Christof Sommitsch

Univ.-Prof. Dipl.-Ing. Dr.techn.

1994 …2023
If you made any changes in Pure these will be visible here soon.

Research Output 1994 2019

2014

Studies on ductile damage and flow instabilities during hot deformation of a multiphase γ-TiAl alloy

Halici, D., Zamani, H. A., Poletti, M. C., Sommitsch, C., Stockinger, M. & Huber, D., 7 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Studies on ductile damage and flow instabilities during hot deformation of a multiphase γ-TiAl alloy

Halici, D., Zamani, H. A., Prodinger, D., Poletti, M. C., Sommitsch, C., Huber, D. & Stockinger, M., 2014, In : Key engineering materials. 611-612, p. 99-105

Research output: Contribution to journalArticleResearchpeer-review

STUDY OF CREEP DAMAGE IN CREEP EXPOSED MARTENSITIC HIGH CHROMIUM STEEL WELDMENTS

Schlacher, C., Beal, C., Sommitsch, C., Toda, H. & Mayr, P., 2014, International Conference on Advances in Materials Technology for Fossil Power Plants. ., p. 914-922

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Surface Structuring by Electron Beam Technique in Titanium Alloys for Biomedical Applications

Ramskogler, C., Warchomicka, F., Sommitsch, C., Mostofi, S. & Weinberg, A., 2014.

Research output: Contribution to conferencePosterResearch

Open Access
File

Surface Structuring of Biomaterials by Electron Beam Technique

Stütz, M., Warchomicka, F. G., Ramskogler, C., Poletti, M. C. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Systematic Materials Selection for Warehouse Shuttle Vehicles

Aigner, M., Caliskanoglu, O. & Sommitsch, C., 2014.

Research output: Contribution to conferencePosterResearch

Thermo-mechanische Simulation einer Pressstumpfschweißung von 26MnB5

Lemmerer, D., Kicin, M., Spachinger, S., Wagner, J., Enzinger, N. & Sommitsch, C., 2014, In : Berg- und hüttenmännische Monatshefte. 159, 7, p. 298-299

Research output: Contribution to journalArticleResearchpeer-review

Type IV cracking in advanced martensitic chromium steel

Schlacher, C., Beal, C., Sommitsch, C. & Mayr, P., 5 May 2014.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2015

3D creep cavitation characteristics and residual life assessment in high temperature steels: a critical review

Gupta, C., Toda, H., Mayr, P. & Sommitsch, C., 2015, In : Materials science and technology. 31, 5, p. 603-626

Research output: Contribution to journalArticleResearchpeer-review

Agile multiscale modelling of the thermo-mechanical processing of an aluminium alloy

MACIOŁ, P., Bureau, R., Poletti, M. C., Sommitsch, C., WARCZOK, P. & Kozeschnik, E., 2015, In : Key engineering materials. 651-653, p. 1319-1324

Research output: Contribution to journalArticleResearchpeer-review

Cavitation studies in materials: New insights from modern techniques in 2D/3D/4D characterisation

Gupta, C., Toda, H., Mayr, P. & Sommitsch, C., 1 Mar 2015, In : Materials Science and Technology (United Kingdom). 31, 5, p. 513-515 3 p.

Research output: Contribution to journalEditorialResearchpeer-review

Characterisation and quantification of cavities in 9Cr martensitic steel for power plants

Yadav, S. D., Sonderegger, B., Sartory, B., Sommitsch, C. & Poletti, M. C., 2015, In : Materials science and technology. 31, 5, p. 554-564

Research output: Contribution to journalArticleResearchpeer-review

Comparative Investigation of Phase Transformation Behavior as a Function of Annealing Temperature and Cooling Rate of Two Medium-Mn Steels

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2015, In : Steel research international. 85, p. 1-8

Research output: Contribution to journalArticleResearchpeer-review

CORROSION RESISTANCE OF LINEAR FRICTION WELDED CHAIN LINKS

Gsellmann, B., Huemer, W., Vallant, R. & Sommitsch, C., 2015.

Research output: Contribution to conferencePaperResearch

Cracks on the Roots of Turbine Blades of the Low-Pressure Turbine in a Steam Power Plant

Plesiutschnig, E., Vallant, R., Stöfan, G., Sommitsch, C., Mayr, M., Marn, A. & Heitmeir, F., 2015, In : Practical metallography = Praktische Metallographie. 52, 4, p. 214-225

Research output: Contribution to journalArticleResearchpeer-review

Creep and damage investigation of advanced martensitic chromium steel weldments for high temperature applications in thermal power plants

Schlacher, C., Beal, C., Sommitsch, C., Mitsche, S. & Mayr, P., 2015, In : Science and technology of welding and joining. 20, 1, p. 82-90

Research output: Contribution to journalArticleResearchpeer-review

Creep and damage investigations of MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 2015, (Accepted/In press) Advanced High-Temperature Materials Technology for Sustainable and Reliable Power Engineering. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Damage analysis of a cracked low-pressure steam turbine blade

Plesiutschnig, E., Vallant, R., Enzinger, N. & Sommitsch, C., 28 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Open Access
File

Effect of Melting on the Hot Ductility of Continuously Cast Steels

Caliskanoglu, O., Zamberger, S., Beal, C. & Sommitsch, C., 2015, The 6th International Congress on the Science and Technology of Steelmaking (ICS2015). Peking: China Machine Press, p. 512-515

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Effect of Pass Number, Rotational and Traverse Speed on Particle Distribution and Microstructure of AZ31/SiC Composite Produced by Friction Stir Processing

Jabbari, A. H., Sedighi, M., Vallant, R., Hütter, A. & Sommitsch, C., 2015, In : Key engineering materials. 651-653, p. 765-770

Research output: Contribution to journalArticleResearchpeer-review

Electron Beam Processing for the Production of Model Alloys

Spenger, T., Enzinger, N., Hofer, F., Simic, S., Sommitsch, C. & Wiednig, C. A., 21 Sep 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Electron Beam Welding of thick walled Copper components

Enzinger, N., Loidolt, P., Wiednig, C. A., Stütz, M. & Sommitsch, C., 3 Nov 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Evolution of creep damage in MARBN welded joints

Schlacher, C., Dikovits, M., Sommitsch, C. & Mayr, P., 29 Jun 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ferritische Phasenumwandlung zur Verbesserung der Kriecheigenschaften von martensitischen 9 - 13 % Cr Stählen

Plesiutschnig, E. & Sommitsch, C., 27 Nov 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Ferritische Phasenumwandlung zur Verbesserung der Kriecheigenschaften von martensitischen 9 - 13 % Cr Stählen

Plesiutschnig, E., Sommitsch, C., Zeiler, G. & Paul, S., 2015, 38. Vortragsveranstaltung Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe. Düsseldorf: Forschungsvereinigung Warmfeste Stähle und Hochtemperaturwerkstoffe, p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Foreword

Sommitsch, C. & Hribernik, B., 1 Jan 2015, 8th European Stainless Steel and Duplex Stainless Steel Conference 2015. 1 p.

Research output: Chapter in Book/Report/Conference proceedingForeword/postscriptResearch

Hot deformation behavior of a 3rd generation advanced high strength steel with a Medium-Mn content

Steineder, K., Dikovits, M., Beal, C., Sommitsch, C., Krizan, D. & Schneider, R., 2015, In : Key engineering materials. 651-653, p. 120-125

Research output: Contribution to journalArticleResearchpeer-review

Hybrid processing of AZ91 Magnesium alloy/nano-Al2O3 composites

Yadav, S. D., Bhingole, P. P., Chaudhari, G. P., Nath, S. K. & Sommitsch, C., 2015, In : Key engineering materials. 651-653, p. 783-788

Research output: Contribution to journalArticleResearchpeer-review

Improvement of the corrosion behaviour of AZ91 via friction stir processing

Huemer, W., Hahn, C., Hütter, A., Valiant, R. & Sommitsch, C., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. Austrian Society for Metallurgy and Materials (ASMET), p. 1156-1165 10 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of creep damage in advanced martensitic chromium steel weldments using synchrotron X-ray micro-tomography and EBSD

Schlacher, C., Pelzmann, T., Beal, C., Sommitsch, C., Gupta, C., Toda, H. & Mayr, P., 2015, In : Materials science and technology. 31, 5, p. 516-521

Research output: Contribution to journalArticleResearchpeer-review

Investigation on the microstructural evolution in a Medium-Mn steel (X10Mn5) after intercritical annealing

Steineder, K., Schneider, R., Krizan, D., Beal, C. & Sommitsch, C., 2015, In : HTM - journal of heat treatment and materials. 70, 1, p. 19-25

Research output: Contribution to journalArticleResearch

Investigations on Precipitation Evolution of MarBN Steels for Microstructure Based Life - Time Assessments

Plesiutschnig, E., Vujic, S. & Sommitsch, C., 29 Jun 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Microstructure Evolution and Hardness Distribution in Al Wires Subjected to Simultaneous Tension-Torsion Deformation

Pourbashiri, M., Sedighi, M., Poletti, M. C. & Sommitsch, C., 2015, In : Key engineering materials. 651-653, p. 771-776

Research output: Contribution to journalArticleResearchpeer-review

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 2015, International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. ., p. 1-8

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Modeling wear and rolling contact fatigue: Parametric study and experimental results

Trummer, G., Marte, C., Scheriau, S., Dietmaier, P., Sommitsch, C. & Six, K., 30 Aug 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Modelling the flow stress of aluminum alloys during hot and cold deformation

Bureau, R., Poletti, M. C. & Sommitsch, C., 11 Jan 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Numerical Simulation of Material Flow in AA6082 During Friction Stir Spot Welding

Gao, Z., Wang, P., Cheng, D., Niu, J. & Sommitsch, C., 2015, In : Engineering Review. Vol. 35, Issue 3, p. 283-289

Research output: Contribution to journalArticleResearchpeer-review

File
Spot welding
Friction
Computer simulation
Strain rate
Compaction

Optimized microstructure for an increased creep rupture strength of MarBN steels

Plesiutschnig, E., Beal, C., Paul, S., Zeiler, G. & Sommitsch, C., 2015, In : Materials at high temperatures. 32, 3;32.03, p. 318-322

Research output: Contribution to journalArticleResearchpeer-review

Osteoblastic cell behaviour on surface structured titanium alloys obtained by electron beam technique

Ramskogler, C., Mostofi, S., Warchomicka, F. G., Weinberg, A. & Sommitsch, C., 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Precipitation evolution and creep strength modelling of 25Cr20NiNbN austenitic steel

Vujic, S., Sandström, R. & Sommitsch, C., 1 Nov 2015, In : Materials at high temperatures. 32, 6, p. 607-618 12 p.

Research output: Contribution to journalArticleResearchpeer-review

creep strength
Austenitic steel
hardening
Creep
steels

Preface

Ofenheimer, A., Poletti, C., Schalk-Kitting, D. & Sommitsch, C., 2015, In : Key engineering materials. 651-653

Research output: Contribution to journalEditorialResearchpeer-review

Relation between prior austenite grain size creep rupture life and pore evolution of 9% Cr steels

Plesiutschnig, E., Dikovits, M., Prodinger, D., Sommitsch, C., Wallner, S. & Zeiler, G., 2015.

Research output: Contribution to conferencePosterResearch

Study on governing parameters of thermal history during underwater friction stir welding

Papahn, H., Bahemmat, P., Haghpanahi, M. & Sommitsch, C., 1 May 2015, In : International Journal of Advanced Manufacturing Technology. 78, 5-8, p. 1101-1111 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Friction stir welding
Underwater welding
Heat transfer
Welding
Boiling liquids

Surface Modification of pure magnesium and magnesium alloy AZ91 by Friction Stir Processing

Hütter, A., Huemer, W., Ramskogler, C., Warchomicka, F. G., Lachehab, A., Vallant, R. & Sommitsch, C., 15 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

Surface Modification of pure magnesium and magnesium alloy by Friction Stir Processing

Hütter, A., Huemer, W., Ramskogler, C., Warchomicka, F. G., Lachehab, A., Vallant, R. & Sommitsch, C., 2015, In : Key engineering materials. 651-653, p. 796-801

Research output: Contribution to journalArticleResearchpeer-review

Surface structuring by electron beam technique in titanium grade 2 and Ti6Al4V for biomedical application

Ramskogler, C., Warchomicka, F. G., Sommitsch, C., Mostofi, S. & Weinberg, A., 2015, Surface structuring by electron beam technique in titanium grade 2 and Ti6Al4V for biomedical application. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

grade
titanium
electron beams
topography
cells

Vorhersage der lokalen Warmrissbildung beim industriellen Stahlguss

Hadžić, S., Hanus, R. & Sommitsch, C., 23 Apr 2015.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch

2016

Additive Manufacturing via Cold Metal Transfer

Stockinger, J., Wiednig, C. A., Enzinger, N., Sommitsch, C., Huber, D. & Stockinger, M., 24 Nov 2016, Metal Additive Manufacturing Conference: Industrial perspective in Additive Technologies. Linz, p. 117-125

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Al-Mg-Sc Stringer: Von der Grundlagenuntersuchung zum Prototypen

Tändl, J., Anders, K., Janisch, S. D., Kerstan, H., Palm, F., Entelmann, W., Gradinger, R., Poletti, M. C. & Sommitsch, C., 9 Nov 2016.

Research output: Contribution to conference(Old data) Lecture or PresentationResearch