Research Center Pharmaceutical Engineering (RCPE) (98888)

  • 8010

    Inffeldgasse 13 Graz

    Austria

Research Output 1991 2019

Filter
Poster
2018

Formulation and methodological assessment of patient centric technologies for solid oral dosage forms (SODF)

Drumond, N. & Stegemann, S., 22 Mar 2018.

Research output: Contribution to conferencePosterResearchpeer-review

Open Access
File
2017

An in vitro method to predict the coating influence on esophageal adhesion and gliding performance of solid oral dosage forms

Drumond, N. & Stegemann, S., 14 Nov 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Dosage Forms
Mucins
Deglutition
Metals
Swallows

In vitro methods based on mechanical forces to assess the mucoadhesive potential of water-soluble polymers: Modified balance/surface tensiometer

Drumond, N. & Stegemann, S., 29 Mar 2017.

Research output: Contribution to conferencePosterResearchpeer-review

Polymers
Water
Adhesives
Dosage Forms
Pharmaceutical Preparations
2016

Application of Model-Predictive Control to a Feeding Blending Unit

Rehrl, J., Kruisz, J., Sacher, S., Horn, M. & Khinast, J., 14 Nov 2016.

Research output: Contribution to conferencePosterResearchpeer-review

A rheological method to predict mucoadhesion between dosage form excipients and human saliva

Drumond Freitas, N. D. & Stegemann, S., 30 Mar 2016.

Research output: Contribution to conferencePosterResearchpeer-review

File
Excipients
Dosage Forms
Saliva
Polymers
Deglutition

CFD-DEM Simulation of Wet Fluidized Beds

Askarishahi, M., Salehi, M. & Radl, S., 14 Sep 2016.

Research output: Contribution to conferencePosterResearchpeer-review

File

Development of a Model-Based Control Concept for a Direct Compaction Process

Kruisz, J., Rehrl, J., Martinetz, M., Sacher, S., Horn, M. & Khinast, J., 2016.

Research output: Contribution to conferencePosterResearch

Light in Powder - Penetration and Information

Scheibelhofer, O., Wahl, P., Larchevêque, B. & Khinast, J., 21 Mar 2016.

Research output: Contribution to conferencePosterResearch

Liquid Transport in Bi-disperse Particle Beds revealed by Direct Numerical Simulations

Wu, M., Khinast, J. & Radl, S., 14 Sep 2016, p. 1. 1 p.

Research output: Contribution to conferencePosterResearch

Open Access
File
Direct numerical simulation
Liquids
Pharmaceutical Preparations
Industry

NIR-Hyperspectral Imaging and Raman Chemical Mapping of Multilayer-Tablets

Poms, J., Scheibelhofer, O., Sacher, S. & Khinast, J., 30 Mar 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Optimization of a Micro-Feeding Unit in a Continuous Pharmaceutical Process Line

Hörmann, T., Tausendschön, J., Schmid, T., Koscher, G. & Khinast, J., 21 Apr 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Patient Appropriateness in Product Design: Systematic Review of Clinical Evidence

Drumond, N. & Stegemann, S., 14 Nov 2016.

Research output: Contribution to conferencePosterResearchpeer-review

File
Pharmaceutical Preparations
Drug Design
Dosage Forms
Population Groups
Age Groups

Process Development for Continuous Extrusion and Pelletization of a Heat and Shear-Sensitive Formulation

Hörmann, T., Laske, S., Koscher, G. & Khinast, J., 14 Nov 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Real-Time Monitoring and Ejection of out-of-Spec Tablets Via NIR Chemical Imaging

Wolfgang, M., Wahl, P., Hauseder, G., Sacher, S., Kerschhaggl, M. & Khinast, J., 14 Nov 2016.

Research output: Contribution to conferencePosterResearchpeer-review

Speed change experiments in a rotary tablet press

Martinetz, M., Aigner, I., Rehrl, J., Sacher, S. & Khinast, J., 3 Oct 2016.

Research output: Contribution to conferencePosterResearchpeer-review

2015

Accuracy of micro powder dosing via a vibratory sieve-chute system

Faulhammer, E., Besenhard, M., Paudel, A., Khinast, J., Llusa, M., Biserni, S., Calzolari, V. & Ferrari, A., 2015.

Research output: Contribution to conferencePosterResearch

Advanced in silico modelling of the performance of inhalation products

Salar-Behzadi, S., Wu, S., Claudia, M., Stranzinger, S., Mercuri, A., Mohr, S., Bresciani, M., Khinast, J. & Eleonore, F., 2015.

Research output: Contribution to conferencePosterResearch

Creating a Design Space for the scale up of a low-dose dosator capsule filling process for inhalation products

Faulhammer, E., Llusa, M., Khinast, J., Biserni, S. & Calzolari, V., 2015.

Research output: Contribution to conferencePosterResearch

Crystallization kinetics of inhalable size amorphous salbutamol as a function of relative humidity and temperature

Zellnitz, S., Narygina, O., Resch, C., Schröttner, H. & Paudel, A., 2015.

Research output: Contribution to conferencePosterResearch

Dissolution of Tacrolimus from Modified Release Formulations under Biorelevant Conditions

Mercuri, A., Sattler, R., Stranzinger, S., Wu, S., Mohr, S., Salar-Behzadi, S. & Eleonore, F., 2015.

Research output: Contribution to conferencePosterResearch

Evaluation of the surface free energy of inhalable powders

Pinto, J., Zellnitz, S., Bresciani, M., Khinast, J., Roblegg, E. & Paudel, A., 2015.

Research output: Contribution to conferencePosterResearch

Influence of Calu-3 permeability on in silico pharmacokinetic prediction of inhalation products

Wu, S., Mercuri, A., Salar-Behzadi, S., Schiaretti, F., Zambelli, E., Brogin, G., Govoni, M., Meindl, C., Stranzinger, S., Mohr, S., Bresciani, M. & Fröhlich, E., 2015.

Research output: Contribution to conferencePosterResearch

Influence of Papp values on prediction of plasma levels by in silico modeling of inhalation products

Salar-Behzadi, S., Claudia, M., Stranzinger, S., Dzidic, N., Mohr, S., Wu, S., Mercuri, A., Andreas, Z. & Eleonore, F., 2015.

Research output: Contribution to conferencePosterResearch

In Vitro-In Vivo correlations for nifedipine IR capsules: the Impact of Hydrodynamics and Ethanol

Mercuri, A., Fares, R., Bresciani, M. & Nikoletta, F., 2015.

Research output: Contribution to conferencePosterResearch

Monitoring of a Hot Melt Coating Process

Scheibelhofer, O., Hohl, R., Salar-Behzadi, S., Haack, D., Koch, K., Kerschhaggl, P., Lochmann, D., Sacher, S. & Khinast, J., 2015.

Research output: Contribution to conferencePosterResearch

Multi-methodological investigation on the variability in the microstructure of HPMC capsules

Faulhammer, E., Wahl, V., Markl, D., Khinast, J., Paudel, A. & Lawrence, S., 2015.

Research output: Contribution to conferencePosterResearch

Printed medicine for personalized applications

Pichler, H., Planchette, C., Wimmer-Teubenbacher, M., Paudel, A., Hsiao, W. K., Stegemann, S. & Khinast, J. G., 28 Apr 2015.

Research output: Contribution to conferencePosterResearchpeer-review

QbD based model development for continuous pharmaceutical manufacturing

Kruisz, J., Rehrl, J., Gruber, A. F. & Khinast, J., 2015.

Research output: Contribution to conferencePosterResearch

Open Access
File

Quality risk management to develop a control strategy for a pharmaceutical lipid solvent-free hot melt coating process

Stocker, E., Salar-Behzadi, S., Hohl, R., Sacher, S. & Khinast, J., 2015.

Research output: Contribution to conferencePosterResearch

The Use of SAXS for Predicting Dissolution Rates of Lyophilized Fibrinogen

Wahl, V., Saurugger, E-M., Khinast, J. & Laggner, P., 2015.

Research output: Contribution to conferencePosterResearch

Vacuum Compression Molding as Screening Approach for Hot-Melt Extruded Dosage Forms

Hörmann, T., Treffer, D. F., Fiedler, D., Rustige, S., Koscher, G. & Khinast, J., 11 Nov 2015.

Research output: Contribution to conferencePosterResearchpeer-review

2014

100% Monitoring of Manufactured Tablets with NIR Chemical Imaging

Wahl, P., Scheibelhofer, O., Sacher, S., Kerschhaggl, P. & Khinast, J., 2014.

Research output: Contribution to conferencePosterResearch

Application of in silico models to predict the lung deposition of inhaled drugs

Salar-Behzadi, S., Mercuri, A., Wu, S. & Eleonore, F., 2014.

Research output: Contribution to conferencePosterResearch

Comparison of two in silico models to assess lung deposition of inhaled salbutamol

Mercuri, A., Salar-Behzadi, S., Wu, S. & Eleonore, F., 2014.

Research output: Contribution to conferencePosterResearch

Creating a design space for low dose capsule filling of products for inhalation

Faulhammer, E., Llusa, M., Fink, M., Lawrence, S. M., Calzolari, V., Biserni, S. & Khinast, J., 2014.

Research output: Contribution to conferencePosterResearch

Development of a drug abuse-alcohol-resistant formulation produced via hot-melt extrusion

Jedinger, N., Khinast, J. & Roblegg, E., 2014.

Research output: Contribution to conferencePosterResearch

Development of lipophilic hot-melt extruded alcohol-resistant pellets containing nicomorphine

Jedinger, N., Mohr, S., Khinast, J. & Roblegg, E., 2014.

Research output: Contribution to conferencePosterResearch

Feedback Control for a Continuious Crystallization Process

Besenhard, M., Ho, C-D., Neugebauer, P., Eder, R. & Khinast, J., 2014.

Research output: Contribution to conferencePosterResearch

How does alcohol impact hot-melt extruded pellets comprising solid lipids as functional additives?

Jedinger, N., Khinast, J. & Roblegg, E., 2014.

Research output: Contribution to conferencePosterResearch

Investigation of surface modified glass beads as potential carriers in dry powder inhalers

Zellnitz, S., Kappl, M., Schröttner, H. & Urbanetz, N. A., 2014.

Research output: Contribution to conferencePosterResearch

Microdosing / Microfeeding of Pharmaceutical Products into Capsules

Faulhammer, E., 2014.

Research output: Contribution to conferencePosterResearch

Surface coverage of surface modified glass beads as model carriers in dry powder inhalers influences the FPF

Zellnitz, S., Schröttner, H. & Urbanetz, N. A., 2014.

Research output: Contribution to conferencePosterResearch

Tailoring drug delivery to the lung by using surface modified glass beads as model carrier

Zellnitz, S., Kappl, M. & Urbanetz, N. A., 2014.

Research output: Contribution to conferencePosterResearch