Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2020

2014

Influence of Deformation on Phase Transformation and Precipitation of Steels for Oil Country Tubular Goods

Timoshenkov, A., Warczok, P., Albu, M., Jürgen, K., Ernst, K., Gruber, G. & Sommitsch, C., 2014, In : Steel research international. 85, 6, p. 954-967

Research output: Contribution to journalArticleResearchpeer-review

Investigation of pre-existing pores in creep loaded 9Cr steel

Yadav, S. D., Rosc, J., Sartory, B., Brunner, R., Sonderegger, B., Sommitsch, C. & Poletti, M. C., 2014, 3DMS 2014 - Proceedings of the 2nd International Congress on 3D Materials Science. Hoboken, NJ, USA: John Wiley & Sons, Inc, p. 85-90 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Steel
Creep
Cavitation
Tomography
Agglomeration

Investigation of the Al3(Sc,Zr) precipitation behavior of a novel AlMgScZr alloy

Tändl, J., Palm, F., Anders, K., Poletti, M. C. & Sommitsch, C., 25 Apr 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Investigations into the delayed fracture susceptibility of 34CrNiMo6 steel, and the opportunities for its application in ultra-high-strength bolts and fasteners

Kuduzovic, A., Poletti, M. C., Sommitsch, C., Domankova, M., Mitsche, S. & Kienreich, R., 2014, In : Materials science and engineering / A. 590, p. 66-73

Research output: Contribution to journalArticleResearchpeer-review

Microstructural evolution in 0.1%C5%Mn steel after intercritical annealing depending on temperature and cooling rate

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2014, Proceedings of the European Conference on Heat Treatment and 21st IFHTSE Congress. ., p. 301-308

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructural evolution of two low carbon steels with a medium manganese content

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2014, Proceedings of 2nd HMnS Conference. ., p. 351-354

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure evolution and Precipitation modeling in Ni-based alloy C-263

Vujic, S., Beal, C., Di Martino, F., Hogg, S., Matera, S., Tassa, O., Zurek, J. & Sommitsch, C., 2014, In : Materials Science Forum. p. 2219-2224

Research output: Contribution to journalArticleResearchpeer-review

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014, Materials for Advanced Power Engineering 2014. Jülich: ., Vol. 234. p. 180-187 (Energie & Umwelt / Energy & Environment).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Microstructure for an optimized creep rupture strength of high Cr steels

Plesiutschnig, E., Sommitsch, C., Beal, C., Mitsche, S., Paul, S. & Zeiler, G., 2014.

Research output: Contribution to conferencePosterResearch

Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F. G., Stockinger, M. & Sommitsch, C., 2014, In : International journal for multiscale computational engineering. 12, 1, p. 23-31

Research output: Contribution to journalArticleResearchpeer-review

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Stojan, V., Coline, B., Christof, S., Farooq, M., Rolf, S. & Joanna, Z., 1 Jan 2014, p. 1163-1172. 10 p.

Research output: Contribution to conferencePaperResearchpeer-review

Austenitic steel
Precipitates
Creep
Optical microscopy
Aging of materials

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 2014, (Accepted/In press) Electric Power Research Institute (EPRI). .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

Halici, D., Prodinger, D., Poletti, M. C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Advanced Materials Research. Trans Tech Publications Ltd., Vol. 783-786. p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

hot working
Hot working
titanium alloys
Titanium alloys
damage

Modelling the dynamic recrystallization in C–Mn micro-alloyed steel during thermo-mechanical treatment using cellular automata

Timoshenkov, A., Warczok, P., Albu, M., Klarner, J., Kozeschnik, E., Bureau, R. & Sommitsch, C., 2014, In : Computational materials science. p. 85-94

Research output: Contribution to journalArticleResearchpeer-review

Optimized microstructure for an increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G. & Sommitsch, C., 11 Sep 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physical based creep strain modelling of 9%Cr martensitic steel

Yadav, S. D., Schuler, M., Sommitsch, C. & Poletti, M. C., 2014, (Accepted/In press) ECCC International Conference on Creep and Fracture in High Temperature Components: Design & Life Assessment Issues. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Rührreibschweißen von Leichtmetallen und MMCs

Sommitsch, C., Hütter, A., Pakkanen, J., Poletti, M. C., Tändl, J., Krpic, B., Ramskogler, C. & Enzinger, N., 2014, Leichtmetalle - Prozesse - Anwendungen: Zukunftstechnologie als Basis für neue Mobilitätskonzepte. ., p. 164-178

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Rührreibschweißen von Leichtmetallen und MMCs

Sommitsch, C., Hütter, A., Pakkanen, J., Poletti, M. C., Tändl, J., Krpic, B., Ramskogler, C. & Enzinger, N., 6 Nov 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Studies on ductile damage and flow instabilities during hot deformation of a multiphase γ-TiAl alloy

Halici, D., Zamani, H. A., Prodinger, D., Poletti, M. C., Sommitsch, C., Huber, D. & Stockinger, M., 2014, In : Key engineering materials. 611-612, p. 99-105

Research output: Contribution to journalArticleResearchpeer-review

Studies on ductile damage and flow instabilities during hot deformation of a multiphase γ-TiAl alloy

Halici, D., Zamani, H. A., Poletti, M. C., Sommitsch, C., Stockinger, M. & Huber, D., 7 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

STUDY OF CREEP DAMAGE IN CREEP EXPOSED MARTENSITIC HIGH CHROMIUM STEEL WELDMENTS

Schlacher, C., Beal, C., Sommitsch, C., Toda, H. & Mayr, P., 2014, International Conference on Advances in Materials Technology for Fossil Power Plants. ., p. 914-922

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Surface Structuring by Electron Beam Technique in Titanium Alloys for Biomedical Applications

Ramskogler, C., Warchomicka, F., Sommitsch, C., Mostofi, S. & Weinberg, A., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Surface Structuring of Biomaterials by Electron Beam Technique

Stütz, M., Warchomicka, F. G., Ramskogler, C., Poletti, M. C. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Systematic Materials Selection for Warehouse Shuttle Vehicles

Aigner, M., Caliskanoglu, O. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Thermo-mechanische Simulation einer Pressstumpfschweißung von 26MnB5

Lemmerer, D., Kicin, M., Spachinger, S., Wagner, J., Enzinger, N. & Sommitsch, C., 2014, In : Berg- und hüttenmännische Monatshefte. 159, 7, p. 298-299

Research output: Contribution to journalArticleResearchpeer-review

Type IV cracking in advanced martensitic chromium steel

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2013

3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy using Modified Johnson-Cook Material Model

Zamani, H. A., Hermani, J-P., Sonderegger, B. & Sommitsch, C., 2013, In : Key engineering materials. 554-557, p. 2054-2061

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Advanced microstructures for increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Sommitsch, C., Mitsche, S., Paul, S. & Zeiler, G., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

An approximate model to predict near-surface ratcheting of rails under high traction coefficients

Trummer, G., Six, K., Marte, C., Dietmaier, P. & Sommitsch, C., 2013, In : Wear. 314, p. 28-35

Research output: Contribution to journalArticleResearchpeer-review

Corrigendum to "Microstructure development in hot deformed AA6082" [Mater. Sci. Eng. A 528 (2011) 2423-2430]

Poletti, M. C., Rodriguez-Hortalá, M., Hauser, M. & Sommitsch, C., 1 Mar 2013, In : Materials science and engineering / A. 564, p. 288 1 p.

Research output: Contribution to journalArticleResearchpeer-review

Creep and damage investigation of improved 9%Cr steel welded joints

Schlacher, C., Mayr, P., Gupta, C., Toda, H., Usegi, K., Suzuki, Y. & Sommitsch, C., 2013, 9th International Conference on Trends in Welding Research. ., p. 376-381

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Das Kompetenznetzwerk für Fügetechnik JOIN4+

Enzinger, N. & Sommitsch, C., 2013, Graz: Verlag der Technischen Universität Graz. (TU Graz research)

Research output: Book/ReportOther reportResearch

Dissimilar Electron Beam Welding of Nickel base Alloy 625 and 9% Cr Steel

Wiednig, C. A., Lochbichler, C., Enzinger, N., Beal, C. & Sommitsch, C., 12 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

FE modelling of microstructure evolution during friction stir spot welding in AA6082-T6

Gao, Z., Niu, J. T., Krumphals, F., Enzinger, N., Mitsche, S. & Sommitsch, C., 2013, In : Welding in the world. 57, 6, p. 895-902

Research output: Contribution to journalArticleResearchpeer-review

Hot Deformation of AA6082 Containing Fine Intermetallic Particles

Poletti, M. C., Wójcik, T. & Sommitsch, C., 2013, In : Metallurgical and materials transactions / A. 44, p. 1577-1586

Research output: Contribution to journalArticleResearchpeer-review

Influence of deformation on phase transformation and precipitation

Kozeschnik, E., Timoshenkov, A., Piotr, W., Albu, M., Klarner, J., Gruber, G. & Sommitsch, C., 8 Sep 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Innovative Schweißlösungen für moderne Werkstoffe

Tändl, J., Enzinger, N. & Sommitsch, C., 15 Nov 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Intelligente Oberflächen für Implantate

Leithner, A., Warchomicka, F. G., Martinelli, E., Sommitsch, C. & Weinberg, A. M., 4 Jul 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Mathematical Modelling of Weld Phenomena 10

Sommitsch, C. (ed.) & Enzinger, N. (ed.), 2013, 1 ed. .

Research output: Book/ReportBookResearch

Microstructure evolution and Precipitation modeling in Ni-based alloy C-263

Vujic, S., Beal, C., Sommitsch, C., Di Martino, F., Hogg, S., Matera, S., Tassa, O. & Zurek, J., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2013, In : Materials Science Forum. 753, p. 353-356

Research output: Contribution to journalArticleResearchpeer-review

Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

Krumphals, A., Poletti, M. C., Warchomicka, F. G., Stockinger, M. & Sommitsch, C., 5 May 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling and optimizing precipitation in creep resistant austenitic steel 25Cr-20Ni-Nb-N

Vujic, S., Beal, C., Sommitsch, C., Farooq, M., Sandström, R. & Zurek, J., 22 Oct 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

Halici, D., Prodinger, D., Poletti, M. C., Huber, D., Stockinger, M. & Sommitsch, C., 2 Dec 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Physical and Numerical Simulations of the Microstructure Evolution in AA6082 During Friction Stir Processing by Means of Hot Torsion and FEM

Krumphals, F., Gao, Z., Zamani, H., Mitsche, S., Enzinger, N. & Sommitsch, C., 2013, In : Materials Science Forum. 762, p. 590-595

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Physical Simulation of the Hot Ductility of In-situ Solidified Steels

Caliskanoglu, O., Ilie, S., Beal, C. & Sommitsch, C., 16 Jun 2013.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Research in Joining Technologies in Austria

Enzinger, N. & Sommitsch, C., 2013, In : The Paton welding journal. 10-11, p. 92-95

Research output: Contribution to journalArticleResearch

RULE-BASED EXPERT SYSTEM APPLICATION TO OPTIMIZING OF MULTISCALE MODEL OF HOT FORGING AND HEAT TREATMENT OF TI-6AL-4V

Maciol, P., Krumphals, A., Jędrusik, S., Macioł, A. & Sommitsch, C., 2013, V Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED 2013). ., p. 1237-1248

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Schweißgerät der Superlative

Sommitsch, C., Enzinger, N., Beal, C. & Tändl, J., 17 Jan 2013, Kleine Zeitung / Stadtausgabe, p. 26-27.

Research output: Contribution to specialist publicationArticleResearch