Research Output 2003 2019

Filter
Conference contribution
2003

Manufacturing of Automotive Parts using Active Hydromechanical Sheet Metal Forming

Kolleck, R., 2003, 18th International Conference on Computer-Aided Production Engineering. ., p. 395-400

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2004

Direktes und indirektes Presshärten borlegierter Stähle - Möglichkeiten und Grenzen

Kolleck, R. & Feindt, J-A., 2004, Neuere Entwicklungen in der Blechumformung. Stuttgart: Informationsgesellschaft Verlag, p. XX-XX

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Manufacturing methods for safety and structure body pars for lightweight body design

Kolleck, R., Feindt, J-A., Lenze, F-J. & Heller, T., 2004, Proceedings of the 23th International Deep Drawing Research Group Congress IDDRG. Stuttgart: ., p. 167-173

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Technology Update - Hot Forming, Applications and Benefits

Kolleck, R., 2004, 9th Annual Symposium & Workshops - Metalforming Technology Solutions & Trends for Automotive Suppliers. Canton, Michigan 48187 USA: ., p. 0-0 (9th Annual Symposium & Workshops - Metalforming Technology Solutions & Trends for Automotive Supplie).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2005

Forming Limits in Sheet Metal Forming for Non-Proportional Loading Conditions - Experimental and Theoretical Approach

Ofenheimer, A., Buchmayr, B., Kolleck, R. & Merklein, M., 2005, Numisheet 2005 - 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes. Detroit: American Institute of Physics, p. 460-465 (AIP Conference Proceedings 778).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Open Access
File

Innovative Schließkraftvorrichtung - Ein Weg für wirtschaftliche Wirkmedienumformung

Kolleck, R. & Eurich, E., 2005, (Accepted/In press) Innenhochdruckumformung - Kolloquium. Darmstadt: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

New Concept for Tempering Sheet Metal Forming Tools

Kolleck, R., Pfanner, S., Warnke, E. P. & Ganter, R., 2005, (Accepted/In press) Flexibility in Car Body Concepts – Key to New Market Share or Potential Trap?. Zwickau: Verl. Wiss. Scripten, Vol. 28. (Berichte aus dem IWU , Wissenschaftliche Scripten).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Press Hardening of boron steel sheets - forming and tooling technology with high potential

Kolleck, R., Lind, C. & Pfanner, S., 2005, Proceedings of the 24th International Deep- Drawing Research Group Congress IDDRG. Besancon: ., p. 1-10

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Technology Update - "Forming Technology and Vehicle Safety"

Kolleck, R., Kalcher, M. H., Kassegger, H., Lind, C. & Pfanner, S., 2005, 2nd International Conference Deformation Processing and Structure of Materials. Belgrade, Serbia and Montenegro: Department of Printing Engineering, Faculty of Technology and Metallurgy, Vol. 2nd. p. 69-76

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Technology Update - Kalt-, Warmumformung und Fahrzeugsicherheit

Kolleck, R., Pfanner, S. & Kassegger, H., 2005, Multifunktionelle Bauteile und Verfahren zur Erhöhung der Wertschöpfung in der Blechbearbeitung. Hannover: EFB, Vol. T 25. p. 37-48 (Tagungsband / Europäische Forschungsgemeinschaft für Blechverarbeitung e.V.).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Technology Update - “Forming Technology and Vehicle Safety”

Kolleck, R., Pfanner, S., Kassegger, H. & Lind, C., 2005, (Accepted/In press) International Conference on Agility at the Helsinki University of Technology. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Umformverfahren für den Karosseriebau und Fahrzeugsicherheit

Kolleck, R., Lind, C. & Pfanner, S., 2005, (Accepted/In press) International Deep Drawing Research Group (IDDRG), Deutsche Gruppe der IDDRG. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Verfahren und Anlagen zur Verarbeitung höchstfester Werkstoffe - Neuere Entwicklungen

Kolleck, R., Warnke, E. P. & Pfanner, S., 2005, Leichtbau durch Umformtechnik. Dresden: ., p. 269-276

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2006

"Cooled Tool" - New Tool Technology with high potential

Kolleck, R., Pfanner, S., Warnke, E. P. & Ganter, R., 2006, (Accepted/In press) Tooling materials and their applications from research to market. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Integrated Product Development and new Developments

Kolleck, R., 2006, (Accepted/In press) AMS Europe Conference. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Neuere Entwicklungen in der Warmumformung borlegierter Stähle - Anagen/Werkzeuge für Umformung und Schneiden

Kolleck, R., Ganter, R., Kalcher, M. H., Pfanner, S. & Raschka, S., 2006, Neuere Entwicklungen in der Blechumformung: Tagungsband. ., p. 159-170

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Neuere Entwicklungen in der Werkzeug- und Umformtechnik für automotive Anwendungen

Kolleck, R., 2006, (Accepted/In press) Neuere Entwicklungen in der Werkzeug- und Umformtechnik für automotive Anwendungen. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Neues Konzept zur Temperierung von Blechumformwerkzeugen

Kolleck, R., 2006, 2. Workshop "Aktuelle Trends im Werkzeugbau". ., p. KAP.4-KAP.4

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Newer Developments in the Development of Forming and Cutting Tools

Kolleck, R., Kalcher, M. H., Raschka, S., Pfanner, S. & Ganter, R., 2006, (Accepted/In press) Neuere Entwicklungen in der Blechumformung: Robuste Prozesse. Stuttgart: .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Service life optimization in the context of cutting high-strength and highest-strength sheet steels

Kolleck, R., Kalcher, M. H., Raschka, S., Lind, C., Winklhofer, J., Danzinger, J. & Haidenthaler, W., 2006, Service life optimization in the context of cutting high-strength and highest-strength sheet steels. ., p. 333-340

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Service life time optimization in the context of cutting hig-strength and highest-strength sheet steels

Kolleck, R., Danzinger, J., Haidenthaler, W., Kalcher, M. H., Raschka, S., Lind, C. & Winklhofer, J., 2006, Proceedings of the 25th International Deep Drawing Research Group Congress IDDRG. ., p. 333-340

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Verfahren, Werkzeug- und Anlagentechnologie zur Verarbeitung ultrahöchstfester Stähle

Kolleck, R., 2006, (Accepted/In press) Verfahren, Werkzeug- und Anlagentechnologie zur Verarbeitung ultrahöchstfester Stähle.. .

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2007

Concepts for the integrated product development of body in white

Kolleck, R. & Veit, R., 2007, Concepts for the integrated product development of fody in white. ., p. 423-429

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of cooled tools for press hardening of boron steel sheets

Kolleck, R., Pfanner, S. & Warnke, E. P., 2007, International Conference on Sheet Metal. ., p. 225-232

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Konstruktion und Fertigungsverfahren für den funktionsoptimierten Leichtbau mit leistungsfähigen Stahlwerkstoffen

Kolleck, R., Veit, R. & Schönberger, G., 2007, Konstruktion und Fertigungsverfahren für den funktionsoptimierten Leichtbau mit leistungsfähigen Stahlwerkstoffen. ., p. 25-36

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Optimierung gekühlter Werkzeuge für das Presshärten borlegierter Stahlbleche

Kolleck, R. & Löscher, H., 2007, Optimierung gekühlter Werkzeuge für das Presshärten borlegierter Stahlbleche. ., p. 93-102

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2008

Alternative approaches for the simulation of the hot forming process

Weiß, W., Kolleck, R., Veit, R. & Löscher, H., 2008, Numisheet 2008. Zürich: Eidgenössische Technische Hochschule Zürich, p. 621-626

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Alternative Erwärmungstechnologien für die temperierte Blechumformung

Kolleck, R., Veit, R. & Lenze, F-J., 2008, Alternative Erwärmungstechnologien für die temperierte Blechumformung. ., p. 226-227

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Alternative heating concepts for hot sheet metal forming

Kolleck, R., Veit, R., Hofmann, H. & Lenze, F-J., 2008, Alternative heating concepts for hot sheet metal forming. ., p. 239-246

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Komponententest-Weg für die zukünftige Automobilentwicklung?

Kolleck, R., Schönberger, G. & Koroschetz, C., 2008, Komponententest-Weg für die zukünftige Automobilentwicklung?. ., p. 193-204

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Möglichkeiten zur lokalen Beeinflussung der Bauteilfestigkeit beim Presshärten

Kolleck, R. & Veit, R., 2008, Möglichkeiten zur lokalen Beeinflussung der Bauteilfestigkeit beim Presshärten. ., p. 65-72

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Potentials and innovative application areas of direct laser welding for forming and cutting tools

Pfanner, S. & Kolleck, R., 2008, International Conference on Technology of Plasticity. Korea: ., p. **-**

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Untersuchung des Element- und Materialeinflusses auf die Prognosegüte der Rückfederungssimulation von hoch- und höchstfesten Stählen SIMVEC

Kolleck, R., Leitner, C., Trattnig, G., Behrens, B-A. & Sabitovich, A., 2008, Untersuchung des Element- und Materialeinflusses auf die Prognosegüte der Rückfederungssimulation von hoch- und höchstfesten Stählen SIMVEC. ., p. 169-183

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Untersuchung des Element- und Materialflusses auf die Prognosegüte der Rückfederungssimulation von hoch- und höchstfesten Stählen

Leitner, C., Trattnig, G., Sabitovic, A., Kolleck, R. & Behrens, B-A., 2008, VDI-Berichte/VDI-Tagungsbände. ., p. 169-184

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Wirkmedienbasierte Blechumformung mit Gas

Kolleck, R., Koroschetz, C. & Veit, R., 2008, Wirkmedienbasierte Blechumformung mit Gas. ., p. 79-89

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

2009

Bewertung der Wechselwirkungen zwischen Werkzeug- und Blechwerkstoff beim Presshärten

Weiß, W., Raschka, S., Kolleck, R., Veit, R. & Aspacher, J., 2009, Tagungsband zum 4. Erlanger Workshop Warmblechumformung. Bamberg: Meisenbach, p. 205-216

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation on induction heating strategies for hot stamping of boron alloyed steels

Kolleck, R., Veit, R., Merklein, M., Lechler, J. & Geiger, M., 2009, General Assembly. ., p. 00-00

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

New Tool Technologies for Presshardening of boron Steel Materials

Kolleck, R., Veit, R. & Christian, K., 2009, Material Property Data for More Effective Numerical Analysis. ., p. 825-834

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Optimization of Weakly coupled Multiphysical Problems using Object Oriented Programming

Jaindl, M., Reinbacher-Köstinger, A., Kutschera, R., Magele, C. & Renhart, W., 2009, Proceedings of the 17th Conference on the Computation of Electromagnetic Fields. ., p. 430-431

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Technologien zur Erweiterung der Verfahrensgrenzen

Kolleck, R., Veit, R., Hofmann, H. & Heller, T., 2009, 3. ICAFT 2009 und 16. Sächsische Fachtagung Umformtechnik. ., p. 00-00

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Tools and Technologies for Hot Forming with local Adjustment of Part Properties

Kolleck, R. & Veit, R., 2009, Tools and Technologies for Hot Forming with local Adjustment of Part Properties. ., p. 00-00

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2010

A New Method in Manufacturing Near-Surface Cooling Channels for Tempered Tools

Weiß, W., Kolleck, R. & Vollmer, R., 2010, Proceedings of the 13th International Conference on Metal Forming. Stahleisen, p. 880-883

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of Laser Cladding in Forming and Cutting Processes - Functionally Graded Coatings

Weiß, W., Vollmer, R. & Kolleck, R., 2010, International Conference on Advances in Materials and Processing Technologies (AMPT2010). Melville, New York: American Institute of Physics, Vol. 1315. p. 1151-1156 (AIP Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Concepts using Carbon Fibre Reinforced Plastic for Micro Punching Tools

Vollmer, R., 2010, iddrg Conference Proceedings. Graz: Technische Universität Graz, p. 275-280

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Cooling of Tools for Hot Stamping Applications

Weiß, W., Kolleck, R. & Mikoleizik, P., 2010, Tools and Technologies for the Processing of Ultra High Strenght Steels. Graz: Verlag der Technischen Universität Graz, p. 111-119

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearch

Direct Laser Deposition of Cu Alloy on forming tool surfaces – how angular position of surface and powder nozzle influences process window and mechanical properties?

Kolleck, R., Schmidt, M., Grimm, A., Veit, R. & Bartkowiak, K., 2010, 60th CIRP General Assembly. ., p. 00-00

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Innovative high and ultra high strength steel concepts for cold forming applications

Kolleck, R., Raschka, S., Krech, D., Thülig, T. & Zwickel, G., 2010, IDDRG Conference. ., p. 213-224

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

2011

Current and future trends in the field of hot stamping of car body parts

Kolleck, R. & Veit, R., 2011, SCT2011. Stahleisen GmbH, p. 67-74

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development and Investigation of a Modular Tool Concept Based on Polymer Elements

Süß, R., Kolleck, R. & Koroschetz, C., 2011, AIP Conference Proceedings. ., p. 282-287

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Development of a close-to-production prototype of an induction heating device for hot stamping of boron alloyed steels

Gasser, C., Kolleck, R., Veit, R. & Wilfinger, G., 2011, SCT 2011. Düsseldorf: Stahleisen GmbH, p. 83-90

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review