Institute of Timber Engineering and Wood Technology (2080)

  • 8010

    Inffeldgasse 24 Graz

    Austria

Research Output

Study on torque and clamping forces of screw-connected plywood

Kumpenza, C., Schmidt, G-D., Sotayo, A., Ringhofer, A. & Müller, U., 2020, In : Engineering Reports. p. 1-6 6 p.

Research output: Contribution to journalArticle

Open Access

Timber Screw Connection: Study of the Strain along the Interface Using Optical Measurement Techniques and Simulations

Kumpenza, C., Ringhofer, A., Krenke, T., Sotayo, A., Pramreiter, M. & Müller, U., 2020, In : BioResources . 15, 2, p. 3859-3873 15 p.

Research output: Contribution to journalArticle

Open Access
2019
Open Access

Block shear failure mechanism of axially-loaded groups of screws

Mahlknecht, U. & Brandner, R., 2019, In : Engineering Structures. 183, p. 220-242 23 p.

Research output: Contribution to journalArticle

Duration of Load Effect on Axially-Loaded Self-Tapping Screws Inserted Parallel to Grain in Soft- and Hardwood

Brandner, R., Ringhofer, A. & Sieder, R., 2019, INTER - International Network on Timber Enfineering Research. p. 1-20

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimentelle und numerische Untersuchungen des hygrothermischen Verhaltens von Brettsperrholz am Beispiel einer Außenwand

Translated title of the contribution: Experimental and numerical investigations of the hygrothermal behaviour of cross laminated timber using the example of an exterior wallGanster, K., Ringhofer, A. & Schickhofer, G., 1 Oct 2019, Bauphysik, 41, 5, p. 252-268 17 p.

Research output: Contribution to specialist publicationArticle

Performance of axially-loaded self-tapping screws in hardwood: Properties and design

Brandner, R., Ringhofer, A. & Reichinger, T., 1 Jun 2019, In : Engineering Structures. 188, p. 677-699 23 p.

Research output: Contribution to journalArticle

Probleme und Lösungsansätze für die Verschraubung in Hartlaubholzprodukten

Brandner, R., Ringhofer, A. & Scheibenreiter, J., 2019, Internationales Holzbau-Forum IHF'19. p. 1-22

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Product Characteristics of Self-Tapping Timber Screws

Ringhofer, A. & Schickhofer, G., 2019, INTER - International Network on Timber Enfineering Research. p. 1-20

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Properties of axially loaded self-tapping screws with focus on application in hardwood

Brandner, R., 3 Sep 2019, In : Wood Material Science and Engineering. 14, 5, p. 254-268 15 p.

Research output: Contribution to journalArticle

Strategies for a safe integration of water-bearing MEP systems in prefabricated CLT room modules

Monsberger, M., Schickhofer, G., Magg, A-K., Ganster, K., Neumayer, M., Bretterklieber, T. & Kaufmann, C., 24 May 2019, Proceedings of the 2019 Modular and Offsite Construction (MOC) Summit. Banff, Alberta, Canada, p. 397-404 (Modular and Offsite Construction (MOC) Summit Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Verdichtung von Dachräumen von Altbaubeständen mittels modularen Holzbaus

Matzler, D., Ringhofer, A. & Schickhofer, G., 2019, In : OIB aktuell. 2019, 4, p. 22-25 4 p.

Research output: Contribution to journalArticle

2018

[M]odul und Raster - Das n*[M] der Standardisierung und Vorfertigung

Schickhofer, G. & Ganster, K., 30 Aug 2018, Vorfertigen und Modularisieren im Holzbau. p. A-1-A-40 40 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of European design principles to cross laminated timber

Fink, G., Kohler, J. & Brandner, R., Sep 2018, In : Engineering Structures. 171, p. 934-943

Research output: Contribution to journalArticle

Basis of design principles – application to CLT

Fink, G., Brandner, R. & Kohler, J., 2018, Basis of Design Principles for Timber Structures: A state-of-the-art report by COST Action FP1402 / WG 1. Fink, G., Honfi, D., Kohler, J. & Dietsch, P. (eds.). Aachen: Shaker-Verlag GmbH, p. 111 114 p. (Berichte aus dem Bauwesen).

Research output: Chapter in Book/Report/Conference proceedingChapter

Cross laminated timber (CLT): Design approaches for dowel-type fasteners and connections

Ringhofer, A., Brandner, R. & Blaß, H. J., 2018, In : Engineering Structures. 171, p. 849-861

Research output: Contribution to journalArticle

Design Approaches for CLT Connections

Mohammad, M., Blaß, H. J., Salenikovich, A., Ringhofer, A., Line, P., Rammer, D., Smith, T. & Li, M., 2018, In : Wood and Fiber Science. 50, Special Issue, p. 27-47 21 p.

Research output: Contribution to journalArticle

Design approaches for dowel-type connections in CLT structures and their verification

Ringhofer, A., Brandner, R. & Blaß, H. J., 2018, Design of Connections in Timber Structures: A state-of-the-art report by COST Action F1402/WG3. Sandhaas, C., Munch-Andersen, J. & Dietsch, P. (eds.). Shaker-Verlag GmbH, p. 161-191 30 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Eurocode 5:2022 – Einführung in die neuen Abschnitte Brettsperrholz und Verstärkungen

Dietsch, P., Schickhofer, G., Brunauer, A., Tomasi, R., Hübner, U., Krenn, H., Mestek, P., Moosbrugger, T. & Wiegand, T., 5 Oct 2018, Karlsruher Tage 2018 - Holzbau: Forschung für die Praxis. Görlacher, R. & Sandhaas, C. (eds.). Karlsruhe, p. 65-84

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Influence of number of layers on embedment strength of dowel-type connections for glulam and cross-laminated timber

Tuhkanen, E., Mölder, J. & Schickhofer, G., 18 Sep 2018, In : Engineering Structures. 176, p. 361-368 8 p.

Research output: Contribution to journalArticle

Mechanical characterization of a pre-fabricated connection system for cross laminated timber structures in seismic regions

Polastri, A., Giongo, I., Angeli, A. & Brandner, R., 15 Jul 2018, In : Engineering Structures. 165, p. 705-715

Research output: Contribution to journalArticle

Properties, Testing and Design of Cross Laminated Timber

Brandner, R. (ed.), Tomasi, R. (ed.), Moosbrugger, T. (ed.), Serrano, E. (ed.) & Dietsch, P. (ed.), 2018, Aachen: Shaker-Verlag GmbH. 466 p.

Research output: Book/ReportAnthology

Raumzellenbau in Holz-Massivbauweise: Ein aktuelles Forschungsthema an der TU Graz - gemeinschaftliches Forschungsprojekt

Schickhofer, G., 31 Aug 2018, Holz-Zentralblatt, 144, 34, p. 788-789 2 p.

Research output: Contribution to specialist publicationArticle

Rolling shear: Test configurations and properties of some European soft- and hardwood species

Ehrhart, T. & Brandner, R., 1 Oct 2018, In : Engineering Structures. 172, p. 554-572 19 p.

Research output: Contribution to journalArticle

Rolling shear in cross laminated timber (CLT): Experimental study of different wood species and important parameters for strength and stiffness

Ehrhart, T. & Brandner, R., 2018, Eastern European Conference on Timber Constructions (EECTC).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Some comments on and proposals for determining the compression perpendicular to grain properties of CLT: brief summary of a recent publication

Brandner, R., 2018, Properties, Testing and Design of Cross Laminated Timber. Shaker-Verlag GmbH, p. 147 149 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Stochastic Modelling in Timber Engineering

Brandner, R., 2018

Research output: ThesisHabilitation

Test configurations for determining rolling shear properties with focus on cross laminated timber: a critical review

Ehrhart, T. & Brandner, R., 2018, Properties, Testing and Design of Cross Laminated Timber. Shaker-Verlag GmbH, p. 151 169 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2017

Axially Loaded Self-Tapping Screws in Solid Timber and Laminated Timber Products

Ringhofer, A., 22 May 2017, 599 p.

Research output: ThesisDoctoral Thesis

Axially-loaded self-tapping screws in solid timber and laminated timber products

Ringhofer, A., Schickhofer, G. (ed.) & Brandner, R. (ed.), 2017, Graz: Verlag der Technischen Universität Graz. (Monographic Series TU Graz: Timber Engineering & Technology; vol. TET 5)

Research output: Book/ReportBook

Cross laminated timber (CLT) diaphragms under shear: Test configuration, properties and design

Brandner, R., Dietsch, P., Dröscher, J., Schulte-Wrede, M., Kreuzinger, H. & Sieder, M., 2017, In : Construction & building materials. 147, p. 312-327

Research output: Contribution to journalArticle

Design approaches for dowel-type connections in CLT structures and their verification

Ringhofer, A., Brandner, R. & Blaß, H. J., 13 Sep 2017, International Conference on Connections in Timber Engineering - From Research to Standards: Proceeding of the Conference of COST Action FP1402. Brandner, R., Ringhofer, A. & Dietsch, P. (eds.). p. 80-111

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design approaches for dowel-type connections in CLT structures and their verification

Ringhofer, A., Brandner, R. & Blaß, H. J., 13 Sep 2017.

Research output: Contribution to conference(Old data) Lecture or Presentation

Evaluation and approximation of timber connection properties for displacement-based analysis of CLT wall systems

Flatscher, G., Schickhofer, G. (ed.) & Brandner, R. (ed.), 2017, Graz: Verlag der Technischen Universität Graz. (Monographic Series TU Graz: Timber Engineering & Technology; vol. TET 6)

Research output: Book/ReportBook

Hauptkuppel der TU Graz nutzbar gemacht: Erhebliches Nutzungspotenzial in 130 Jahre altem Gebäude neu erschlossen

Schickhofer, G., 29 Sep 2017, Holz-Zentralblatt, 143, 39, p. 898 899 p.

Research output: Contribution to specialist publicationArticle

Hygrothermische Langzeitmessung innerhalb einer Brettsperrholzwand im Sockelbereich – erste Ergebnisse

Ganster, K. & Schickhofer, G., 2017, Stahlbau, Holzbau und Verbundbau. p. 355-368 14 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Zimmermannsmäßige Verbindungen - Klassifizierung und Tragverhalten

Meisel, A., Apr 2017, In : Der Bauingenieur. 92, 4, p. 179 - 189 10 p.

Research output: Contribution to journalArticle

Zimmermannsmäßige Verbindungen - Klassifizierung und Tragverhalten

Meisel, A., 5 May 2017, 7. Trierer Holzbaugespräch. Becker, W. (ed.). Trier, Vol. 7. p. 98-107 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Basic and Special Design Concepts of CLT Elements loaded out-of-plane

Schickhofer, G., Thiel, A. & Dröscher, J., 25 Feb 2016. 46 p.

Research output: Contribution to conference(Old data) Lecture or Presentation