contribution to journalArticleResearchpeer-review

Study of Creep damage in a 10.86% Cr Heat Resistant Steel using Synchrotron X-ray Microtomography

Gupta, C., Toda, H., Schlacher, C., Mayr, P., Sommitsch, C., Uesugi, K., Suzuki, Y., Takeuchi, A. & Kobayashi, M., 2013, In : Advanced Materials Research. 794, p. 476-483

Research output: Contribution to journalArticleResearchpeer-review

2012

Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse

Timoshenkov, A., Sommitsch, C. & Klarner, J., 2012, (Accepted/In press) Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse. Tscheljabinsk: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Aktuelle Tendenzen in der industriell bezogenen Modellierung der Warmumformprozesse

Timoshenkov, A., Sommitsch, C. & Klarner, J., 24 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Analysis of creep cavitation in advanced 9-12%Cr steels using 3-D characterization

Gupta, C., Toda, H., Hoshino, H., Yamauchi, S., Kobayashi, M., Schlacher, C., Sommitsch, C., Mayr, P., Adachi, A., Usegi, K., Suzuki, Y. & Takeuchi, A., 2012, 12th International Conference on Creep and Fracture of Engineering Materials and Structures. ., p. C17-C18

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analysis of low-stress creep testing data and its implication on the life-time prediction for 9-12% Cr steels

Mayr, P., Schlacher, C., Mendez Martin, F., Radis, R. & Sommitsch, C., 2012, 12th International Conference on Creep and Fracture of Engineering Materials and Structures. ., Vol. 12. p. C24-C25 (Creep and Fracture of Engineering Materials and Structures).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analysis of plastic flow during friction stir spot welding using finite element modelling

Gao, Z., Krumphals, F., Sherstnev, P., Enzinger, N., Niu, J. T. & Sommitsch, C., 2012, In : Key engineering materials. 504-506, p. 419-424

Research output: Contribution to journalArticleResearchpeer-review

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 2012, Proceedings 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 344-351

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 28 Aug 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

A simple FE approach to study microstructural influences in power-law creep

Pein, C. & Sommitsch, C., 2012, In : Computational materials science. 52, p. 73-76

Research output: Contribution to journalArticleResearchpeer-review

CORROSION AND MECHANICAL PROPERTIES OF WELDED ALUMINIUM AND MAGNESIUM ALLOYS FOR REFRIGERATION COMPRESSORS IN COMPARISON WITH DEEP-DRAWING STEEL

Kerschbaumer, K. G., Vallant, R., Enzinger, N. & Sommitsch, C., 2012, 20th JUBILEE CONFERENCE ON MATERIALS AND TECHNOLOGY. ., p. 129-129

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Uesugi, K., Suzuki, Y. & Sommitsch, C., 4 Jun 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Das österreichische Kompetenznetzwerk für Fügetechnik K-Porjekt JOIN4+

Enzinger, N. & Sommitsch, C., 2012, Tagungsband 8. Chemnitzer Symposium Füge- und Schweißtechnik. Chemnitz: Universitätsverlag Chemnitz, p. 27-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Deformation behaviour of a ferritic hot-work tool steel with respect to the microstructure

Krumphals, F., Reggiani, B., Donati, L., Wlanis, T. & Sommitsch, C., 2012, In : Computational materials science. 52, p. 40-45

Research output: Contribution to journalArticleResearchpeer-review

Elektronenstrahlschweißen - Schlüsseltechnologie für High-End Anwendungen

Tändl, J., Beal, C., Enzinger, N. & Sommitsch, C., 2012, Internationaler Fachkongress der Schweiß- und Verbindungstechnik JOIN-EX. ., p. ---

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Elektronenstrahlschweißen - Schlüsseltechnologie für High-End Anwendungen

Tändl, J., Beal, C., Enzinger, N. & Sommitsch, C., 11 Oct 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of beta grain size during beta phase processing of Ti-6A1-4V

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 1 Dec 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 1. p. 493-496 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure
Processing
Aircraft
Forging
Cost reduction

Evolution of Beta Grain Size During Beta Phase Processing of Ti-6Al-4V

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Proceedings of the 12th World Conference on Titanium. Beijing: Science Press, Vol. Volume I. p. 493-496

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Enzinger, N. & Sommitsch, C., 20 Feb 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Mitsche, S., Enzinger, N. & Sommitsch, C., 8 Jul 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Grain growth during annealing: experiments and modelling

Candic, M., Tian, B. & Sommitsch, C., 2012, In : Materials Science Forum. 715-716, p. 611-616

Research output: Contribution to journalArticleResearchpeer-review

Impacts on the mechanical properties of aluminum base material due to pin welding

Wittwer, L., Enzinger, N. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Open Access
File

Influence of microstructural inhomogenities on internal stress and strain distributions during creep

Pein, C., Sonderegger, B. & Sommitsch, C., 2012, In : Advanced Materials Research. 409, p. 411-416

Research output: Contribution to journalArticleResearchpeer-review

Influence of temperature and strain rate on dynamic softening processes in AllvacR 718PlusTM

Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Pölt, P., 2012, In : Materials Science Forum. 706-709, p. 2440-2445

Research output: Contribution to journalArticleResearchpeer-review

Innovative Prozesse am IWS für fügetechnische Herausforderungen

Enzinger, N. & Sommitsch, C., 8 Nov 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

In-situ-Aufschmelz-Methode zur Bestimmung der Hochtemperatureigenschaften von Stählen

Djuric, D., Höller, C., Oberroither, M., Sonderegger, B. & Sommitsch, C., 2012, In : MP Materials Testing. 54, 2, p. 75-79

Research output: Contribution to journalArticleResearchpeer-review

Investigation of Creep Damage in Martensitic 9‐12% Cr Steel Crosswelds using Synchrotron X‐ray Micro‐tomography

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Usegi, K., Suzuki, Y. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Investigation of Micro-Crack propagation tn the Nickel based alloy 80A during hot forming by 3D-EBSD

Mitsche, S., Jantscher, K., Sommitsch, C. & Pölt, P., 2012, Electron Probe Microanalysis of Materials Today. ., p. 358-358

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

JMatPro und seine Anwendung für die Vorhersage des Umwandlungsverhaltens von Stählen

Timoshenkov, A., Sommitsch, C. & Klarner, J., 21 Mar 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Loss of Ductility Caused by AlN Precipitation in Hadfield Steel

Radis, R., Schlacher, C., Kozeschnik, E., Mayr, P., Enzinger, N., Schröttner, H. & Sommitsch, C., 2012, In : Metallurgical and materials transactions / A. 43, 4, p. 1132-1139

Research output: Contribution to journalArticleResearchpeer-review

Microstructure and Strength Evolution in G-AlSi7Cu0.5Mg According to Different Heat Treatment Parameters

Krumphals, F., Poletti, M. C., Albu, M., STAUDER, B., Radis, R. & Sommitsch, C., 2012.

Research output: Contribution to conferencePosterResearch

Microstructure and Strength Evolution in G-AlSi7Cu0.5Mg According to Different Heat Treatment Parameters

Krumphals, F., Poletti, M. C., Albu, M., STAUDER, B., Radis, R. & Sommitsch, C., 2012, MMM 2012 -6th International Conference on Multiscale Materials Modeling. ., p. 5-5

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure control in processing nickel, titanium and other special alloys

Sommitsch, C., Radis, R., Krumphals, A., Stockinger, M. & Huber, D., 2012, Microstructure evolution in metal forming processes. Cambrdige, UK: Woodhead Publishing Limited, p. 337-383

Research output: Chapter in Book/Report/Conference proceedingChapterResearch

Mikrostrukturmodellierung von Ti-6Al-4V während der thermomechanischen Behandlung mittels zellularem Automaten

Krumphals, A. & Sommitsch, C., 4 May 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of grain growth in one and two phase materials by 2D cellular automata

Sommitsch, C., Krumphals, A., Candic, M., Tian, B. & Stockinger, M., 1 Sep 2012, In : Journal of Computational and Theoretical Nanoscience. 9, 9, p. 1515-1524 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Grain Growth
cellular automata
Cellular automata
Grain growth
Cellular Automata

Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata

Krumphals, A., Stockinger, M. & Sommitsch, C., 10 Sep 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata

Krumphals, A., Sommitsch, C. & Stockinger, M., 2012, (Accepted/In press) 6th European Congress on Computational Methods in Applied Sciences and Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling of two-phase grain structure in Ti-6Al-4V by using cellular automata

Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 15 Oct 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems

Sonderegger, B., Kozeschnik, E. & Sommitsch, C., 2012, In : Materials Science Forum. 706-709, p. 1521-1526

Research output: Contribution to journalArticleResearchpeer-review

Modellierung der Kinetik von Korn- und Phasengrenzen im Zweiphasengebiet von Ti-6Al-4V zur Vorhersage der Kornvergröberung mittels zellularem Automaten

Krumphals, A., Sommitsch, C., Stockinger, M. & Warchomicka, F., 16 Apr 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of recrystallization nucleation at hard inclusions

Mitter, W. & Sommitsch, C., 2012, In : Materials Science Forum. 715-716, p. 593-598

Research output: Contribution to journalArticleResearchpeer-review

Numerical and experimental investigation of laser assisted side milling of Ti6A14v alloy

Zamani, H., Hermani, J. P., Sonderegger, B. & Sommitsch, C., 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 2. p. 1526-1533 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Milling (machining)
Lasers
Laser beams
Wear of materials
Constitutive models

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF LASER ASSISTED SIDE MILLING OF Ti6Al4V ALLOY

Zamani, H., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2012, The Materials Science & Technology 2012 Conference and Exhibition proceedings. Pittsburgh Pennsylvania: Materials Science and Technology (MS&T) 2012, p. 1526-1533

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Numerical Simulation of the Microstructure Evolution in Friction Stir Spot Welding of AA6082 and Physical Model Validation by Means of Hot Torsion

Krumphals, F., Poletti, M. C., Gao, Z., Enzinger, N. & Sommitsch, C., 2 Nov 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Prediction of Hot Tearing in Permanent Mold Steel Casting Using a viscoplastic Model with Damage

Hadzic, S. & Sommitsch, C., 2012, Materials Science & Technology Conference and Exhibition. Pittsburgh Pennsylvania: ., p. 86-86

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Prediction of precipitation kinetics during homogenisation and microstructure evolution during and after hot rolling of AA5083

Sherstnev, P., Melzer, C. & Sommitsch, C., 2012, In : International journal of mechanical sciences. 54, 1, p. 12-19

Research output: Contribution to journalArticleResearchpeer-review

Simulation der Produktion von Nahtlosrohren entlang der Prozesskette

Timoshenkov, A., Sommitsch, C. & Klarner, J., 4 May 2012.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File