Projects per year
Projects 1995 2023
Active
K1-Met P2.3 - Thermomechanical modlling of continuous casting and hot rolling
1/07/19 → 30/06/23
Project: Research project
NAT - New developments in anchor technique
Haas, F., Rebhan, M. & Sommitsch, C.
1/06/19 → 30/06/21
Project: Research project
CarbonNanoMCW - High Strength Aluminium Metal Cored Wire for Beam based Additive Layer Manufacturing
1/07/18 → 30/06/20
Project: Research project
MCL Creep - Development of a ferritic creep resistant steel with superior creep strength and creep fatigue resistance
1/01/18 → 31/12/20
Project: Research project
Dissertation Simone Kaar - Development of lean medium Mn Q&P steels
1/10/17 → 30/09/20
Project: Research project
Materials Development
Dikovits, M., Sommitsch, C., Caliskanoglu, O., Schlacher, C., Beal, C., Djuric, D., Vujic, S., Pein, C., Krumphals, F., Kuduzovic, A. & Halici, D.
1/03/09 → …
Project: Research area
Advanced Materials Science
Djuric, D., Sommitsch, C., Mayr, P., Radis, R., Mendez Martin, F., Enzinger, N., Kuduzovic, A., Schlacher, C., Vallant, R., Sonderegger, B., Pein, C., Krumphals, A. & Krumphals, F.
1/10/08 → …
Project: Research area
Joining Technology
Tasic, P., Saberi, S., Figner, G., Maalekian, M., Vallant, R., Hütter, A., Galler, M., Enzinger, N., Rahman, M. M., Weinberger, T. & Sommitsch, C.
1/06/05 → …
Project: Research area
Microstructure Modelling and Simulation
Krumphals, F., Sonderegger, B., Candic, M., Krumphals, A., Pein, C., Sommitsch, C., Sherstnev, P. & Pschera, R. O.
1/01/02 → …
Project: Research area
Microstructure Modelling and Simulation
Sonderegger, B., Kozeschnik, E., Holzer, I., Sommitsch, C. & Pein, C.
1/01/02 → …
Project: Research project
Finished
HISCC UHSS - Improvement of hydrogen induced stress corrosion cracking resistance of ultra-high strength steel screws and fasteners
Sommitsch, C., Ahmed, H. A. E. & Vallant, R.
1/07/18 → 31/12/18
Project: Research project
Hydrovation - Top qualitfication programm for hydrovation technology
Sommitsch, C., Schenk, A. & Hacker, V.
1/01/17 → 31/12/18
Project: Research project
Hydrovation - Qualifizierungsnetzwerke
Stöfan, G., Sommitsch, C., Vallant, R. & Enzinger, N.
1/01/17 → 31/12/18
Project: Research project
Simple Heat - Efficient heat recovery from exhaust gas streams of biomass firing by optimised materials selection
1/04/15 → 31/03/17
Project: Research project
ESW - Eisenwerk Sulzau-Werfen - Special material for surface sensitive applications in hot rolling mills
1/03/15 → 1/03/18
Project: Research project
Mitsubishi Heavy Industries - Development of precipitation simulation method for FGHAZ in mod.9Cr-1Mo steels
1/07/14 → 30/09/15
Project: Research project
AURA - Development of pool roofings on the basis of walk-on-water-technology
1/05/14 → 31/05/15
Project: Research project
EU-Z-ultra - Z phase strengthened steels for ultra-supercritical power plants [Original in Deutsch: Durch Z-Phase gehärtete Stähle für ultra-überkritische Kraftwerke]
Sonderegger, B., Sommitsch, C., Poletti, M. C. & Yadav, S. D.
1/02/13 → 31/01/16
Project: Research project
OscAR - Austrian supply chain for aluminum fuselage components
Sommitsch, C., Tändl, J. & Poletti, M. C.
1/01/13 → 31/12/15
Project: Research project
EU - DAFNE - Development of gamma-TiAl forgings in a low-cost near conventional hot-die process and process evaluation
1/01/12 → 31/12/14
Project: Research project
EU - MACPLUS - Component Performance-driven Solutions for Long-Term Efficiency Increase in Ultra Supercritical Power Plants
Mayr, P., Vujic, S., Schlacher, C. & Sommitsch, C.
1/01/11 → 30/04/15
Project: Research project
TooLAM - Thermomechanical modelling of laser-assisted face milling process
Zamani, A., Sonderegger, B. & Sommitsch, C.
1/09/10 → 31/08/13
Project: Research project
Kompetenznetzwerk für Fügetechnik JOIN4+
Mucic, K., Vallant, R., Kicin, M., Galler, M., Wittwer, L., Enzinger, N., Rahman, M. M. & Sommitsch, C.
1/03/10 → 31/05/14
Project: Research project
CD-Laboratory for Materials Modelling and Simulation, Module 5: Online simulation of seamless pipe production within the process chain
Timoshenkov, A. & Sommitsch, C.
1/01/10 → 31/12/13
Project: Research project
CD-Laboratory for Materials Modelling and Simulation, Module 7: Process advance of heavy steel component casting by reduction of hot-tear-defect-volume
Sommitsch, C. & Hadzic, S.
1/10/09 → 31/01/13
Project: Research project
K1-MET: 3.3 Thermomechanical modelling - Thermomechanical Modelling of Continuous Causting and hot rolling
Sommitsch, C., Djuric, D. & Caliskanoglu, O.
1/04/09 → 30/06/15
Project: Research project
CD-Laboratory for Materials Modelling and Simulation, Module 2: Microstructure modelling of the alpha-beta-titanium alloy Ti-6Al-4V during thermo-mechanical heat treatment
Krumphals, A. & Sommitsch, C.
1/01/09 → 31/01/13
Project: Research project
Modelling and simulation of simultaneous diffusion and precipitation in heterogeneous materials during surface treatment (MCL SP19)
Sonderegger, B., Sommitsch, C. & Kozeschnik, E.
1/10/06 → 31/12/10
Project: Research project
CD-Laboratory for Materials Modelling and Simulation
Friedl, T., Hadzic, S., Timoshenkov, A., Herbitschek, L., Kuduzovic, A., Penker, H., Krumphals, F., Krumphals, A. & Sommitsch, C.
1/02/06 → 31/01/13
Project: Research project
Curtailed
Lifetime prediction of tools made of hot work steels (CDL Materials Modelling and Simulation module 3)
1/01/07 → 31/12/13
Project: Research project